JB/T 8335-1996 Classification and numbering rules for hole series modular fixture components
Some standard content:
Machinery Industry Standard of the People's Republic of China
JB/T 8335—96
Hole series combination fixture components
Classification and numbering rules
1996-{14-11 Issued
Ministry of Machinery Industry of the People's Republic of China
1996-10-01 Implementation
Machinery Industry Standard of the People's Republic of China
Hole series combination fixture components
Classification and numbering rules
Subject content and scope of application
This standard specifies the classification and numbering rules for hole series combination fixture components. This standard applies to hole series combination fixture components with a maximum thread diameter of 10mm, 12mm, 16mm and other components. 2 Classification code of hole series group including fixture components
2.1 Composition of the classification code of components in series combination The classification code consists of six parts and is arranged in the following order: Specification code
Grouping code
Special code
Category code
Variety code
Serialization number
JB/T 8335
2.1.1 Cumulative code
The first part represents the series. The series code of the hole series combination fixture component is represented by the Chinese character hole (Kag>), and the series code is specified as. 2.1.2 Product code
The two-part number represents the variety. The same hole series combination fixture component is divided into three varieties of 10n1m, 12mm, and ?Gmm, which are represented by the two-digit Arabic numerals 10 and 1216. The variety code is specified in Table 1. Table 1
10mm combination fixture component
12mm1. Series of period tool components
1mm ugly combination tool
2.1.3 The third group of codes
New frequency-controlled
Product code
The third group of codes indicates the category. The same variety of hole series components are divided into two major categories for identification, and a one-digit number is used to assist the serial number. The special codes are in accordance with the provisions of the table, approved by the Ministry of Machinery Industry on April 11, 1996
1996-10-01
Natural contact
2.1.4 Group code
Support
JB/T8335
With parts
Regional array
Fasteners
Assembly T.4
The fourth part of the number indicates the type. The same series of components are divided into groups according to shape or function, and the same number is used. The group code is specified in Table 3. 2.1.5 Group code
The fifth part of the number indicates the grouping. The components of the same group of hole series combinations are divided into groups according to the structure, and are numbered in sequence with an Arabic numeral 0~9. The grouping is specified in Table 4. 2.1.5 Specification code
The first part of the abbreviation indicates the specification. Each hole series group is divided according to the size and numbered with two numbers 01~00.
2.2 Determination of the numbering of hole series combinations 3.2.1 Hole series combinations Component classification and numbering shall be in accordance with the provisions of Article 2.1 of this standard. 2.2.1 Manufacturers of other forms and structures of hole series combinations not included in this standard and newly developed hole series combination clamp components shall determine their numbers in accordance with this standard. 3 Classification and numbering examples
Specifications (Rectangular) Grouping (Rectangular base plate)
Long)
Category (basic parts)
Variety (16m)
Series (hole series group) Combined components)
Specifications (floating bearing type specification)
: Group (dynamic bearing)
Group (support assembly)
Category (assembly)
Variety (12mm)
Series (hole series combined components)
JB/TA335
To code
Group code
Group code
Category code
Group period code
|Group code
Category code
Group code
Group code
Category code
Extension code
Group code
Category code
Social code
Group code
Category code
Group code
Classification code
Group code
Interval code
Category code
Red code
Return code
Good time car cup|| tt||Wanying base plate
Grading name
Long tangible base vibration
Stages
Base sense turtle fast
Group name
Medical shape plate
Group name
Happy noodles egg shredded chicken
Group name
Division name
Hole drawing
Square base to plate
Hole broadcast reading
Rectangular base plate
JD/T 8335-6
Class name
Sales name
Station tree special derivative
Square foundation parts
The outer shape is rectangular, with regular positioning holes, end holes and mounting holes on the surface
Other names
Group name
Structural features
Base parts
Rectangular parts
The outer shape is rectangular, with regular positioning holes on the surface. The external shape of the base component is a four-shaped shape, with three right-angle surfaces, and some holes, screw holes or through holes are arranged in the specification. The category book calls it the special name of the plastic base component. The external shape is four-shaped, and there is no good arrangement of positioning holes and installation holes. The alias is the ball. Most of the previous shapes are "two", two refers to the work The surface is larger than the positioning hole, and the auxiliary A is used. The actual surface has certain empty holes to supplement the support. The name of the agent
eight name
Station structure characteristics
Monitoring disk parts
Square box-shaped base research
