HG/T 21608-1996 Liquid loading and unloading arm HG/T21608-1996 Standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
HG/T 21608-96
Liquid Loading and Unloading Arm
1996-09—10
1997 -01—01
Ministry of Chemical Industry of the People's Republic of China
Document of the Ministry of Chemical Industry
Chemical Construction Development (1996) No. 633
Notice on the issuance of two industry standards, including "Liquid Loading and Unloading Arm"
FTYKAONTKAca
Chemical Industry Departments (bureaus, companies) of provinces, autonomous regions, municipalities directly under the Central Government, and cities with independent planning status, and all relevant design units:
The two standards, including "Polytetrafluoroethylene-rubber composite gaskets for pipe flanges", organized by the Process Piping Design Technology Center Station of the Ministry of Chemical Industry and sponsored by the Sixth Design Institute of the Ministry of Chemical Industry, have been reviewed and approved as recommended standards, with the numbers HG/T21608-96 "Liquid Loading and Unloading Arm" and HG/T21609-96 "Polytetrafluoroethylene-rubber composite gaskets for pipe flanges". They will be implemented from January 1, 1997.
These two standards are managed by the Process Piping Design Technology Center of the Ministry of Chemical Industry, and published and distributed by the Engineering Construction Standard Editing Center of the Ministry of Chemical Industry. Ministry of Chemical Industry
September 10, 1996
Industry Standard of the People's Republic of China
Liquid Loading and Unloading Arm
HG/T 21608-96
Editor: The Sixth Design Institute of the Ministry of Chemical Industry
Approval Department: Ministry of Chemical Industry
Effective Date: January 1, 1997 Engineering Construction Standard Editing Center of the Ministry of Chemical Industry
Subject Content and Applicable Scope·
Citation Index
Terms·
Structural type and basic parameters
Technical requirements
Test methods
Inspection rules
Quality certificate, marking, packaging, transportation, storage Appendix A
Appendix B
Appendix C
Appendix D
Selection principles and instructions for reduced loading and unloading arms (reference) Installation of land-based liquid loading and unloading arms (reference) Structure and dimensions of operating steel platforms (reference) Structure and dimensions of movable ladders (reference)
Preparation instructions
TYKAONKAa
Subject content and applicable scope
This standard specifies the structural type, basic parameters, technical requirements, test methods and inspection rules of liquid loading and unloading arm products.
This standard applies to land-based and marine liquid loading and unloading arms. GB 9115. 8
GB 9115. 9
GB 9115. 10
GB 9115. 18
GB 9115. 13
GB 700
GB/T 15 91 | |tt | 1
GB 7932
GB 3766
GB 7935
2·Referenced standards
TTYKAoNTKAca
PN1.0MPa (10bar) Raised face welding steel pipe flange"PNi.6MPa (16bar) Raised face welding steel pipe flange"PN2.0MPa (20bar) Raised face welding steel pipe flange"PN2.5MPa (25bar) Raised face welding steel pipe flange" (PN2.5MPa (25bar) Raised face welding steel pipe flange)PN5.0MPa (50bar) Raised face welding steel pipe flange "Technical conditions for high-quality carbon turbid structural steel"
"Carbon structural steel"
"Low alloy high-strength structural steel"||tt ||《Seamless steel pipes for conveying fluids》
《Seamless stainless steel pipes for conveying fluids》
《Hard polyvinyl fluoride pipes》
《Polypropylene pipes》
《Steel butt-welding seamless pipe fittings》
《Plastic-lined (PP, PE, PVC) steel pipes and fittings》
《Basic forms and dimensions of weld grooves for gas welding, manual arc welding and gas shielded welding》
《Overall dimensions of welds in steel structures》
Radiography and quality classification of steel fusion welding butt joints》
《General requirements for explosion-proof electrical equipment for explosive atmospheres》
《General technical conditions for pneumatic systems》
《General technical conditions for hydraulic systems》
《General technical conditions for hydraulic components》
GB/T 13384
General Technical Conditions for Electromechanical Formaldehyde Packaging
Plain Steel Pressure Vessels》
3.0.1 Liquid Loading Arm (Crane Pipe)
TYKAoNTKAca
It is composed of rotating joint, inner arm, outer arm, vertical pipe, balancer, control system and other components, and is mainly used for loading and unloading equipment of liquid media in tank trucks and tank ships. 3.0.2 Rotating Joint
It is composed of rotating parts and sealing parts, and is mainly used to connect different components of liquid loading and unloading arms for relative rotation and load-bearing parts. 3.0.3 Inner Arm
It is a component used to connect the conveying pipeline and the outer arm. 3.0.4 Outer Arm
It can rotate in the horizontal and vertical planes, and is mainly used to adjust the working position of the arm and the tank truck or tank ship.
3.0.5 Balancer
It is a component used to balance the rotation torque of the arm. www.bzxz.net
3.0.6 Working envelope range
The spatial volume that can accommodate all positions reached by the tank mouth or header. 4
Liquid loading and unloading arm
Structural type and basic parameters
Product classification
Pre-loading and top unloading
-Train
-Bottom loading and bottom unloading
-Automobile (classification as above)
Single-tube sensitive open type (manual/automatic)
Double-tube closed type (manual/automatic)
Single-tube open type
Double-tube closed type
Self-supporting———single-tube manual
Marine|Mixed support——single-tube manual/hydraulic transmission single-tube manual/hydraulic transmission
Separate support L double-tube manual/hydraulic transmission
Structural type
4.2.1 There are 12 common structure types of land-based liquid loading and unloading arms, see Table 4.2.1 and Figure 4.2. 1-1~12.
4.2.2 There are 4 common structural types of marine liquid loading and unloading arms, see Table 4.2.2 and Figure 4. 2. 2- 1~~4.
No reading Jiang type
Gas type
Counterweight Xie Jian rod type
Elastic Guijiang gas year type
Diversion outlet
Flange connected outlet: 1
Top connection type
Injection printing
: Rotating flange pole outlet
Shaped with Bei gas family law Xing connected outlet
Consider the return gas mass vertical pipe
World gas closed pipe outlet
Open type God shrink pipe ratio! ：
Uninduced pipe
Liu Jun re-olefin pipe
Polyethylene camp
Soft oxygen ethylene culture pipe
Over the case of four questions of steel moss
Xin Department of the lower connection type
Referring to the person's teeth
Medical Department of the second Lang type
Huai people's installation companion
People's suitable
Fa Reading Er back
A: - 512
Fa: Connection type
Da Lan's wisdom
Flange installation liver
oaLill
'KAoNrKAca
Table 4. 2. 1
Part of the installation
Faxing installation space
bottom sweet style
installation has been adjusted
bottom is the whole style
depth and
(a) front view
top view
Figure 4.2. 1-1AL101 installation structure 1-bracket, 2-
a fried adapter 3, inner arm
4 -outer arm; 5-
balancer: 6-a vertical pipe.
front view
top view
Figure. 4,2. 1-2, AL1402 recommended warning structure diagram 1-bracket; 2-carbon adapter, 3-inner arm, 4-outer arm: 5-→balancer? 6-vertical pipe. TYKAoNiKAca
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.