JB/T 8774.1-1998 Products produced according to this standard comply with the relevant provisions of GB/T 5226.1-1996 "Electrical Equipment for Machinery Industry Part 1: General Technical Conditions". This standard specifies the main dimensions, markings, technical requirements, tests and inspections of cable ties, an auxiliary part of the electrical system of machine tools. This standard applies to detachable cable ties used to bundle cables or wires in the electrical system of machine tools. It can also be used as a reference for the electrical systems of other machines. JB/T 8774.1-1998 Cable ties, an auxiliary part of the electrical system of machine tools JB/T8774.1-1998 Standard download decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
JB/F8774.1--8774.15—1998
Machine Tool Electrical System Accessories
1998-07-17 Issued
National Machinery Industry Bureau
1998-12-01 Implementation
JB/T8774.1-1998Www.bzxZ.net
This standard is formulated on the basis of summarizing many years of experience in producing machine tool electrical system accessories. Products produced in accordance with this standard will comply with the relevant provisions of GB/T5226.1:1SS6.1.1 General Technical Components for Electrical Equipment of Industrial Machinery Part 1. This standard is issued by the National Technical Committee for Standardization of Machine Tools. This standard is sponsored by Beijing Machine Tool Research Institute, Ministry of Machinery Industry: This standard is approved by: Beijing Machine Tool Research Institute, Ministry of Machinery Industry, Taizhou Yuntong Electric Material Co., Ltd., Beijing First Machine Tool, Beijing Second Machine Tool Factory
1 Model
Machinery Industry Standard of the People's Republic of China
Machine Tool Electrical System Accessories
JB/T8774.11998
This standard specifies the main dimensions, certification, technical requirements, tests and inspections of machine tool electrical system accessories. This standard is applicable to the removable support in the electrical system of machine tools. Other electrical systems of machinery can also be used accordingly. 2 Referenced Standards
All the following standards, including the above provisions, constitute the text of this standard through reference in this standard. At the time of publication of this standard, all six versions are valid: All standards are revised, and the parties using this standard should choose to use the latest version of the following standards. G/T23192 2nd edition
Main dimensions
The main dimensions of the belt are shown in Figure 1! :
Long-terminal
Line end machine
2-16 -~34:
The marking of the belt is indicated by the name and the full number. For example, the marking of 16 is:
Tie 16JB771
Guohao Machinery Industry Bureau 1998-07-17 approved 2
1498121 implementation
Technical requirements
JB/T 87T4.11998
5.1 The material of the support belt shall meet the requirements of HG12349. 5.2 The surface of the cable tie should be flat and smooth, without pores, burrs and defects such as strips. 6 Test and inspection
6.1 Inspection of cable ties. The material, size, and processing quality of the cable tie should comply with the provisions of Chapter 3 and Section 5. 62 Cable ties should meet the following requirements during testing (sampling): 900
) tensile strength
b) cable
8000 times without breaking,
6~10g0mi without deformation.
一40. Folding type:
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.