JB/T 9930.2-1999 Vertical Band Saw Series JB/T9930.2-1999 Standard Download Decompression Password: www.bzxz.net
Some standard content:
IC575.080.30 Machinery Industry Standard of the People's Republic of China JB/T 9930.1-9930.4—1999 Vertical Band Saw 1999-05-20 Issued National Bureau of Machinery Industry 2000-01-01 Implementation B/T9930.2—1999 This standard is revised on the basis of JBz279.8 "Vertical Band Saw Series". This standard is consistent with the technical content of JB/Z279.--87, and has only been re-edited according to relevant regulations. This standard is part of JB9930 "Vertical Band Saw Series Standard". This series of standards includes the following four parts: JB/T9930.1-1999 Vertical Copper Bed Sheet Efficiency JBT9930.2-1999 Vertical Coil Bed Series Harmony JB.T9930.3-1999 Vertical Lead Bed Accuracy Inspection JR/T9930.4-1999 Vertical Constant Thirst Bed Technical Conditions This standard replaces Pan 2-1 from the date of implementation. The National Standardization Technical Committee for Cutting Machine Tools was proposed. This standard was issued by the National Standardization Technical Committee for Cutting Machine Tools Sawing Machine Branch: This standard is responsible for the unit: Hunan Machine Tool Factory. This standard was first issued in 1987. The standard specifies the series structure, purpose, characteristics, varieties and number of vertical band saws. JB/19930.2-1999, 127967. This standard applies to newly designed general-purpose vertical band saws with a large thickness of 125-500 (L). 2 Reference standards The following standards contain provisions that constitute the provisions of this standard by being cited in this standard. When this standard is published, the versions shown are valid. All standard parts will be subscribed and used. When formulating this standard, the parties may also use the latest versions of the following standards: JR7963.2-1997 Basic dimensions and tolerances of classic cutting band saw blades JB930.3-1999 Vertical band saw machine accuracy test series composition The series of vertical test band saw machines are shown in Figure 1 Vertical band saw machine This type of band saw machine Series structure Large-scale vertical band saw machine Digitally controlled vertical band saw Digitally controlled vertical band saw machine Figure 1 Series composition of vertical band saw machine Application and performance The type of machine tool is shown in Figure 2 , as shown in Figure 3. Figure 2 type National Machinery Industry Approval 1999-05-20 4 Large throat type 2000-01-01 implementation 4.1 Vertical band saw machine JB/T9930.2—1999 Type requires sawing technology. Ordinary flat, basic flat series, suitable for single piece, small batch or batch production in metallurgy, general machinery, light industry, etc.: can do straight line or curve sawing, mainly used to add inner and outer wheel surface 1 piece (such as templates, molds and other special-shaped 1 can also be used for cutting and cutting of plate parts: can be used for cutting black metal, non-ferrous metal development with And plastic, bakelite and other non-metallic materials, the machine tool has a saw blade level change device: the lower part is powered or F-type feed device. The machine tool scale should comply with the provisions of JBT9930.3, and the following structural features are required: 1) There are two saw wheels, one for manual and one for digital: 6) There is a band saw blade tensioning device; The lower work table can be tilted at a certain angle in the left and right directions; ) There is a band saw blade net direction device: ) There are shearing, welding, and other functional devices. 4.2 Digital vertical belt temporary bed The machine tool has the same purpose as the corresponding basic series, and is mostly used for the wrong cutting of molds and sample wheels. In addition to the structural features of the basic series, the machine tool should also have the following structural features: 1) It has a multi-layer workbench; 2) It has an automatic control system for one or two coordinate transfer actions; 3) The longitudinal and transverse movement of the workbench is equipped with independent service devices; 4) The displacement of the longitudinal and transverse movement of the workbench should be displayed by a digital display device. 4.3 Large-end deep-type belt saws Large-throat vertical band saws are a basic series of machines, suitable for single-piece and small-batch production in factories such as heavy machinery, sawing furnaces, lead making, extrusion and injection molding, and can do straight or curved sawing: mainly used for sawing off sheets and processing large-size molds and samples, and can cut metals, non-metals such as metal cladding, plastics, and rubber. The machine tool has a saw blade speed change device, a motorized feed or manual feed cover, and the machine tool speed reduction meets the requirements of JB/739.3. The machine tool should have the following structural features: a) There is a ground motion, a war motion, and multiple saw wheels in the middle: b) There is a saw blade lifting and stretching device: c) There is a strip guide device: d) There is a device for shearing, welding, spraying and staggering strips, etc. 4.4 Digitally controlled large-throat vertical belt unwinding machine The machine tool has the same basic The same stamping machine series, using ten-foot-tall molds, templates and wheels, saws and machine tools, in addition to the structural characteristics of the basic model series, should have the following structural features: a) It has a multi-layer working table; b) It has one or two coordinate continuous action automatic control systems: 1) The vertical and horizontal movement of the working table are respectively equipped with independent servo devices; the displacement of the vertical and horizontal movement of the working table should be displayed by a digital display device, 5 types of vertical band saws and are also shown! , United Nations frequency thickness sm Big original belt Text style staggered bed JB/T9930.2—1999 Character pull type belt aluminum technology Big suction depth vertical belt data bed Integrated control large collection certification belt sugar bed Note: "" in the table means that there is such analysis. The parameters of the vertical band saw machine are shown in Table 2. Pre-installation of large error Long belt adjustment and filling screen (according to JD/E7963.2) Cooker recording speed Low speed detection limitwww.bzxz.net High speed limit Operating platform angle · Main motor power ±: ±10%; right: *30° 1) The angle of the operating platform deeper than the hook bed and the change of the style is determined in the design. 2.2 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.