title>GB/T 16146-1995 Standard for control of radon concentration in housing - GB/T 16146-1995 - Chinese standardNet - bzxz.net
Home > GB > GB/T 16146-1995 Standard for control of radon concentration in housing
GB/T 16146-1995 Standard for control of radon concentration in housing

Basic Information

Standard ID: GB/T 16146-1995

Standard Name: Standard for control of radon concentration in housing

Chinese Name: 住房内氡浓度控制标准

Standard category:National Standard (GB)

state:in force

Date of Release1996-01-02

Date of Implementation:1996-07-01

standard classification number

Standard ICS number:Medical and Health Technology >> 11.020 Medical Science and Healthcare Devices Comprehensive

Standard Classification Number:Medicine, Health, Labor Protection>>Health>>C57 Radiation Health Protection

associated standards

Publication information

publishing house:China Standards Press

other information

Release date:1995-12-21

Review date:2004-10-14

Drafting unit:Ministry of Health Hygiene Laboratory

Focal point unit:Ministry of Health

Publishing department:State Administration of Technical Supervision Ministry of Health of the People's Republic of China

competent authority:Ministry of Health

Introduction to standards:

This standard specifies the control standard for the concentration of radon and its progeny in residential air. This standard applies to public residential buildings (including underground spaces used as residential buildings). This standard does not apply to non-residential ground buildings and underground buildings. GB/T 16146-1995 Control standard for radon concentration in residential buildings GB/T16146-1995 Standard download decompression password: www.bzxz.net

Some standard content:

National Standard of the People's Republic of China
Standards for controlling oxygen concentration in dwellings
Standards for controlling oxygen concentration in dwellings
1 Subject content and scope of application
This standard specifies the control standard for oxygen concentration in the air of dwellings. The standard applies to residential buildings for public use (including underground spaces used as dwellings): This standard does not apply to non-residential ground buildings and underground buildings. 2 Reference standardsbzxz.net
CB6566 Standard for radiation health protection of building materials GB0763 Standard for limiting radioactive substances in industrial waste residues used in building materials GB/T16147 Internal flask measurement of hydrogen concentration in air IEJ/T605 Specification for measurement of hydrogen and its daughters
3 Control standards
GB/T16146-1995
The exposure of the public to oxygen concentration in the air from oxygen and its daughters is an additional exposure to the public from natural radiation sources. According to the controllability, the housing is divided into two categories: existing and newly built, and the corresponding control standards for oxygen and its progeny are given respectively. 3.1 For existing housing, simple remedial actions can be considered to control the exposure to hydrogen and its progeny, so that the annual average value of the equilibrium hydrogen concentration in the housing does not exceed 200 Bg·m-3.
3.2 For newly built housing, it should be controlled during design and construction so that the annual average value of the equilibrium oxygen concentration in any room does not exceed 100 Bm-3
4 Implementation of the standard
4.1 When designing and constructing new housing and taking simple remedial actions for existing housing, the selected building materials must meet the requirements of GB6566 and GB6763.
4.2 Simple remedial actions to control and reduce the radiation exposure of hydrogen and its sub-atomic elements to the public in existing residential buildings include simple and effective oxygen reduction measures such as strengthening ventilation, spraying on the indoor surfaces, and blocking the gaps in the walls. Destructive actions (reconstruction, partial demolition) for chemical houses are remedial actions that need to be carefully considered and should be guided by protection optimization. 4.3 The measurement method of nitrogen and its sub-atomic element concentration in residential buildings can adopt the method of GB/T 16117 or FJ/T 605. Approved by the State Administration of Technical Supervision on December 15, 1995 344
Implementation on July 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.