This standard specifies the types and basic parameters of dryland disc harrows used with tractors. JB/T 6279.1-1992 Basic parameters of disc harrows JB/T6279.1-1992 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T6279.1-1992
Disc harrow
1992-06-10 Issued
Basic parameters
1993-07-01 Implementation
Issued by the Ministry of Machinery and Electronics Industry of the People's Republic of China
Mechanical Industry Standard of the People's Republic of China
Disc harrow
1 Subject content and scope of application
Basic parameters
This standard specifies the type and basic parameters of dryland disc targets matched with tractors. This standard applies to dryland disc targets matched with tractors. Reference Standards
GB8093
Concave Discs for Soil Cultivation Machinery
Product Numbering Rules for Agricultural Machinery
Product Models and Main Parameters of Disc Harrows
JB/T6279.1-1992
Product Models of Disc Harrows are composed of Category Code, Feature Code, Main Parameters and Modification Code according to NJ89. 1B
Modification Code
Basic Main Parameters/Modified Main Parameters
Feature CodebzxZ.net
Category Code
3.1 Category Code is composed of Classification Code and Group Code. The product category code of Disc Harrows is 1B. 1 Classification Code, indicating tillage and land preparation machinery. B Group Code, is the first letter of the Chinese Pinyin of "harrow" in the basic name of Disc Harrows. 3.2 The characteristic code is represented by the Chinese phonetic letters of the main characteristics of the disc harrow product. The first letter is the type code;
Q is light; J is medium; Z is heavy.
The second letter represents the code for the connection type of the disc harrow and the tractor: X is suspended; B is half suspended; the traction type is not represented by letters. The third letter represents the code for the harrow group configuration. D is a one-mounted type; the offset type is not represented by letters. 3.3 The main parameter refers to the working width of the disc harrow, in meters, with one decimal place. The main parameters are divided into basic main parameters and modified main parameters, separated by "". If there is no modification, "". 3.4 The modification code is indicated by adding "A" after the basic type. If there are several modifications, the sequence number is added in sequence starting from 2 after the letter A. 3.5 Marking example
Basic type working width is 1.5m (16 pieces), modified working width is 1.7m (one set of additional target pieces is added to each of the front and rear rows, becoming 18 pieces) suspended offset two-row two-group light disc harrow: 1BQX-1.5/1.716/18 pieces suspended offset light disc harrow. Approved by the Ministry of Machinery and Electronics Industry on June 10, 1992 and implemented on July 1, 1993
Basic parameters of disc harrow
JB/T6279.1-1992
The basic parameters of disc harrows shall comply with the provisions of Table 1. Table 1
Weight of single-chip computer kg
Designed paddle depth mm
Handle group configuration
Raking group deflection range
Paddle blade spacing mm
Square shaft size
Transport clearance
Suspended paddle, semi-suspended paddle
Traction paddle
Offset; opposite
7°~23°
170(169), 200
28×28, 32×32
Note: ① The dimensions in brackets are not used when designing new products. ② The transportation clearance of the disc handle of small tractors below 18W is not subject to this restriction. Basic parameters of disc paddle blades
The basic parameters of disc harrow blades should comply with the provisions of GB8093 and Table 2. Table 2
Diameter tolerance
Radius of curvature
Square hole size
500 (510)
600 (660)
29×29
33×33
Note: The dimensions in brackets are not used in the design of new products. Additional instructions:
550 (560)
11°~23°
200, 230
32×32
≥150
600(610)
600(750)
33×33
This standard is proposed and managed by the Chinese Academy of Agricultural Mechanization Sciences. Heavy
14°~26°
230（220），280，300
32×32，40×40
650(660)
700(600，750,910)
33×33
This standard was drafted by the Chinese Academy of Agricultural Mechanization Sciences, Jiayu Machinery and Harrow Factory and Yixuan Machinery Factory. The main drafters of this standard are Mu Weifeng, Cai Mingxing and Huang Dekun. From the date of implementation of this standard, NJ163-78 "Basic Parameters of Round Cake" will be invalid. 2
41×41
People's Republic of China
Mechanical Industry Standard
Basic parameters of disc harrow
JB/T 6279.11992
Published and issued by the China Academy of Mechanical Science
Printed by the China Academy of Mechanical Science
(No. 2 Shouti South Road, Beijing
Format 880×1230
Postal Code 100044)
Sheet 3/8
Word count 4,000
First edition in June 1993
First printing in June 1993
Price 1.20 yuan
Print run 1-500
Mechanical Industry Standard Service Network: http://www.JB.ac.cn661_169 /
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.