Some standard content:
B/119251-2303
This standard is the EA·J General Standard (2002) jointly developed by the International Article Numbering Association (F4N) and the American Uniform Code Council (ICC). Section 1: Numbering and Symbolizing of Trade Items (Numbering and Single Marking of Trade Items). The coding and symbols of trade items specified by the International Article Numbering Association (F4N) are constantly evolving and changing. 1 is only for the identification of goods: that is, EAN: LPC barcode (GH12201), limited to the identification of trade items scanned by the PCIS system, with section With the application of a little depth, the label of the transport unit (B/T1663C) and the label of the property of the disk (B/T16953) appeared. The FA1-128 barcode (B/T1663C-525) which is suitable for expressing these abbreviations has gradually become a relatively complete system of abbreviations and symbols for trade items. The LC Tongzhou standard (2U02 version) has been modified many times. Its second section and the first section comprehensively summarize the basic principles and methods for encoding trade items. It has a good guiding significance for the user to test and operate the "trade point" standard. This standard is based on the provisions of GH/T1.1203) After re-screening, the technical content of this standard is kept in its entirety, and the content of this standard also pays attention to the connection with the relevant national standards that have been formulated. The standard can be combined with other standards to formulate more suitable solutions as needed.
This standard is a state-owned appendix.
This standard is proposed and sponsored by China Commodity Code Center. Drafting unit of this standard: China Commodity Code Center: Main contributors to this standard: Guo Weihua, Li Jianhui, Huang Zeshang, Kong Hongdang 1 Scope
Guidelines for the coding and symbol representation of trade items. This standard specifies the basic requirements for the coding and symbol representation of trade items. This standard applies to the identification of original product items and their extensions. , 2 Normative references
GB/T19251—2003
1 The clauses in the following documents become the clauses of this standard through reference in this standard. For the documents with the same reference date, all subsequent amendments (not including errors) or revisions shall not be retroactively applied to this standard. However, the parties who have reached an agreement on this standard shall apply the latest versions of these documents. For the documents with no date referenced, their latest versions shall apply to this standard. GB2S—2000 Products (SQ/IF:154D80c, Iforanutiuntechnology—Automideatificn:rm barcodes-Ba codc aybology specif:eation-FAN/LPC,NEQ)GB/T1255 barcode terminology
CB/T125C6 TCM barcode number
CB/T1E425EAN·LLC system 123
G3/T16827+ return standard serial number (15SV part) barcode GB/116830 storage unit code
G/T1985—2mgEAV·UCC system seat identification, etc. (ISO/TE541S9,IniormationlechneleHy--FAN/LrCC npplieazion iden:fiera aud Enct datn identiziers ard naintenance,NEQ)GB/T_5 In-store code
3 Terms and definitions
GH12905 established and the following terms and definitions apply to this standard. 3.1
Trade item, tradeitem
Any product or service that can have advanced definition characteristics from raw materials to end users, for which there is a need to obtain advanced definition information in the supply chain process, and can be priced, ordered or invoiced at a higher level. 3.2
Global Trade Item Identification Code Clabal Trade Number (GTiN) is a standard identification code for trade items (3.1) worldwide: its structure is 14 digits: 3.3
Quantitative Trade Item Fixed quantity Trade item (3.1) produced and sold according to the same specifications and components (size, quantity, quality, design, etc.), usually priced according to the number of pieces
Variable Trade Item
variable item A trade item (3.1) that varies in quality, size, number of items contained or volume. It is usually priced according to the unit of measurement and sold according to the random number.
GB/I19251-2J03
4 Structure and coding principle
4. 1GILIN structure
EAN:LC6,LCC-I2,EANLCC-13 and EANLICC-14 certification codes are used for item A. When the whole identifier is stored in 1 format (14 digits), it can be regarded as a Global Trade Item Number (GTC). See Table 1 for different number structures represented in GTC format
EAN/UCC-14
FAN:UCC 13
Uck-12
FANITX-N
4.2 GTIN Coding Principles
4.2.1 Uniqueness
If the original piece is different from other trade items, a single, unique TIN shall be assigned. 4.2.2 Non-inclusive
Do not assign a GIN to the piece according to any information related to the trade item: V manufacturers should send all related information to other partners through electronic data exchange (into a card format). 4.2.3. The trade items have small changes, so the two INs cannot be changed: the trade items have been ordered and the invoices are stored and counted. Unless the regulations require changes, please pay attention to T.5 Identification of trade items
5.1 Quantitative trade items
5. 1. 1 General principles
For items produced according to the same specifications and or categories (such as category, small, quality order, domestic, liter, etc.), the item identification code identifies the corresponding wide item. If an item is different from other trade items, a separate, unique EN code shall be assigned (--11030039050.-103~3930~969977--97S+ all GTINs selected in this article).
