title>JB/T 81-1994 Raised panel flat welded steel pipe flange - JB/T 81-1994 - Chinese standardNet - bzxz.net
JB/T 81-1994 Raised panel flat welded steel pipe flange
Basic Information
Standard ID:
JB/T 81-1994
Standard Name: Raised panel flat welded steel pipe flange
Chinese Name:
凸面板式平焊钢制管法兰
Standard category: Machinery Industry Standard (JB)
state: in force
Date of Release 1994-12-09
Date of Implementation: 1995-10-01
standard classification number
Standard Classification Number: Machinery>>General Parts>>J15 Pipe Accessories
associated standards
alternative situation: JB 81-1959
Procurement status: DIN 2535~2547 NEQ DIN 2573~2637 NEQ guest 12815 EQV
Publication information
publishing house: Machinery Industry Press
Publication date: 1995-10-01
other information
drafter: Li Junying, Wu Zhenjia, Zhang Fenglin
Drafting unit: Mechanical Standardization Research Institute of the Ministry of Machinery Industry, Harbin Boiler Factory and Hebei Petrochemical High Pressure Pipe Fittings Factory
Focal point unit: Mechanical Standardization Research Institute of the Ministry of Machinery Industry
Proposing unit: Mechanical Standardization Research Institute of the Ministry of Machinery Industry
Publishing department: Mechanical Standardization Research Institute of the Ministry of Machinery Industry
Introduction to standards:
This standard specifies the types and dimensions of steel pipe flanges for convex panel flat lamps with nominal pressures PN of 0.25, 0.6, 1.0, 1.6, and 2.5MPa. This standard is applicable to convex plate flat welded steel pipe flanges with nominal pressure PNO.25~2.5MPa. JB/T 81-1994 Convex panel flat welded steel pipe flange JB/T81-1994 Standard download and decompression password: www.bzxz.net
Some standard content:
Machinery Industry Standard of the People's Republic of China Convex panel flat welded steel pipe flange Theme content and scope of application JB/T81...94 Generation 8i This standard specifies the type and dimensions of convex plate flat welded steel pipe flanges with a nominal medical strength PN of 0.25.0.6.1.0.1.6.2.5MPa. This standard applies to convex plate flat welded steel pipe flanges with nominal pressure PN0.25~2.5MPa. 2 Quoted standards JB/T74 pipeline flange technical conditions 3 The type and size of the flange should comply with the regulations in Figure 1 and Tables 1 to 5. The technical requirements of the small K Figure 1 method are in accordance with the provisions of JB/T74. 4 The nominal pressure of the flange and the maximum allowable working pressure at different temperatures are in accordance with the provisions of Appendix B of JB/T74. 5 6 Marking Example Convex sheet-type flat-welded steel pipe manufacturing method with nominal diameter 100mm, nominal pressure 2.5MPa, size series 2: Method 100-25JB/T 81---94 Convex plate flat welded steel pipe with nominal diameter 100mm, nominal pressure 2.5MPa, size series 1. Legal benefit: flange 100-25 (series 1) JB/T81-94 Ministry of Machinery Industry of the People's Republic of China Approved on 1994-12-09 354 Implemented on 1995.10-01 Pipe Nominal Diameter DN -.