JB/T 3244-1999 Basic parameters of reach trucks JB/T3244-1999 Standard download decompression password: www.bzxz.net

ICS53.060
Machinery Industry Standard of the People's Republic of China
JB/T3244—1999
Reach trucks-Basic parameters
Reach trucks-Basic parameters
Published on 1999-06-28
National Bureau of Machinery Industry
Implemented on 2000-01-01
JB/T3244—1999
This standard is a revision of JB3244-83 "Basic parameters of reach trucks". During the revision, the original standard was edited, and the main technical content remained unchanged.
This standard replaces JB3244-83 from the date of implementation. This standard was proposed and managed by Beijing Hoisting and Conveying Machinery Research Institute. Drafting unit of this standard: Beijing Hoisting and Conveying Machinery Research Institute. The main drafters of this standard are Jiang Nan, Shen Wanquan, Chen Xing and Zhang Jingxiang. 1
1 Scope
Machinery Industry Standard of the People's Republic of China
Reach forklift
Basic parameters
Readh trucksBasicparameters
This standard specifies the models and basic parameters of reach forklifts. This standard applies to battery reach forklifts (with forward mast and forward forklifts). The operation mode of reach forklifts is on-board operation: standing or sitting. 2 Model indication method
The reach forklift model is indicated by type, power type and lifting capacity. Improvement code: In alphabetical order of Chinese pinyin. Code for lifting capacity: t
Battery code
Reach forklift code
Marking example:
The first improved battery reach forklift with a lifting capacity of 0.5t is marked as: Reach forklift CQD0.5AJB/T3244—19993 Basic parameters
3.1 The basic parameters of the reach forklift shall comply with the requirements of Figure 1 and Table 1. a) Forward movement of mast
Approved by the State Machinery Industry Bureau on 1999-06-28, Figure 1
b) Fork forward movementbZxz.net
JB/T3244-1999
Replaced JB3244-83
Implemented on 2000-01-01
Rated lifting capacity
Load center distance
Maximum lifting height
Forward distance
Fork length
Minimum ground clearance
Maximum operating speed at full load
Maximum lifting speed at full load
Inclination of mast or fork
Climbing grade at full load
Rated battery voltage
Minimum outside turning radius
Note: The values ​​in brackets can be used as needed. Q
3244-1999
≤1450
≤1500
(3000)
≥100
≤1600
≤1700
≤1800
≤2000
≤2100
The lifting height and fork length of reach forklift should preferably adopt the values ​​in the table, and can also be selected from the following series as needed. 3.2
a) Lifting height series:
2500, 2700,
b) Fork length series:
3300,
3600,
4000,
1200mm
800, 900, 1000, 1150,
5000,
5500,
6000mm
Mechanical industry standard
Basic parameters of reach forklift
JB/T3244—1999||t t||Published by the China Academy of Mechanical Science
Printed by the China Academy of Mechanical Science
(No. 2, Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing Sheet 1/2 Words 6000
Format 880×1230
First Edition in October 1999
First Printing in October 1999
Print Quantity 1-500
Price 500 Yuan
99-910
Mechanical Industry Standards Service Network: http/AvwwJB.ac.cn666
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.