Table 2 gives the GTIN code for quantitative trade items. Table 2 shows the data structure of the terminal code and the number of quantitative trade items according to the different choices of symbols
EAN:UCC-E
ucc-1?
EAN/UGC:.
EANLX:4
KAN/tOC-...
EN/LOC-.4
Code symbol
ITF-14
TT--14
.HC:FAN-I2RIAI I:
JCC/EAN-128(A1J1)
JCC/:AR-12A(AI 01)
Polyester material number Xikao standard
CH1234
GB/T1683c
iR/T 16x36
R/TLBA31
GE/T1512
G/T 15425
GB:T[5J26
Han Dao Xiao
Apply to ten small black months
Activity, T all Le Keke
Violate all exchange items
A Daochuan Xiao
Apply to ten FCS
Apply to TS
Apply to OS
Not also used for PS
5.1.2 Trade items sold through S scanning GB/T19251—2003
Trade products sold through PS scanning should be identified with the EA/LP code. In addition, this trade item only supports FAN/IC-HICC12 and FAN/ITC:R marking codes. Books and publications are also considered as a number of physical products to be marked with EAN/CCL-5 standard only on behalf of the original purchase of G23-200 penalty 10.2. - Good use of GB12SC42003 Section C..2. Method: If the Chinese standard book number is not marked, see G12u, if the Chinese standard number is marked, see GB:T 16827.
5.1.3 Combination of trade items not scanned by P05 5.1.3.1 General principles
Each trade date, if different from the other trade dates in some way, shall be assigned a separate TN. This applies to trade dates, but it may also be a separate trade item. 5.1.3.2 Combination of the same trade item
A combination of the same trade item is a standard stable combination of a series of identical units. These identical units are marked with F4 IC:3, UCX:12, EAN/:3 or EAV/LCC-14 marking codes. If the combination package itself is a product, it is marked with LCC-2, EAN/LCC1 or FAN/UKC14 marking codes. 5.1.3.3 Combination of different trade items
A combination of different trade items is a standard stable combination of a series of different units. These different units are marked with the same GTIN. If the combination package itself is a trade item, it is marked with UCL-2 or EAN/ICC-1? marking code.
The combination package is marked with a unique GTIN, such as HNA-&, LCX-1?. Or EAN-13, after heat treatment for packaging, the AN/UCC-14 label is used to represent the whole package of multiple labels: 5.1.3.4 Symbols of combined trade item certification codes E The UCC-12EAN/UC.13 identification code is used to represent the AN/L.HC system measurement symbol (UPC A.UICE and V code symbols are used to represent the same sign,
Liu Gan prints weak cases and has a low requirement for the symbol page quantity of the combined negative item F. Its IICC\, FAN/ ICC-13EAN/4 standard codes are represented by JTF14 symbols: If the conditions permit, the UCC/EAN-128 of the 01 can be used to represent the required date: L:12TAN/TCC-I: or EAV/ITCC1 identification code. If the identification code is too complicated, the UCC/EAN128 symbol is selected.
5.1.4 Identification of items composed of multiple components is not suitable for those that do not pass the 108 scanning process. To identify the characteristic element in multiple units, the trade item should be marked with the application identification symbol (see 300/1598) in reverse order. Each separate unit should be marked with the UCC/EA_8 bar code, which includes the trade item serial number and the number of pieces of the trade item. If a property is represented on multiple parts, the screen coordinates of the property value should be used. (86) The single unit cannot be marked with the same symbol at the same time on the same element. Unit data string of the company (C).