|| tt||1 15 20 25 32 40 30 6.3||tt| |80 100) 125 Outer diameter A - .. 14||tt ||1.8 25 32 38 15 57 78 89 108 133 [59 150 (175) 194 1219 200 (225)| |tt||245 250 340 350 100 150 500 600||tt ||70 800 SOG 1000 1200 1400 273 325 377 126 480 530 630 720 8 920 1020| |tt||1220 1120 [h 1620 Flange outer diameter JB/T 81 .- 94 Table 1PNo.25MPa convex panel type flat welded steel pipe flange traces ||80 90 100 1209 130 140 160 190/185||tt ||210/205 240/235 265/260 290 320/315 340 375/370| |tt||440/435 490/485 540/535 595/590 645/6-10 755||tt ||860 975 1075 1175 1375 1575 1 790/1 785 diameter| |tt||K 50 55 63 75 90 100 110||tt ||130 150 170 200 L 225 255 280 305 335 395 44.5 495 550 600 705 810| |tt||920 1020 1120 1320 1520 1730 continue end||tt ||Screw hole diameter L Series 1/Series 2 12 12 12 12||tt| |14 14 14 14 18 18 18 18 18 18 18 18 23 23 23 23 23|| tt||26/25 26/25 30 30 30 30 30 30 Bolts, studs Quantity 4 4 4 4 4 4 4 8 8 8 8 8 12 12| |tt||12 16 16 16 20 24 24 24||tt ||28 32 36 10 Thread Th. Series 1/Series 2 M10 MJO M10 MIo M12 M12 M12 M12 M16 M16| |tt||M16 M16 MI M16 M16 M16 M20 M20||tt ||M20 M20 M20 M24/M22 M24/M22 M27 M27 M? ? N127 M27 M27 Dense surface size d 32 4||tt| |50 63 7) 80 9 110) 125 145||tt| |175 200 230 255 280 310 362 412 462 518 568 670 775 880 980 1080 1280|| tt||1480 1690 2Www.bzxZ.net 2 3 3 3 3||tt| |3 3 3 : 4 3 5 L 法盖法》 小是 肉很||tt| |F 1 1 12 12 12 12 13 1 14 14 1.1 G 16 1s 20 22|| tt||H 19 26 33 39 16 59 75||tt| |T1 135 161 196 222 248 275 , 22 :328 38 22 1.3 22 2-1 2 2 26 26 28 30 30 32 32 184| |tt||634 31 724 21 984 1021 1224 112||tt ||1G24 法上 论论 道发 (1. 25 0.25 0.45 (0.81 : 0.95 1.4 1.13 1. 2. 26. 2.78 3.49||tt ||3.86 i.s8 5.933 7.52 9.-10 20. 11.7 Ti.! rn.2 21.3 29. 1 36.7 .2 32 7 6. 78. :.. 3 3.319 公称 通很 N 10| |tt||15 20 25 32 40 50 65 80||tt ||100 125 150 (175) 200 (225) 250 300| |tt||350 100 450 500 600 700 800 900||tt ||1000 356 管子 外很 A 14 18 25||tt| |32 38 45 57 73 89 108 133 159 194 219 245 273 325 377 426 480|| d| |tt||JB/T 81-94 表2PNO.60MPa凸表式式平没钢制管谢机制作连 螺梓孔 中心圆 系系1/系系2 75 80 90 100 120 130 140||tt ||160 190/185 210/205 240/235 265/260 290 320/315| |tt||340 375/370 440/435 490/485 540/535 595/590 645/640 755 860 975 1075 1175 diameter K 50 55 65 75 90 100 110 130 150| |tt||170 200 225 255 280 305 335 395||tt ||445 495 550 600 705 810 920 1020 1120. |tt||12 12 14 14 14 14 18 18||tt ||18 18 18 18 18 18 23 23 23 23 23 26/25 26/25 30 30 30||tt ||寸 quantity 4 4 4 4 4 4 4 4 4 4 8 8 8 8 8| |tt||12 12 12 16 16 16 20 24||tt ||24 24 28 螺梓、螺柱 螺纹Th. 系系1/系系2 M10 Mi0 M10 M10 M12 M12||tt| |M12 M12 M1f M16 M16 M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M24/M22 M24 /M22 M27 M27 M27 工业面包装 d 32 40||tt| |50 60 70 80 90 110 125 145 175 200 230 255 280 310 362 412 462|| tt||518 568 670 775 880 980 1080 2||tt| |3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 5 5|| t | tt||12 12 14 14 16 16 16 16||tt| |18 18 20 20 22 22 22 24 24 26 28 28 30 30 32 32 34|| tt||36 15 19 26 33 39 46 59||tt| |75 91 110 135 161 196 222 248 276 328 380 430 484 534 634 724 824|| tt||924 1024 mm 艺院 论论 道发 kg 0.31||tt ||0.34 0.54 0.64 1.10 1.22 1.35 1.67 2.48 2.89 3.94 4. 