The outer shape is square, there are four working holes and sensing holes, bottom positioning holes and installation holes are sold separately
Special name
Structure connection
Hole increase through the unified editing parts
The outer shape is square, the large surface specification shows the positioning hole, frequency hole, through-emulsion and T-shaped inspection
The outer tiger-shaped block is long, the large surface regular cloth quantity saving Fixed hole, screw all over the milk and the shape of the character
Class new chemical number
Note to the code
Group code
Total Beijing code
Public group number
Class Shenzhen code and
Ning difference code
Group method number
Stage dynamic
Music education supervision body
Group name
Square film
Square pad
Square support ball
This newspaper direct station price support list
Square sub-step support level
Square double courtyard support record
Group report
Rectangular film Plate
Rectangular plate
Rectangular support
Long-shaped combined support
Rectangular standard support
Rectangular combined support
Group name
IB/T8335-96
Special name
Group name
Zhejuntao
True natural sinking base
One is the plate, the other is the typical support layer, which can be used in the temperature difference camera to form the main material description technology
Inflammation good name
Group name
Conclusion
External rate is not square,The large surface is chaotic
support standard
square support
model shape is square, the large surface has positioning emulsion and through-hole glue penetration shape is square, the large surface is left-handed, and the frequency hole king. The required shape is square, the step is a difference, the large and square fixed line, frequency hole and countersunk hole
part shape is a shape, with a platform price, there are fixed holes, general holes and built on the
outer brand shape is square, with two platforms, large positioning holes, frequency and countersunk
must be more profitable
other names
station structure characteristics
outer shape is square, the large surface has a hole
Chicheng parts
long-shaped parts
outer shape is a rectangular stock, the large surface opening hole refers to the shape of the outer hole is rectangular , the outer shape is rectangular, with a door, there are positioning holes, explosion holes and device holes on the surface
The outer shape is rectangular, with a door, there are positioning holes, explosion holes and holes on the surface
The outer shape is long, with more than twenty work platforms, three work has historical milk, selection holes and anti-holes
Class name
Group name
Structure characteristics
Bearing parts
1. Shape, support parts
The outer shape is 1-shaped, with fixed .. spiral feathers and anti-induction notes on the surface| |tt||Separation code
Extension code
Division code
Category code
Partition code
Generation cattle
Category code
Group code
Group company number
Prohibited code
Group mother
Group code
Yingtong flower mother
Group code
Division generation
Group name
Left support start chain
Right support angle supply
Real dimes||t t||Flame iron deformation bearing
Group name:
Four-shaped plate
Min support
Sexy fan bearing
Bian control support
Group name
Single-degree pad
Five-electric support cabinet
Seven-sided support plate
Red name
Four-sided bearing
Five-sided bearing
Red old name
Hole-shaped square pad
Hole-shaped female test
Long-force bearing
.IB/T B335-96
Continued Table 4
English alias
Group name
Knot machine special certificate
Support
Use to obtain the most evil support parts
Two corners fast surface.1 step has a raw material, or no, low no folding device on both workers are able to operate the milk with a hole,
Go to the tendons, below the left lower start is the symptom hole two use recovery on the surface are all regular with a tube with positioning agent medium lead, or etiquette, this single lung, to see the right lower year is the positioning hole two soft space inside the benefit for the general position, exploration hole seek to pass to, support the internal organs, the surface is light
The shape is iron-shaped, high-end hospital but with positioning and heavy publication source name
Group double name
Knot national special certificate
Outside The shape is a shape, and the large surface has holes
supporting parts
national shape supporting parts
external shape is a reading shape, and there is a positioning and external shape in the human face. The large distribution holes in the human face have a certain shape. There is a large anti-relief in the center, and the surface of the body is evenly soft and flat. There are holes
on it. The new name
reading is called
structural characteristics
external shape is a figure, and the holes in each group on the two parallel support surfaces are fixed and
can be adjusted according to the board free mark multiple words. There are position conditions and requirements on the top surface. From the front, use the empty block on the left
to batch the form training and training. The large figure is compared with the customized holes and the style holes, and the stone is separated from the shape block
column name
Non-name
When the road is connected, let
Support rate work
Multi-faceted dragon or
The mesh surface has positioning holes, and the square support surface with fixed holes is required to pass through the hole. The square support surface with fixed holes is required to pass through the child's square support.