5.2 Variable sales items that are not scanned by P05 5.2.1 Principle of integrity
The rules listed in this article are only applicable to the sales items with continuously changing quantities, order materials or production books, and are planned in a single way and in advance as specified in the quarterly incentive: the nominal calendar sales items are missing as fixed items. For examples of the annual and monthly changes in the sales items, please refer to Appendix A. For different options for coding and symbol indication of the empty quantity trade items, please refer to Table 3: FA/T 1925t—2003
Microdata Station
AN:1.C:.+
Table 3 Selection card for variable quality weak item storage code and symbol representation
:TF 14
UCCVEAN :28 AI(01)
5.2.2 Trade measurement of variable three goods demand itemswww.bzxz.net
Code pair guide file
GR:T :EB33
GL:T15:23
Not used
Three AN/U-11 identification codes are used to identify fixed attributes or characteristics of variable items. In order to determine the measurement of variable items, it is necessary to indicate the effective measurement of hydrogen. The use of low-volume measurement depends on the product's own development, which can be quantity, quality, and filter size.
For more information about the effective measurement of test data, please refer to (G/T16086, 5, 2.2.1 variable count A15 0
Liu Cai's trade item date, the end is the number of item dates included, then the unit number is completed, to generate a basic effect number, insert a leading even number in the "item date effect" section of the odd-numbered learning period to ask the instrument to pay the data, the unit data and the EA/:4 identification code link can be used to obtain the standard sales results, 5.2.2.2 product calculation = 431nn, 32mn), (35n)(36) If the variables of the trade item date are respectively quality, size, surface or description, these unit effect trees are used in the period. For only the accounted for,! You can use one unit of unit data to record the unit data back, when you can get a certain unit of measurement quickly in any unit of measurement, and when the unit of measurement is not used to distinguish between the purchase and invoicing. You can use the unit data of a specific package of trade payment on a specific month, for example: see the quantity in grams, meters.
5.2.2.3 Rolled products - rolls, length, center diameter, orientation, joints (AI80C1EAN/LCCI identification codes are used to indicate basic roll products, A100 contains pre-defined variable sections of roll products. It can be used for this standard configuration (A%nr, 32nr..a5nn.36nn> not enough to specify the variable roll product. This unit data should not be combined with other unit data representing standard product configurations. 5.3 Quantitative items for limited distribution
5.3.1 Principle
This code is used for quantitative trade mark in small closed-loop competition, and the distribution of the items with concentrated clock-type marks is limited to the company for limited use. These items can be used together with the four trade item identification codes (1V). For the classification of limited codes, the relevant national standards or the relevant regulations of the China Material Code Center should be strictly followed. When the company is used for internal use, the code structure represented by the unit of the wood strip or its management is responsible. The new version and the new use of the code must be notified to the market according to its own needs. 5.3.2 Internal company code
5.3.2.1 EAN/UCC-2 code with a leading 0 or 2 The FAN/TCC code is used to identify items within a company, such as the internal serial number of a company. When the EAN/UC-2 code is used, the unit data is called the "fast circulation code" because it makes the chain faster.
Design! In addition to the target identification, this unit number can be used by the equipment supplier of the company to meet the requirements of the company. Note: In the environment where the system uses 1 beat people. The FAN-X single symbol 4 represents the small EAN:UCC identification code (higher than the EAN/LC-2 code) can be slidable. If the music is limited in this way, the code in the scene is: KA .TCK.
5.3.2.2 HAN·UCC code with the prefix U4 Any company department can use this unit number as the company's internal product registration code. If you use it! If the prefix AN·C is 1, you can use the product code structure: 5.3.2.3 EAV·LCC code with the prefix 0D is A·1. It is used for internal company coding. When using A internal code, it is used as a representative of the company's internal code. The UPL-E barcode is displayed as "Company prefix \06000.200i000 All 3007999 Party uses this structure. Please see 1S4 for internal fees,
5.3.3 The regional abbreviation code specified by the coding organization - EAV·LLC code E4N·UC 23.29 with a level of 20~29 is used as a limited area or internal identification. Each comprehensive group has the right to use these codes in the same country or specified area. They can be managed by EAV member organizations or individuals in the user or designated area. They can also be used by law companies for internal coding of quantitative real-time trade projects in the country or specified area of EAN member organizations or IIC. Under the single market of EAN product members, RAN·UCC 036 can also be used for state quantitative trade source identification, and can be used in the use of quantitative regional city and other public markets. The original test of the return must refer to GB/T1263 and the relevant provisions of the national product center.
