This standard specifies the verification technical requirements and verification methods for single and double slide plate type vehicle side slip test benches. This standard applies to the verification of slide plate type vehicle side slip test benches for motor vehicle safety testing. GB/T 11798.1-2001 Verification Technical Requirements for Motor Vehicle Safety Testing Equipment Part 1: Verification Technical Requirements for Slide Plate Type Vehicle Side Slip Test Benches GB/T11798.1-2001 Standard download decompression password: www.bzxz.net

1Cs 43.020:43.180
National Standard of the People's Republic of China
GB/T 11798. 1--11798. 92001
Motor vehicle safety testing equipment
Technical requirements for verification
Molor yehiele safety testing equipmentTechnical requirements of verificationIssued on April 29, 2001
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Implementation on December 1, 2001
CD/7*1798.12001
This standard is a revision of 11798-1-98.
About GB117SB1939 (72551997 G1/T11758-230) has made the following slight changes to GB117SB1939:
The various verification technical provisions are changed to "Verification Technical Provisions for Motor Vehicle Safety Testing Equipment" (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) (General Standard for Safety Equipment) G/117% in the motor vehicle safety testing equipment calibration technical parts > general title includes the following parts: Part 1 (ie G11/T1.798.1-2001): skateboard type vehicle side test bench calibration technical conditions; Part 2 (G/T:: 733.22001): road commercial reverse brake test bench calibration technical parts; Part 3 (ie G1/112793.3-2007), ￥Ting 1 year exhaust gas analyzer calibration investment Conditions: Part 4, namely B/T117H5.4-2U (1) Roller micro speedometer test bench inspection technical regulations 1st screening (ie GTV1179R.5-(H01): Paper-type smoke density test technical conditions Beijing G Department (ie GB/1.798.2 (01), for you light front illumination test instrument verification according to technical conditions: Part 7 (ie B/T[179%.-2U1): Axle (wheel> Egg only standard or technical conditions Part (1/ 11798.-?0M1: Technical conditions for the calibration of two-wheel carbon test instruments; Part 9 (ie/1117S.2001): Technical conditions for the integrated test of brake pedals. This standard shall replace GS1.795.1-18S from the date of implementation. This standard is submitted by the Ministry of Public Security of the People's Republic of China and is submitted to the Ministry of Public Security for traffic control. The drafting unit of this standard is: Traffic Management Science Research Institute of Ministry of Public Security. The main contributors of this standard are: Zhang Keda, Zeng Li, General Dajun, Zhao Weixing, Pin Qie, and Zhuang Xixiong. This standard was first issued in 1 year:
1陰因
National Standard of the People's Republic of China
Technical Conditions for Verification of Motor Vehicle Safety Testing Equipment Part 1: Verification Technical Conditions for Skateboard-Type Vehicle Side Slip Test Bench
Matar Vehicle safety testlng equripmentTechnical requirements af verificationPart:Technical requirements of yerifieatian forkideeliptesterof automotiveslippertype(B/1 11798.1-2001
The standard specifies the technical requirements and verification methods for the light-duty vehicle slip test bench (the following time is applicable to the motor vehicle safety test bench or the enterprise-made self-driving drug test bench). ? Reference standards
The provisions contained in the standard shall constitute the provisions before the release of this standard. When this standard is published, the versions shown are effective: All standards will be revised. The parties using this standard should explore the possibility of using the latest versions of the following standards. GR71 Electric flux instrument basic safety test
3 Definitions
This standard adopts the following definitions.
3.1 Slip se alig d stancc
When the vehicle is moving straight, the displacement of the front wheel steering wheel is called the sliding quantity (m/km or mm/m)
3-2 The effective length of the sliding plate is the length of the whole running upward. 4 Technical requirements
4.1 Appearance and general requirements
4.1. The platform should have a clear nameplate to indicate the equipment model, equipment name, measurement specification, factory name, manufacturer name, etc. The various fabrics such as the connection needle and the connection winding should have the meaning of the school or the company name, and the symbol mark should have the provisions of the American standard. The operation method of the fabric parts should be flexible and reliable, especially the phenomenon of movement or along. 4.1.3 The dial or the pointer should be clear, the pointer can be adjusted to zero and should not be bent out, the rotation should be smooth and accurate, there should be no jumping, and the upper band phenomenon. The mathematical formula should be accurate, the digital display value should be within 5*: the value should be kept within 4.. All parts should be complete, flexible, smooth, without obvious resistance and movement phenomenon, the adjustment mechanism should be flexible, according to the case, the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China 20010-29 Selection 2
2001120 Purchase implementation
4.2 Safety of the heart system
GBT11798.12001
4.2.7 The platform should have protective grounding, and there should be clear The grounding terminal should be connected to the grounding point through a dedicated yellow wire.
