GB 19359.3-2003 Safety specification for inspection and use of dangerous goods packaging for railway transportation
Some standard content:
ICS13.300
National Standard of the People's Republic of China
GB19359.3--2003
Safety code for the inspection of packaging of dangerous goods for railway transportation
Snfety code for the inspection of packaging of dangerous goods for railway transportationcd by rail—IJseappraisal2003-11-05Promulgated
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Implementation on 2004-06-01
Chapter 4, Chapter 6 and Chapter 7 of this standard are mandatory provisions, and the rest are derivable provisions. GH19359.3—2003
Safety code for the inspection of packaging of dangerous goods for railway transportation is divided into 3 parts, and the first part is the? This part, its section 9.1-2007 Inspection and Quarantine Standard for Packaging of Dangerous Goods for Transport by Rail, and (1035S.2-2003 Safety Specification for Packaging of Dangerous Goods for Railway Transport) are used in two distribution plans. This standard is not equivalent to the United Nations Recommendations on the Inspection and Quarantine of the Transport of Dangerous Goods by Rail (12th edition; International Railway Dangerous Goods Rules for the Conformity Inspection of 3rd Edition). The relevant technical contents are in accordance with the above-mentioned standard. If no version is found, the standard is completely consistent. In terms of the standard format, the material is modified according to GB/F1.1-2000. The excerpts and appendices of this part are as follows: Selective thanks for the inclusion. This part is proposed and assigned by the Technical Committee on Dangerous Chemicals Management of the State Administration of Standardization (SAC 511): This part is drafted by: Anhui Provincial Exit and Exit Inspection and Quarantine Bureau: This part is drafted by: Shandong Exit and Exit Inspection and Quarantine Bureau, Jiangsu Exit and Exit Inspection and Quarantine Bureau, Da Chong Exit and Exit Inspection and Quarantine Bureau, Bijingshan Exit and Exit Inspection and Quarantine Bureau, Jiangxi Exit and Exit Inspection and Quarantine Bureau, etc. The drafters of this part are: Wen Jinsong, Zhang Shaoyan, Zi Tuojun, Wang Li, Tang Shuri, Ka Xuedong, Zhang Ru, Li Jiang. This part is prepared for the second time,
1 Fan Guo
GB 19359.3—2003
Safety Specifications for Inspection and Identification of Packages for Dangerous Goods Transported by Railways This standard specifies the requirements, sampling, determination and identification rules for the inspection and identification of packages for dangerous goods transported by railways. This standard is applicable to all packages for dangerous goods transported by railways except for Class 2, Class 6, Item 2 and Class 7 in the classification of dangerous goods.
This standard does not apply to packages with a net pressure of more than 400 psi and containers with a volume exceeding 400 psi. 2 Normative References
Many clauses in the following documents have become clauses of this standard through reference in technical specifications. For all dated referenced documents, all subsequent amendments (excluding errors) are hereby incorporated by reference. ) or revised versions are not applicable to this standard. The parties to the agreement or conclusion of this standard shall determine whether the latest versions of these documents may be discontinued. For any documents that are not published in due course, their new versions shall apply to this standard. GB/T282A-19%7 Batch inspection, counting sampling procedures and sampling procedures (applicable to continuous inspection) (: 9339.12003 General rules for safety inspection of dangerous goods for railway transportation GE-935J.3-20C% Titanium Safety inspection of dangerous goods for railway transportation Performance test 3 Wood Yan and definitions
319359.12693 The terminology and definitions established in 4 Requirements
4.1 General requirements
4.1.1 Appearance requirements for packages
4.1.1.1 The stamped, printed or printed marks, signs and labels on the packages shall be accurate, clear and firm and shall comply with the requirements of GB1S359.1-2033.
4.1.2 The packaging of the packages shall be disinfected and no residue, dirt or seepage shall be allowed. 4.1.2 The packaging selected by the unit shall be compatible with the properties of the dangerous goods and its performance shall comply with the provisions of 6B15, 1-2UG19359, 2103.