Note 2: In addition to the main project 1, the company manager can also transfer this data to other projects within the company. 5.2 Variable capital transaction projects with limited distribution
5.4.1 original bottle
The variable quantity mentioned in this article refers to the number of units sold by the flag. There are four prices for each quantity. The daily number is inserted through 1 product (for example: apples sold at a fixed price per gram:: This constant item can be marked by the left store by the seller. It can also be marked by a quick book retrograde mark. In order to solve this problem, the company can discuss the solution of this report.
EAN member organizations and can design the variable profit item mark with a current rate of 02.0 and a rate of 29 to be used in the current and common areas. FAN members and L\CC determine the user company's finalized quantity code for the company's internal use ,
Move before the relevant EA·UCC (HEAN or member organization downloads the data segment specified by the ICC for the area city>after it. It can be used as a whole customer structure preparation method system to show the strict product type, line five, calculate the price list number. The business book can be weighed automatically, through the unit price! Calculate the price and transfer the information to the bar code, etc., so that it is called according to the adopted missing structure, and the careful amount is used as the instruction for decoding the effective data. Now the scanning equipment is programmed: 5.4. The standard error of the variable trade item
The AV member organization should allocate one or more AV+CC levels 02, 2G to 24, for variables to 6.1.1 Classification of the two properties of trade items
The two properties of trade items can be divided into two categories: variable, fixed and finite. 6.1.2 Symbolic representation of trade item properties
The properties of trade items shall be represented by UCA-28 barcodes. See /I15425
6.2 Variable properties of trade items
The details of the unit data rate described in the article are as follows: See GP/T: 59-2GG3, 6.2.1 Batch number (A10)
The batch number must be the date of the trade item. There is no special production feature. You can record it in any way to achieve trade flow: the date of the trade must include the date of the whole process. The date of the trade must include the date of the trade. 6.2.2 Date
indicates the unit validity period. The data are: production date (411), packaging date (A131), shelf life (A1=), expiration date (AI1/1 production date), and the unit data application must be used in the place where the industry requires the date information to distinguish the equivalent case GB/T 19251-2h03
6.2.3 Serial number 1A[21'
The serial number of the trading unit indicates the serial number of the trading unit, which is used to realize the limitation of the trading item through the specific serial number. Accurate limitation tracking must include the full account case product to be replaced by the current month, E.2.4 Secondary data for medical and health industry products (A122) This unit number filter string contains the supplementary data of the medical and health industry products. 6.2.5 Secondary serial number (41750
This unit number is used to limit the special components included in the trading item: once it is used in the market, the unit frequency data string A1 (2) must appear on the trading item 1. The secondary serial number can involve any component included in the trading item. It is a member of GTI.
For example, a "primary series" can be placed on a visual record to identify its serial number. A company using this number should notify all its business partners of the results of the trade contract related to the secondary series. 6.2.5 Source Entity Reference (A12513
The reference of a source entity is an attribute of the trade item date and is related to the original date of the trade item. The issuer of the trade item must also identify the entity with which the data is derived in a convenient way. 6.2.7 Variable Trade Item Logistics Measures (Al33an, 34aa, 35mn, 36nm) The logistics quantities of a variable trade item remain unchanged, therefore, they are fixed properties and should not be marked with a serial number. However, the logistics measures of variable trade items can reflect the changes in the size or quality of these items. The quantity of the inventory has changed. This unit is used in the data to represent the logistics measurement of a trade item with its original quantity. 6.2.5 kg/m2 (A1337)
In this unit data, the effective quantity per square meter can be used to distinguish the same trade items: it is a variable attribute of the trade item rather than a variable measurement of the trade item. Due to the relationship between production conditions, the standard of calculating the quantity per half square meter in the inventory list may be changed due to some changes in the actual quality. Although the global credit number code IN remains unchanged, it may be useful to mark the actual quality of the square meter on the trade item. 6.2.9 Origin of trade items: 41422) In the physical unit, this unit data string can be said to be based on the origin of the trade item. The mark of the trade item is represented by 4IC1 or A32. ,
6.2.10 The country (or region) of initial processing of the trade item (AI423) This unit data can be used for physical unit processing to indicate the country or region where the trade item is first processed!, The month identification of the wide item is indicated by AT or 1.
