title>GB/T 14574-2000 Labeling and verification of noise emission values ​​of acoustic machines and equipment - GB/T 14574-2000 - Chinese standardNet - bzxz.net
Home > GB > GB/T 14574-2000 Labeling and verification of noise emission values ​​of acoustic machines and equipment
GB/T 14574-2000 Labeling and verification of noise emission values ​​of acoustic machines and equipment

Basic Information

Standard ID: GB/T 14574-2000

Standard Name: Labeling and verification of noise emission values ​​of acoustic machines and equipment

Chinese Name: 声学 机器和设备噪声发射值的标示和验证

Standard category:National Standard (GB)

state:in force

Date of Release2000-03-01

Date of Implementation:2000-01-02

standard classification number

Standard ICS number:Metrology and measurement, physical phenomena>>Acoustics and acoustic measurement>>17.140.20 Noise from machines and equipment

Standard Classification Number:Environmental Protection>>Environmental Protection Sampling, Analysis and Test Methods>>Z32 Noise and Vibration Test Methods

associated standards

alternative situation:GB/T 14574-1993

Procurement status:eqv ISO 4871:1996

Publication information

publishing house:China Standards Press

ISBN:155066.1-16868

Publication date:2004-04-10

other information

Release date:1993-08-28

Review date:2004-10-14

Drafting unit:Mechanical Industry Environmental Protection Institute

Focal point unit:National Technical Committee on Acoustic Standardization

Publishing department:General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

competent authority:Chinese Academy of Sciences

Introduction to standards:

This standard specifies the following contents related to machines and equipment: - Indication of noise emission values; - The noise emission values ​​of the product and acoustic information related to the product should be provided in the technical documents; - The verification method of the noise emission values ​​is explained. The noise emission indication values ​​used in this standard can be divided into single-value noise emission indication values ​​Ld or dual-value noise emission indication values ​​L and K. L is the directly measured noise emission value, K is the uncertainty associated with the measurement, Ld is the sum of L and K, the upper limit value that cannot be exceeded within the confidence range obtained by repeated measurements, and Ld corresponds to the Lc label value defined in GB/T14573.1. GB/T 14574-2000 Indication and verification of noise emission values ​​of acoustic machines and equipment GB/T14574-2000 Standard download decompression password: www.bzxz.net