JB/T 994-1977 Hexagonal flat nuts for pipe fittings
Basic Information
Standard ID:
JB/T 994-1977
Standard Name: Hexagonal flat nuts for pipe fittings
Chinese Name:
管接头用六角扁螺母
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1977-01-17
Date of Implementation:1977-05-01
standard classification number
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
other information
Introduction to standards:
JB/T 994-1977 Hexagonal flat nuts for pipe joints JB/T994-1977 Standard download decompression password: www.bzxz.net
Some standard content:
Standard of the First Machinery Industry Department of the People's Republic of China
Small hexagonal flat nuts for pipe fittings
JB994-
Replaces JB994-67
This standard only specifies small hexagonal flat nuts for welding, ferrule and flared pipe fittings. 30
Marking example:
D≥0.95Sbzxz.net
Small hexagonal flat nut with thread diameter d52mm and pitch 2mm: nut M52×2JB994--77
Issued by the First Machinery Industry Department of the People's Republic of China, proposed by the Standardization Research Institute of the First Machinery Industry Department4
Implemented on May 1, 1977
Drafted by Jinan Foundry and Forging Machinery Research Institute, etc.d
M33×2
M39×2
M45×2
M52×2
M60×2
Nominal size
JB.994--77
Total 2 pages Page 2
Nominal size
Note: M10×1, M12×1.25, M14×1.5, M16×1.5, M18×1.5, M20×1.5, M22×1.5, M24×1.5, M27×1.5, M30×1.5, M36×2, M42×2 sizes and their markings shall be selected in accordance with GB53-76 "Small Hexagonal Flat Nuts".
Technical conditions shall be in accordance with GB61-76 "Technical Conditions for Nuts". 5
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.