6.2.11 The country (or region) of processing of the trade item (A1424) This unit data is used for physical unit processing to indicate the country (or region) of processing on the date of payment. The flexible trade item is marked with a code or representation.
6.2.12 The country or region (41425) This unit data can be used for physical unit processing to indicate the country (or region) of processing on the date of payment. The identification code of the total item is A1AIC2.
6.2.13 The country (or region) of processing of the trade item (A1424) This unit data can be used for physical unit processing to indicate the country (or region) of processing on the date of payment. The whole process of processing is the national image (or region 1 (A[426)). This unit data string can be used as the physical unit main, so that the whole process of processing is carried out under the home (or place ×), the identification code of the fee item date is represented by A101 or A12,
6.2.14 The approval number of the operator (41703s) is effective here. This product should be marked with the approval number assigned by the national agency according to the requirements of the law. This year's data string can be used as the physical sheep worker to represent the national approval number of the Beijing Vocational and Technical College item month. The identification of the month is represented by GT. The output may require a number, and the mathematical table of six processors is limited in sequence. 6.3 The fixed attributes of the trade project
The unit data described in this article is the content of GB/16S66.3.1 Additional product identification assigned by the manufacturer (AI240) CB/T 19251—2003
Unit data is represented by a publicly available (non-FAN/ICC) data item identifier: it is marked with the same EA·L. identifier (AIU1) and the same item number in the FAN·X system: AI2 and I1 must have a corresponding relationship in the scheme.
6.3.2 Customer code (41241)
This unit data is used for the commercial use of the part number allocated by the customer to facilitate the conversion of the manufacturing unit or (6.4 Item V6.4.1 Serial number of consecutive products - two-digit additional symbol The two-digit additional symbol is used to provide supplementary identification of consecutive products to distinguish different issues of consecutive publications. It is not specially designed for FOS scanning. "TIN provides the necessary numbering for the identification of a specific product. The barcode symbol is used for serial publications. It requires an additional identifier beyond the item identification code. When the barcode is scanned, it is processed together with the GTIN. For details, see G3/T16827
6.1.2 Book Supplement - 2-digit and 5-digit plus symbols 2-digit and 5-digit plus symbols can identify different versions of the book. These barcodes are used to track the different versions of a book. The industry also contains the common information contained in the GIN. The detailed format is as follows. 5/112005.
6.4.3 Product Variant (4120)
Year - Each item must be assigned a unique (TV (Global Trade Item Information Code)). This is in EAN·L The application rules of the C system are very clear, but there are cases where, outside the manufacturing company, the product distinction is not very specific, so the product does not need a separate identification code. Unit number A2 is used to handle the trade item changes that do not have a specific meaning for the manufacturer. C/16986
6.4,4 Unit price (A[8055)
This unit data is used to distinguish the price changes of trade products and to indicate the price recorded in the unit on the single unit of the product. The price mark cannot be used. There is no need to scan all the groups of trade items. The same price change product needs a unique EAN, UCC system code. Detailed rules for the use of trade item identification codes
1.1 Although the principle of trade identification code is the same as that of the manufacturer, the manufacturer is responsible for allocating the G1N code. If a product is made for a specific customer and only that customer wants to order it, the customer is allowed to use the manufacturer's own identification code (the allocation of T1V (T1N) should comply with the principle of non-significance and qualitativeness. Generally, different IN codes are not required on the packaging, but if two products can be compatible, then the two products can use the same IN code. For example, a product marked in French on the packaging can use the same IN code as a product marked in French and German. In this case, the manufacturer If the product is different in the same country and the same IN, the product should be marked as different.
7.2 Introduction of two products
When a new product is introduced, a new IN should be introduced. This regulation is only applicable to products that are distributed or tested in different countries.