4.1.3 The packaging category of the package shall be equal to or higher than the packaging category required for the sensitive materials. 2.1.4 In the case of the following, the printed blank is for classification and grading of dangerous goods. Inspection report (Except for the technical instructions of the first production, see the report example:
) From the first transportation or outgoing:
When necessary (such as if the actual contents are not equal to the contents reported), the plastic packaging containers or containers used for drinking water, except for the coated containers, must provide a report of more than six months of chemical penetration test that meets the requirements of the emperor. 4.1.5
1 Report sample without Appendix B
4.1.6 The net volume of a single piece of dangerous goods received at the international dangerous goods inspection point shall not be reduced. 4.1.7 The volume of the container to be loaded at the port of the dangerous goods inspection shall be less than 98% of the total volume of the container. The shape coefficient of the container is relatively large. The expansion coefficient of the container shall be determined by the volume of the container. The packaging rate of the dangerous goods to be inspected shall be less than 95% of the packaging volume. 4.1.8 When using a wave or inert gas to protect dangerous goods, the wave or inert gas position should be able to effectively ensure the safety of the dangerous goods. 4.1.9 Dangerous goods must not move between the outer surface and the inner and outer packaging. 4.1.10 The surface with which the dangerous goods come into contact must not produce any chemical reaction that would affect the strength of the packaging and cause dangerous goods to leak out of the outer packaging. GB19359.3—2003
4.1.1. The material must not react chemically with the dangerous goods contained in it, and ensure that the inner packaging can be completely smooth when it breaks, so as not to cause the inner packaging to leak out of the outer packaging. 4.1.12 Anti-vibration and lining materials must not react chemically with the dangerous goods contained in it, thereby reducing its protective function: there should be sufficient cushioning and filling materials to prevent the inner packaging from moving.
4.2 Special requirements
4.2.1, single type packaging requirements
4.1.1 Close [1 push, wrong large, small pair of closure screws should be equipped with appropriate patient old reward. Standard blue treatment process supply to achieve the tight station 4.2.1.2 parallel barrel, ladder virtual with appropriate Dong seal. No matter what form of sealing is used, the bottom of the chlorine output, the sealing requirements. The hand hoop also needs to use calcium energy board.
4.2.2 Requirements for box packaging
42.2.1 This box, fiber should be firmly fixed when nailing, no protruding nails should be allowed, the sharp edges of the packaging must be turned upside down, and sealed to prevent any chemical reaction or physical change with the inner surface. Packing tape is used to tighten the box body, 4.2.2.2 The slow energy box should be intact, the joints should be flat and firm, and the packing tape is used to tighten the box body. 4.2.3 Requirements for packaging
4.2.3.1 When the outer container is sealed with H warp, the outer opening without inner packaging should be more than 30mm thick, and the thread should be more than 30mm thick. The thread should be cut and the end should be more than 30mm thick. The thread should be cut and the thread should be cut and the end should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. The thread should be cut and the thread should be cut. 4.2.4 Requirements for combined packaging
4.7, 4.1 When the inner container contains the body, the two must meet the requirements of melting seal: if airtight seal is required, the airtight seal must meet the requirements of both. 4.2.4.2 When containing liquid-resistant devices (such as glass), the outer packaging should meet the requirements of 4.1.1. of this standard: 4.2.4.3 The absorbent material must meet the requirements of 4.1.1. of this standard. 4.2.4.4 If the outer packaging of the box is not waterproof or waterproof, the inner container or inner container must be waterproof. 5 Sampling
5.1 These batches
are made of the same raw materials and the same process. The quantity is 1 piece. 5.2 Sampling rules
According to GB/2838-198? Stop routine control inspection-capital plus charge · general inspection water 2II Xie draw 5.3 sampling quantity
sampling efficiency see clothes! .
Table 1 Sampling efficiency
Batch blue electric company
9 --15
- aC:
Drawing swing excitement
* position for sex
6 monitoring
World Scenery Tour Field
s1--15f
:5:--+80
501~1200
1201--33c9
32311969
Table 1 (Hong)
Resistance effect
6.1 Check that the packaging layer of dangerous goods for road transport also meets the requirements of 4.1.2, 4.1.3 and 4.1.9, GB19359.3-2003
The unit is 4
6.2 According to 1319359.1-2003 and G30359.3-2C03. Check whether the selected packaging is suitable for the nature of dangerous goods transported by railways; whether the packaging grade is equal to or higher than the classification of the finished goods; whether there is a qualified report of the complete inspection. 6.3 For the dangerous goods transported by railways mentioned in 4.1.4.4.1., check whether there is a corresponding classification and hazardousness inspection report issued by the national inspection department or the inspection agency recognized by the national inspection department. 4. Check whether the net weight of the goods transported by railways meets the requirements of 4.1.6; 6.5 Check whether the packaging of dangerous goods transported by railways that contain pathogens or plasmodia meets the requirements of 4.1.7. 6.6 Extract the liquid protecting the dangerous goods and test the content of the protective gas with a trace gas analyzer; check whether the protective concentrated or sterilizing gas meets the requirements of 4.1.8 according to the corresponding standards of each type of dangerous goods. 6.7 Check the packaging materials, accessories, protective and prohibited materials, ropes and other additional packaging materials to ensure that they do not react chemically with the packaging materials, which may affect their performance.