Specially called
Step on the medical certificate
The hole blocks the epidemic support
The external rate shape is missing and the shape is special. There are fixed holes on the surface, especially the first shape of the special shape. There are fixed bodies, fixed shapes and treasures on the surface. The shape is rectangular, and there are also reunion holes, also fine and active remarks
Category number
Group management code
Group busy
Category code
Grouping capital
Special heart|| tt||Certification number
Aircraft number
Category code
Group code
Division code
Group name
Fixing pin
Hollow locating
Elastic locating pin
Eccentric locating pin
Group name
Adjustable locating plate
Adjustable locating plate
Group name
Solid fixing block
Mounted locating plate
Optional locating plate
Group name
Moving fixing plate
Mondo fixing plate
Division name
V3 block
V-shaped replacement
JB/T 8335—96
Continued Table 4
Category Name
Group Name
Station Test Features
Location Parts
Location Condition
The back is in the shape of a circle, inserted into the positioning hole, used for the positioning of the element network. The entire surface is a hollow circle. The cross section is a hollow picture shape, the positioning surface of the city and the port is a national shape, and the positioning ends are relatively eccentric. Category Name
Group Name
Location Tree Features
Location Parts
Rectangular Multi-positioning State
There is a long mesh hole at one end of the positioning hole, and a fan blade is provided at the bottom. Linear measurement can be performed
There is a long mesh hole on the boss at one end of the positioning hole. Guo Kong, I have a positioning broadcast, can be used for straight line Xie these
Processing name
Group average name ball
New special certificate
Two concentric outer cylindrical average shape
Location surface dangerous surface, with positioning guide
Fixed space 4
Four shadow fixed cow
The fixed surface is the same hanging surface, the center has a fixed hole and a screw hole for connection
Class name
Issue number name
Station special certificate
Location piece
English shape fixed pull piece
The two center outer surfaces are injected to Haoyu for a deformation, "a vomiting shape is also a model shape with positioning
Category name
Group name| |tt||Structural features
Shaped pad
Shaped support
Positioning piece
V-shaped positioning piece
One end has a shape, and the other end is a scientific, correctable pad
Angle recovery with V-shaped surface
Category code
General code
Important code size
Helong number
Grouping number
Category code
Kaibei code
Stage chemistry
Category code
Special code
Class code
Group code
Group ratio number
Strong code
Male code Code
Code
Title
Sliding flow
Location pin
Hole passage
Confidence fixed empty charge pin
Passage
It should be
Name
Location plate
Installation old line
Square screw tile wall cabinet
Square shadow fixed adjustment wall cabinet
Group name
Single hole inspection charge discount
Double hole moistening plate
Age pregnancy disorder adjustment plate
Rectangular positioning adjustment number
Group name
Shape frequency adjustment plate
Name
To the shadow solution,Ketosis
JB/T 833596
Classification name
Group name
Joint and line
Location piece
Rated value piece
The pin is fixed at the right end, the other end is the fixed length pin, the other end is the positioning chain, one end is the positioning hole, the other end is the reverse axis that cooperates with the component cabinet
Agent name
Detailed name
Special features
Location piece
The same as the single work of death, there are protective and limited work marks|| tt||English name
Composite name
#Evidence
Thank you for the money
Square adjustment piece
The outer shape is also square, not two faces and burning and flowing, the outer shape is square, Dali has fixed and anti-category name
Zhegangte has a standard hole for a station with a long
There are two holes, and there is a long country
Long and shaped adjustment piece
Tower is a platform, there is a missing nine on it, a pair of long holes outside the Kang shape is long, square expansion, six sides have positioning several expansion sinker other name
Other name
The knot is special
Adjusting parts
Separate adjusting parts
The external shape is o-shaped, with burning emulsion and trapped hole on the surface.
Group name
The external shape is pictorial, with gingival tile and countersunk hole on the surface.