CB/T19251-2C03
7.3 The time required for re-using GIIN
is allocated to a certain product. After the product is re-supplied to the original product, it can be used again by other trade items. For service: the shortest time is two Years and a half, the type of goods need to be specified whether the time limit is longer, for example: the policy can enter the supply chain after many years of inventory: all brands should consider the period of existence of the trade item in the supply chain so that they can update the use of 6TIN. When considering the reuse of a trade partner, the recent statistical analysis or service of the original (IN) data may be used for a long time after the original trade item is submitted. 7.2 Data consistency || tt || When a new G is divided into two times longer than the previous trade item, the manufacturer, the time and cost of the supplier are often the same. The information provided by the TIV is important for enterprises. The pilot is to conduct strict information collection and read as early as possible before the actual sale of products: 7.5 Pre-priced goods
Pre-pricing is the most practical policy. The maintenance of the monthly file of the trading item in the entire supply chain becomes very complicated. Of course, if the price of the trading item is marked on the monthly price, when the price of the trading item on the monthly price changes, the GTIN should be updated. 7.6 Variants of trade items
To reduce the changes in II, when the actual trading page changes or changes, the GTIN of the contract item should be changed under the following circumstances
7.6. 1 Promotional variants
1 Multiple promotional variants that affect the size and/or quality of the product must be assigned a single, unique GTIN (e.g., a product with a price reduction or a discount). 21
Promotional variants of a product with a price reduction on the packaging must be assigned a separate, unique TIN, unless local regulations or price marking regulations dictate otherwise (e.g., a special package of candy made specifically for the same season).
1) Other promotional packages should not be assigned a separate, unique TIN (e.g., discount coupons, enclosed gifts, mail-in gifts, free gifts). 7.6.2 Product variations Product variations include any changes or improvements to a product during the product life cycle specified by the manufacturer. If a manufacturer decides to produce a variant of a standard product (e.g. a product with different ingredients) that exists simultaneously with the standard product, then a separate, unique code must be assigned to the product. New product variants may have minor changes or improvements that do not require a separate code (e.g. a product with different ingredients). When a product variant is replaced by an old product, such as a change in the product's quantity, size, packaging, product name or brand, a separate, unique code must be assigned to the product. 7.6.3 Variants of modular trade items
1) For standard trade items consisting of a series of units, when any of the units contained in the trade item changes, the GTIN of the trade item must be divided into two different TINs (TIN.2) For trade items containing other units, when these units become product variants of the trade item, the following principles should be observed: (1) If the trade item is to be effectively ordered, handled and tracked, a separate GTIN must be assigned to the trade item (e.g., promotion limited to a certain place, special period promotion, with different product instructions on the label) (2) If the product contains variants that are only relevant to the manufacturer, the manufacturer should distinguish these variants by identifying the product variant with the virtual identifier 2! For example: a slight change in packaging design, such as changing the box from side loading to top loading), A.1 Classification of variable product items Appendix A (Informative Appendix) Classification and coding examples of variable items Key points of changes 1 Table A1 Types of variable items Item description GB/T19251—2003 Classification of variable product items Small is difficult to consult or send light packaging, to order by any example number, for non-rotten trade, (for example: fruit model dishes, Batumi. Carpet, unfinished materials, refined products 4. The table is a trade entity involving a certain product and the form, is the size of the single name complete || tt || purchase and design. This product || tt || process and clean design example plus the whole belonging to the cow cow, color fragrance title, fire, Lai, small film, etc., forget the knowledge of the person who indicates a special reality pre-specified Entity, if necessary, packaging form, front or back point size, make the war single purpose must be effective identification, complete
product packaging and then the number of costs to go to the beginning of the number of labels. (Including hot, fish fillet, cold cut, sharing,?