6.8 Check whether the sealing is in accordance with the provisions of GB19359.1-2003. 6.9 Check whether the sealing size of the packaging is in accordance with the requirements of 4.2.3. 6.10 Check whether the packaging of the box is in accordance with the requirements of 4.2.2. 6.11 Check whether the inner packaging of the combination packaging is in accordance with the provisions of GB19359.1-2003. Whether the outer packaging of the fragile packaging is Class I. Whether the adsorbent material is in accordance with the provisions of 4.1.11. 6.12 Check whether the packaging of the raw and raw materials is in accordance with the requirements of 4.2.1. 7 Identification rules
7.1 The enterprise using dangerous goods packaging shall ensure that the dangerous goods packaging used for transportation complies with the provisions of this standard and shall be confirmed by the relevant departments. The enterprise using dangerous goods shall have the right to conduct acceptance inspection on the dangerous goods packaging received in accordance with the provisions of this standard: 7.2 The packaging of dangerous goods for transportation shall be determined in batches, with the order as one batch, but the batch shall not exceed the total quantity specified in the standard. 7.3 The validity period of the identification report shall be calculated from the date of loading of the dangerous goods. The validity period of the identification report for the packaging of Class Y dangerous substances and hazardous substances with side effects shall not exceed 6 months, and the validity period of the identification report for other dangerous goods shall not exceed 1 month, but this validity period shall not exceed the validity period of the inspection report. 7.4 Judgment rules: If any one of the items is unqualified, the dangerous goods packaging for transportation shall be disqualified. After the above items are qualified, the hazardous characteristics of the products are put into use (see the list).
7.5 Large qualified batch processing: After rework or removal of qualified parts, the number of parts is submitted again, and the strictness remains unchanged. 7.6 For other parts that are not qualified, it is not allowed to submit titanium road transport. Unless the sequence is qualified. GD19359.3-2C03
Appendix A
(Ditch material appendix)
Classification, classification and classification of hazardous characteristics inspection report example A, 1 Classification. Classification and classification of hazardous characteristics inspection report format see Table A.1 Table A.1 Classification, classification and classification of hazardous characteristics inspection report example X text × text X (qualification inspection agency customer name)
Classification, grading of dangerous goods test report
Date:
Research/development,
Test scope: dangerous goods classification, grading of effective characteristics, basic chemical properties, age identification
Explosiveness test and identification
Three, gas-based test and identification
Student:
Quantity of mixed products:
Four, flammable liquid test and identification
Vibration resistance test and identification
Six, oxidizing test and identification
Toxic test and identification
Eight, other dangerous characteristics
Capsule A. 1 (United Nations)
GH19359.3—2003
GB 13359.3—2003
X. Conclusion
1. Formal weight of cargo
2. National code:
3. Dangerous goods category:
4. Travel category:
5. Packing sequence:
6. Do not use portable cargo, public, standard method
8. Standard:
S,CAS ODE,
>,ICSt.COTE
11. Packaging mark:
12. Transportation responsibility:
11 Management:
Table 4.1 "Continuation"
14, Construction and modification of the equipment to conduct a narrow test purchase of the room, according to our quality:bzxZ.net
Export period:
Regulations: 1. No real room benefit, report person voucher, 2. This report is effective first
3. This report is valid from
City School:
.
Appendix B
(Informative Appendix)
Example of chemical compatibility test report
Chemical compatibility The format of the test report is shown in the table. Table B.1 Chemical compatibility test report format Chemical compatibility test Inappropriate Package name Year of manufacture Package name and room number Name of dangerous goods Relative degree of dangerous goods Classification of dangerous goods Description of dangerous goods characteristics Date of change Person in charge: Person in charge of: Code number: Product efficacy G1 19359,3—20C3 (stamp) GD 19359.3—2003
C.1 The format of the use adjustment report is as follows (1.