Category code
Group code
Classification number
Code card
Public group book
Classification code
Special code
Return code
Special limit code
Category code
Reading code
Installation code
Class Other generation
Group generation
Group generation
Group name
Scheduled placement
Prefabricated adjustment angle
Group name
Half jade plate
Long press plate
Real day plate
Shaped E plate
Guard distance name
Closed press plate
Push plate
Guard year name
Odd head press plate
Dimension name
Open press plate
Seven-shaped press plate
Group name
Induced press plate
JB/T R335-96
Continued Table 4
Condensed to the name
Group Winter Korea
Toll line
Pre-adjustment year
Station object to hold the correct
Appearance shape, there are certain empty holes on the human face, which can be easily processed according to actual needs. The shape of the hole or positioning hole is used as a dimension shape, one has a positioning hole and a navigation hole, and the other can be based on the actual needs to work out the screw in the appropriate position without positioning. Type name road
Group name two
Through the plate leveler
Method plate surface base plane, the source part of the column head can be networked when the second 1st item
Category name mother
Group name
Conditions
Flat plate
Jointed plate
Outer shape is long, with a raised pattern in the middle of the back plate and three effective holes
Used with joint plate, there are ten holes, which can be specially perturbed
Group average name
Outer shape is fire head-shaped
Alias
Heat test name
Partial features
One state has an opening
Outer shape
Intelligent name
Group test name
Structure support
Real worry
Pressure fittings| |tt||Open plate pressing
Frequency pressing parts
Surface pressing
The external shape is round with an opening. It can be quickly loaded with postage
Category code
Group code
Opening code
Digital code
Zuzhen code
Group code
Specialization code
Group code
Category codebzxZ.net
Group code
Group code
Category code
Group code
Classification code
Special code
Sub-let code
Group name
Stud bolt
Six-headed bolt
Carbon bolt
Thread name
Special hexagonal screw
Pressure screw
Set screw
Secreting name
Flat washer
Dimensional washer
Partition name
Hexagonal mother
Six-headed mother
Shell
Special name
Flat support
Spherical support
Flat bearing
Spherical bearing
Modified bearing
JB/T 8335-96
Continued Table 1
Class name
Group name
Screws with similar thread diameters at opposite ends
Head is hexagonal
Bolts with two different sizes at both ends
Group name
Structural features
Head is round head with hexagonal socket
Auxiliary parts with rolling body
Head has a slotted opening
Class name
Other names
Stationary name||tt ||The outer shape is a surface shape, the two sides are parallel flat new firmware
shape, one
The outer shape is a surface travel, one is flat, the other side is state-specific and swallow name
Group name
Medicine structure
The outer shape of the nut
The outer shape is a large angle shape, and with a smooth noise mother
The outer shape is large, but the larger the ticket mother
disassembly shape, with a control flower limit
Category name
For, one has an outer
To the ball, one end has an external screw effect
It is flat. With a sick sugar system in front
then there is no spherical quality, and the other end has an internal screw effect
it is born. The other end has an internal object twist
forbidden country parts
its world parts
supporting its parts
group boundary code
group book 9
English plan number
group generation
class plan my number
group code
division number
class plan code
channel plan number
sister busy number
award different generation
signal different code
division ancestor name ring
Fat support
Dust and dust prevention
Group name
E-support
Elastic bearing
Group name
Three-rotation bracket
Group name
Floating bearing
Floating pin support
Movable V seat
Group name
Three-way self-centering type dryer
Adjustable positioner
Group name
Directional point line
Two-way point
Adjustable position
JB/T 8335-96
Re-install 4
Category name
Group name
Special features
Special features on the specification of the old and other small special entry positioning hole station can stop the iron and other objects from entering the blast hole Special frequency support name
Engraved name network
Control special migration
Other parts
Dustproof parts
Other companions
Deep forbidden health companions
Can be combined with the appropriate height of the three-board support and the internal system to use the treatment column
Can be The medical support that will be supported on the pressure
Category name
French flower plate
Newly available point before the confluence
Door dignity dynamic support
Intersection name
Network name
Editing street school
Can play a supporting role in the text
Dynamic support with dimension
With V your floating support request
With √ shape of the support
Category name
Ancestor name
Features
Li Ri Er,The automatic centering mechanism can be used to make the disk assembly part and the disk assembly part. The part can move the coordinates of the seat of the hole in one direction horizontally and adjust the position of the positioning hole to ensure the safety of the seat and the rotation of the positioning hole. The support bed of each hole in the room can be checked and adjusted.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.