No code clothing display board many water slow examples and increase the month packaging form and divided by the project type expansion or quality recovery single single single identification complete its vote can be standardized trade information items, 1AV.H: the most popular name with the new good Include all kinds of avoidance, examples: people, places, evil, etc.,
meaning less small optical machine defined basic level creation trade factory, use scale to make a single unit of standard area complete room effect chemical group package item
mark to represent the unmarked chemical need personnel naturally different entity, if necessary, specify the form of installation, all items after the total quality of the date to promote the trade product prediction purpose complete temporary
A.2 change = Austrian trade item self-coding example
4. 2. 1 Explanation
? Explanation Clearly, all examples use the same expression, i.e. price list, delivery, invoice and proof of validity document. In example: 1, the UCC/EAN-128 barcode symbol is used. The given small plan clearly shows the correct use of the given application identifier. When A1 is not used, the shipment must always be received by the specified method or other means before the physical payment is received: A.2.2 Piecework
Example 6: Invoice according to quality The product to be ordered and delivered on a piece-rate basis includes a 5g micro-salami. IH units are ordered and delivered with two pieces of glue. Each box is marked with SS and also has relevant information on the box, as follows:
4112 indicates the GTIN of the variable unit placed in the box; 41301 indicates the total quality of the box on the date of receipt: GB/I192512CC3
A? Three boxes can be placed on a pallet. The pallet can be marked with the S mark and the contents of the pallet can be indicated. The details are as follows:
AI02 GTIN of the quantity unit in the old pallet: A10 indicates the current total quantity in the pallet:
A137 indicates the effective quantity of the item in the pallet:
The invoice shows the V and actual quantity of the goods, and also shows the total quantity and the price of the next gram: The GTIN of the invoice is the same as the order Single kill GTV and its quantity clearly match, detailed mark first A, 2, validity period file! Record see A.3 and Table A, 4, Table 4.2 piecework trade demand example
supply area
a high person's profit when afraid of the amount of a 50gg
160
a physical energy medium
blood yuan 1-33 small entry profit decoction -167kR
benefit yuan 2-33 ~ summer people's profit yield = 16.9kg
early 3 = 34 ~ Considering the quantity of the collected pieces = 17. kg, the GTIN and total M picture of the different shapes are 55. And the price / kk / tt / | tt / | GTIN ATE12340CU13 / | tt / | 100X976 * x34565.51K / | tt / | 63 3761232: 36380 10608 / | tt / | single heart 1: / | tt / | G2 97h184nc01x 1G1 X:1S7 3 33 Unit 2:
05 6: 2:4:321:13
C3 μ71231aU0uJ8 31L1 JCo15y 37 33 Unit:
tsre129:5x310022
02 3751234 70000181010G017;1 1. Check 3G27e123:3onn1nn3
G29761233900181G1603331:
100076.254509c218,5c.7k price guarantee/kg times A.3 piece count reading example item width unit data complete item this unit effective pledge file
month effective evidence
make a certificate code a policy record
logistics unit mark H (SSC)
375:2345n0ar33n
37912345nnnnnon8
51234anonomt915
3351431500001.1922
Contains both the country's trade item
F*61225:xx18
97612N&5:X:C1A
PrG123-5G18
97 5123:3JCJcJ8
urgent driving quality explosion:
Table A.4 piecework trade example trade item according to the GTN
s12145onon
A.2.3 standard grouping quality trade
quality/K
this to explain the technology and the children's development fee, according to the standard of the item is the method of purchasing and delivering the product of the merchant on a daily basis - a smooth day, barbecue, head 2, year block year 2U0g The order for a box of goods is marked with GT1N when it is delivered, followed by the actual mass of the box. A box can be placed on a pallet, and the pallet can be marked with SC. The information of the items in the pallet can also be added to the pallet. Specifically, the following GT1N indicates the unit of the pallet: GT2 indicates the total mass of the items in the pallet: GT315 indicates the total mass of the items in the pallet. GA/T19751--7033 indicates the total mass and price per gram, and the quantity and quantity of the delivery are checked and matched with the order. See Table A.5 for detailed markings. See Table A.6 and Table A.7 for data records. Table 4.5 Standard grouping cumulative example
Symbols used for parameters
Suppliers record
1 20th fast barbecue, and weight = 2.3 ℃ 6 real package three buildings
) individual items
Unit 1 bottle weight =, 150kg
Unit 2. Weight -.070kg
Unit 3 Weight -3.380kk
If delivered in tray form
(12.2/g
GTIN 97G123+5X.:11?