“Information Appendix
Use identification report shows
Use identification report format
Inspection machine name)
Dangerous goods transport facilities packaging container use adjustment report applicant
User
Packaging product name and certification station
Consumer 5 packaging category
Container energy
Late sales price number
Dangerous goods name
Dangerous goods status||tt| |Number of packages
Date of transfer of insured goods
Basis for inspection
Duration of total cloud order
External supply belt
(Mei Yi)
Single piece quantity
Comprehensive number:
Packing container:
Class of dangerous goods
Limited return number
Relative construction degree of six-order transmission
Single piece surface
Single mixing string
Chuan period:
Recovery person
Quick use benefit
New miscellaneous quantity
Technical sales person3. The validity period of the appraisal report shall be calculated from the date of loading of the dangerous goods. The validity period of the appraisal report for packages containing Class Y dangerous substances and hazardous substances with toxic and hazardous substances shall not exceed 6 months, and the validity period of the appraisal report for other dangerous goods shall not exceed 1 month, but this validity period cannot exceed the validity period of the inspection report. 7.4. If one item is unqualified, the packaging of the dangerous goods will be disqualified for transportation. After the above items are qualified, the hazardous characteristics of the products are put into use (see the list).
7.5 Large qualified batch processing: After rework or removal of qualified parts, the number of parts is submitted again, and the strictness remains unchanged. 7.6 For other parts that are not qualified, it is not allowed to submit titanium road transport. Unless the sequence is qualified. GD19359.3-2C03
Appendix A
(Ditch material appendix)
Classification, classification and classification of hazardous characteristics inspection report example A, 1 Classification. Classification and classification of hazardous characteristics inspection report format see Table A.1 Table A.1 Classification, classification and classification of hazardous characteristics inspection report example X text × text X (qualification inspection agency customer name)
Classification, grading of dangerous goods test report
Date:
Research/development,
Test scope: dangerous goods classification, grading of effective characteristics, basic chemical properties, age identification
Explosiveness test and identification
Three, gas-based test and identification
Student:
Quantity of mixed products:
Four, flammable liquid test and identification
Vibration resistance test and identification
Six, oxidizing test and identification
Toxic test and identification
Eight, other dangerous characteristics
Capsule A. 1 (United Nations)
GH19359.3—2003
GB 13359.3—2003
X. Conclusion
1. Formal weight of cargo
2. National code:
3. Dangerous goods category:
4. Travel category:
5. Packing sequence:
6. Do not use portable cargo, public, standard method
8. Standard:
S,CAS ODE,
>,ICSt.COTE
11. Packaging mark:
12. Transportation responsibility:
11 Management:
Table 4.1 "Continuation"
14, Construction and modification of the equipment to conduct a narrow test purchase of the room, according to our quality:
Export period:
Regulations: 1. No real room benefit, report person voucher, 2. This report is effective first
3. This report is valid from
City School:
.
Appendix B
(Informative Appendix)
Example of chemical compatibility test report
Chemical compatibility The format of the test report is shown in the table. Table B.1 Chemical compatibility test report format Chemical compatibility test Inappropriate Package name Year of manufacture Package name and room number Name of dangerous goods Relative degree of dangerous goods Classification of dangerous goods Description of dangerous goods characteristics Date of change Person in charge: Person in charge of: Code number: Product efficacy G1 19359,3—20C3 (stamp) GD 19359.3—2003
C.1 The format of the use adjustment report is as follows (1.
“Information Appendix
Use identification report shows
Use identification report format
Inspection machine name)
Dangerous goods transport facilities packaging container use adjustment report applicant
User
Packaging product name and certification station
Consumer 5 packaging category
Container energy
Late sales price number
Dangerous goods name
Dangerous goods status||tt| |Number of packages
Date of transfer of insured goods
Basis for inspection
Duration of total cloud order
External supply belt
(Mei Yi)
Single piece quantity
Comprehensive number:
Packing container:
Class of dangerous goods
Limited return number
Relative construction degree of six-order transmission
Single piece surface
Single mixing string
Chuan period:
Recovery person
Quick use benefit
New miscellaneous quantity
Technical sales person3. The validity period of the appraisal report shall be calculated from the date of loading of the dangerous goods. The validity period of the appraisal report for packages containing Class Y dangerous substances and hazardous substances with toxic and hazardous substances shall not exceed 6 months, and the validity period of the appraisal report for other dangerous goods shall not exceed 1 month, but this validity period cannot exceed the validity period of the inspection report. 7.4. If one item is unqualified, the packaging of the dangerous goods will be disqualified for transportation. After the above items are qualified, the hazardous characteristics of the products are put into use (see the list).