4.2.2 The safety of the electrical system of the machine should meet the requirements of the working voltage of Class 1 terminal of 6537.7-1S86 with a working voltage of more than 500V. The resistance value of the insulation should not be less than 5M.3 Zero position error
4.3.1 When the movable plate moves 3m/km, it can be restored: not exceeding ±r.2m/klml4.3.2 When it moves 1.4/km, it does not exceed ±3.3m/km. 4.3.3 Equal point displacement is prohibited: 35minn not more than 0.%m/km: 4.4 Bearing value template, not more than 0.2m/km
Equipped with printing tray Or configured on the computer-controlled motor vehicle detection line, the display value of the meter, the scanning value of the variable line computer industry display value are all in line with this regulation:
4.5 The vertical error is not more than 0.1m/m
4.5 The reporting point (the side edge is bm/kn) is not more than ±0.2m/km. 4.7 Micro-actuator force
4.7.: When the slide plate moves from zero to 0.1mml, the effective measuring length is greater than 0nmm, the slide plate action force is not greater than 0N, the effective measuring length of the slide plate is not greater than i0rm, and the potential plate action angle is not greater than V. 4.7.2 When the labor displacement is 5m/kr: the plate name is greater than 500 initial blood, and the plate movement is not greater than 120. Discharge cabinet Length is not more than 500mm. The action force is greater than 30N. 5. Verification method 5.1 Environmental conditions 5.1 Humidity: ≤ 4 5.1.2 Relative humidity: ≤ 855%, 5.1.3 Output pressure: set below 5: 5.1.4 The measurement should be carried out in an environment without pollution, vibration, humidity, and light that will affect the measurement: 5.2 Length and height of the test instrument and the test tools are shown in Table 1. Digit indicator (electrical) Dynamometer (electrical) Dynamometer 0--3 cm 0--2000 Graduation 5. 21 T.1T.Y
The measurement must be verified by the measurement department and used within the validity period. 5.3 Appearance and performance inspection
Manual inspection should meet the requirements of 4.
5.4 Electrical system safety inspectionWww.bzxZ.net
GD/T 11798.1—20C1
5.4.1 Manual inspection of the protective earthing terminal and the protective earthing state should be in accordance with the provisions of 4.2.1. 5.4.2 Insulation resistance test, disconnect the power supply of the power grid, connect the negative and positive lines connected to the grid, and open the insulation resistance test between the protective earthing terminal, which should meet the requirements of H.5.5.1 Open the movable plate locking device and turn on the power supply for preheating. 5.5.2 Push the slide plate several times gently and set the instrument to zero. 5.5.3 Remove the surface of the table and clean it: press the medical 1 to clean the micro-movement tool, use the inductive meter, percentage decay, and put the tool on the gear, so that the axis of the dial indicator rod is consistent with the moving direction of the plate, and adjust the stroke of the dial indicator to Tm and then adjust it to zero. 5.6 Delay inspection of displacement gain 5.6.1 The negative displacement is within 3m/km
Used to push the slide plate to move, when the setting display is .3m/k%, it will become a submerged plate, and observe the setting display. If the estimated step is zero, the white percentage value will be recorded in the table A1 (standard push agent), and the table will not be small. The measured push plate will be displayed as winter, and the percentage value will be recorded in Table A. Reset it once, and take the larger absolute value recorded. Use formula (1) to calculate the standard error. If it meets the requirements of 1.1, fill it in Table 41.
Zero error.r/k.
Maximum value of percentage value: mm:
Effective base length, m.
5-6.2 The slide plate moves 0.1m/km
According to the method of 5.e.1, the bracket moves n.4r/
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.