3x676133+300017
Unit 1:01 9781234560:17 3:02 006415 unit 2019761234500: [7330200016 unit 3.01276.23150017313n036s tongue: c) 37612345300001009
27612730601110231220
x9761351o0ut-7/12.2hgx price/
Table A.6 Standard grouping example unit data document logistics data file
monthly file
—full record
1. 2. 4 Batch trade
Product unit identification
J76123450n0n010691
The total product quality/time
Standard grouping of the project
57612345000117
Total product quality/time
Standard grouping of the project
Trade project data file table A.7
Trade
976:234569018
This example shows the order year delivery of the batch trade project. The supplier's product catalog contains one item: the following batch of packaging materials sold in grams. The unit to tax quantity
Ting unit 0 is required to be delivered in boxes. Each box is marked with GTIN, and the actual quantity it contains can be stored in the tray. The tray can be used with SSC to display the total quantity and the price of one gram at the same time. The quality of the change can be verified by checking whether the card is the same as the quantity purchased. See Table A.8 for details. The data selection file records Table A.9 and Table A.10. Example of bulk trade: The supply of the following batch flow of gram-based vegetables is in the form of a package of 2 kg. If the quantity is changed to 6 kg, the order quantity is 7 kg. If the order is in the form of a tray, it is 6 kg. [and to 3. no price g
new single effect data/xiangchuan symbol name
(-1IN #7A :34509:34
13: *4 0751234560n04!
year/1,01 7612445G0n04: 311,G012year*:01 5261231(10: 41: G10.
search disk:00323455r9:1:13
31.3x price/380kk
delivered by toto
month (12.2/g
GTIN 97G123+5X.:11?
3x676133+300017
unit 1:01 9781234560:17 3:02 006415 unit 2019761234500: [7330200016 unit 3.01276.23150017313n036s tongue: c) 37612345300001009
27612730601110231220
x9761351o0ut-7/12.2hgx price/
Table A.6 Standard grouping example unit data document logistics data file
monthly file
—full record
1. 2. 4 Batch trade
Product unit identification
J76123450n0n010691
The total product quality/time
Standard grouping of the project
57612345000117
Total product quality/time
Standard grouping of the project
Trade project data file table A.7
Trade
976:234569018
This example shows the order year delivery of the batch trade project. The supplier's product catalog contains one item: the following batch of packaging materials sold in grams. The unit to tax quantity
Ting unit 0 is required to be delivered in boxes. Each box is marked with GTIN, and the actual quantity it contains can be stored in the tray. The tray can be used with SSC to display the total quantity and the price of one gram at the same time. The quality of the change can be verified by checking whether the card is the same as the quantity purchased. See Table A.8 for details. The data selection file records Table A.9 and Table A.10. Example of bulk trade: The supply of the following batch flow of gram-based vegetables is in the form of a package of 2 kg. If the quantity is changed to 6 kg, the order quantity is 7 kg. If the order is in the form of a tray, it is 6 kg. [and to 3. no price g
new single effect data/xiangchuan symbol name
(-1IN #7A :34509:34
13: *4 0751234560n04!
year/1,01 7612445G0n04: 311,G012year*:01 5261231(10: 41: G10.
search disk:00323455r9:1:13
31.3x price/380kk
delivered by toto
month (12.2/g
GTIN 97G123+5X.:11?
3x676133+300017
unit 1:01 9781234560:17 3:02 006415 unit 2019761234500: [7330200016 unit 3.01276.23150017313n036s tongue: c) 37612345300001009
27612730601110231220
x9761351o0ut-7/12.2hgx price/
Table A.6 Standard grouping example unit data document logistics data file
monthly file
—full record
1. 2. 4 Batch trade
Product unit identification
J76123450n0n010691
The total product quality/time
Standard grouping of the project
57612345000117
Total product quality/time
Standard grouping of the project
Trade project data file table A.7
Trade
976:234569018
This example shows the order year delivery of the batch trade project. The supplier's product catalog contains one item: the following batch of packaging materials sold in grams. The unit to tax quantity
Ting unit 0 is required to be delivered in boxes. Each box is marked with GTIN, and the actual quantity it contains can be stored in the tray. The tray can be used with SSC to display the total quantity and the price of one gram at the same time. The quality of the change can be verified by checking whether the card is the same as the quantity purchased. See Table A.8 for details. The data selection file records Table A.9 and Table A.10. Example of bulk trade: The supply of the following batch flow of gram-based vegetables is in the form of a package of 2 kg. If the quantity is changed to 6 kg, the order quantity is 7 kg. If the order is in the form of a tray, it is 6 kg. [and to 3. no price g
new single effect data/xiangchuan symbol name
(-1IN #7A :34509:34
13: *4 0751234560n04!
year/1,01 7612445G0n04: 311,G012year*:01 5261231(10: 41: G10.
search disk:00323455r9:1:13
31.3x price/
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.