7.5 Large qualified batch processing: After rework or removal of qualified parts, the number of parts is submitted again, and the strictness remains unchanged. 7.6 For other parts that are not qualified, it is not allowed to submit titanium road transport. Unless the sequence is qualified. GD19359.3-2C03
Appendix A
(Ditch material appendix)
Classification, classification and classification of hazardous characteristics inspection report example A, 1 Classification. Classification and classification of hazardous characteristics inspection report format see Table A.1 Table A.1 Classification, classification and classification of hazardous characteristics inspection report example X text × text X (qualification inspection agency customer name)
Classification, grading of dangerous goods test report
Date:
Research/development,
Test scope: dangerous goods classification, grading of effective characteristics, basic chemical properties, age identification
Explosiveness test and identification
Three, gas-based test and identification
Student:
Quantity of mixed products:
Four, flammable liquid test and identification
Vibration resistance test and identification
Six, oxidizing test and identification
Toxic test and identification
Eight, other dangerous characteristics
Capsule A. 1 (United Nations)
GH19359.3—2003
GB 13359.3—2003
X. Conclusion
1. Formal weight of cargo
2. National code:
3. Dangerous goods category:
4. Travel category:
5. Packing sequence:
6. Do not use portable cargo, public, standard method
8. Standard:
S,CAS ODE,
>,ICSt.COTE
11. Packaging mark:
12. Transportation responsibility:
11 Management:
Table 4.1 "Continuation"
14, Construction and modification of the equipment to conduct a narrow test purchase of the room, according to our quality:
Export period:
Regulations: 1. No real room benefit, report person voucher, 2. This report is effective first
3. This report is valid from
City School:
.
Appendix B
(Informative Appendix)
Example of chemical compatibility test report
Chemical compatibility The format of the test report is shown in the table. Table B.1 Chemical compatibility test report format Chemical compatibility test Inappropriate Package name Year of manufacture Package name and room number Name of dangerous goods Relative degree of dangerous goods Classification of dangerous goods Description of dangerous goods characteristics Date of change Person in charge: Person in charge of: Code number: Product efficacy G1 19359,3—20C3 (stamp) GD 19359.3—2003
C.1 The format of the use adjustment report is as follows (1.
“Information Appendix
Use identification report shows
Use identification report format
Inspection machine name)
Dangerous goods transport facilities packaging container use adjustment report applicant
User
Packaging product name and certification station
Consumer 5 packaging category
Container energy
Late sales price number
Dangerous goods name
Dangerous goods status||tt| |Number of packages
Date of transfer of insured goods
Basis for inspection
Duration of total cloud order
External supply belt
(Mei Yi)
Single piece quantity
Comprehensive number:
Packing container:
Class of dangerous goods
Limited return number
Relative construction degree of six-order transmission
Single piece surface
Single mixing string
Chuan period:
Recovery person
Quick use benefit
New miscellaneous quantity
Technical sales person
"Appendix to the information
Use of identification report
Use of identification report format
Inspection machine name)
Danger goods transport packaging container use adjustment report applicant
User
Name of packaging container and certification station
Packing category
Container energy
Sale price number
Name of dangerous goods
Dangerous goods status
Accused package quantity
Insured goods Transfer date
Inspection basis
Cloud sticker total order has a body period
External pull supply belt rail
(Mei Yi)
Single piece total
General number:
Packing container:
Dangerous goods category
Limited return male
Six-order transmission relative construction degree
Single piece hand surface
Single mixing string currency
Sichuan period:
Restore salesperson
Quick use benefit
New miscellaneous quantity
Technical salesperson
"Appendix to the information
Use of identification report
Use of identification report format
Inspection machine name)
Danger goods transport packaging container use adjustment report applicant
User
Name of packaging container and certification station
Packing category
Container energy
Sale price number
Name of dangerous goods
Dangerous goods status
Accused package quantity
Insured goods Transfer date
Inspection basis
Cloud sticker total order has a body period
External pull supply belt rail
(Mei Yi)
Single piece total
General number:
Packing container:
Dangerous goods category
Limited return male
Six-order transmission relative construction degree
Single piece hand surface
Single mixing string currency
Sichuan period:
Restore salesperson
Quick use benefit
New miscellaneous quantity
Technical salesperson
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.