47||h||5.54||h||6.07||h||6.60||h||8.03||h||10.30||h||12.59||h||15.20||h||17.59| |tt||20.67 26.37 37.10 46.20 55.10 64.36 公称 通很|| tt||DN 10 15 20 25 32 40 50||tt| |65 80 100 125 150 (175) 200 (225)|| tt||250 300 350 400 450 500 600 管子||tt| |外很 A 14 18 25 32 38 45 57 73 89 108 133 159 194 219 245| |tt||273 325 377 426 480 530 630 蛋外很 D JB/T81-94 3PN1.0MPa凸光式平没钢制管蛋线包装表3 连 螺梓孔 中心圆 系系1/系系2 90 95 105 115 140/135| |tt||150/145 165/160 185/180 200/195 220/215 250/245||tt ||285/280 310 340/335 365 395/390 445/440 505/500| |tt||565 615 670 780 diameter K 60 65||tt ||75 85 100 110 125 145 160 180 210 240 270 295 325 350 400 460 515| |tt||565 620 725 E 尺 接 螺栓孔化合 1| |tt||寸 quantity 系列1/系列2 14 14 14 14 18 18 18 18 18 18 18 23 23| |tt||23 23 23 23 23 26/25 26/25 26/25 30 4 4 4 4 4 4 4 4 4 8 8 8 8 8 8| |tt||12 12 16 螺梓、螺柱 螺纹Th. 系系1/系系2 M12 M12 M12 M12 M16 M16||tt| |M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M20 M20 16 20 20 20 M24/M22 M24/M22 M24/M22 M27 工业面包装 d 40 45|| tt||55 65 78 85 100 120 135 153||tt| |185 210 210 265 295 320 368 428 482 532 585 685 2 2 2 2 2|| tt||3 3 3 3 3 3 3 3||tt| |3 3 3 4 4 4 4 4 5 艺艺艺 小明 内很 B 12 14 14 16 18 18 20 20 22 24 24 24| |tt||15 19 26 33 39 46 59 75||tt ||91 110 135 161 196 222 24 24 26 28 28 30 30 32 36 248 276| |tt||mm 艺院 论论 道作 kg 0.46 (0. 51 0.75 0.89 1.40 1.71 2.09 2.84 3.24 4.01| |tt||5.40 6.67 7. 44 8.24 9.30 10.70 112.90 328 380 16.90 43021.80| |tt||484 534 634 24.40 27.70 39.40 357 公称||tt ||通很 DN 10 15 24 25 32 40||tt| |50 65 St 1Ca 25 150 (175) 200||tt| |(225) 25 300 350 100 450 50m 600||tt| |子 外很 14 18 25 32 38 45 57 73 89 108 133 159 19.4 219 245| |tt||1273 $23 377 426 480 530 630 358||tt ||色外很 JB/T 81-94 表4PN1.6MPa凸光式平没钢制管色制制连 軺孔 中心圆 系系1/系系2: 90 5.5 105 115 140/135 150/145 1657160 185/180 200/195 220/215 250/245 285/280| |tt||310 3407335 365 405 460 520 580 640||tt ||715/705 840 diameter K 60 65 85 100||tt ||110 125 145 160 180 210 2.10 270 295 325 355 110 170 525 585 650 770| |tt||接 軺没孔化合 1. 寸 水度 系列1/系列2 14| |tt||11 14 14 18 18 18 18 18||tt ||18 18 23 23 23 25 26/25 26/25| |tt||26/25 30 30 34 36/41 4 8 8 8 8 8 1.2 12 12 12 16| |tt||16 20 20 軺梓、螺柱 軺纹T 系系1/系系2 M12| |tt||M12 M12 M12 M16 MlG M16 MI M16||tt ||M16 ME M20 M20 M20 M20 M24/M22 M24/M22| M24/M22 ||法“法》 小明「内很 0 45 ta 78 8:5 100 120 135 155 185 210 240 265| |tt||295 320 375 -135 185 343 fo8 718|| tt||3 3 3 3 3 3 4 4||tt| |11 1 2 2-1 26 28 28 30||tt| |1 G i lt : 133 161 1196 19 mr 法 设计 道作 kH , 9.71 0.87|| tt||1.18 J. 2. () 2.61 3. G、1 .92 8. 10.10 248 11.74) 30||tt ||32 276 328 3.4 .70 13. 1: 30 33. 30 88 136 31.43 10.2 1 56||tt ||531 53. 7. . 公称 通很 TN 10 15 20 25 32 -40 50 65 80 100 125 150 (175) 200 (225) 2503 300 330 100||tt| |450 300 臂子 外很 A 14 18 25||tt| |32 38 45 57 73 89 108 133 159 19-1 219 243 273 325 377 426 180 530 艺外外很 表5 JB/T81--.94 PV2.5MPa凸光式式乎没钢制管法盖化学连 螺梓孔 中心國 diameter 系系1/系系2 90 95||tt| |105 115 140/135 150/145 165/160 185/180 200/195|| tt||235/230 270 300 330 360 395 425 485|| tt||5557550 620/610 6707660 730 K 60 65 75|| tt||85 100 110 125 145 160 190 220||tt| |250 280 310 340 370 430 490 550 600 660 接 尺 螺梓孔化合 1 系列1/系列2 14|| tt||14 1.1 18 18 18 18 8 23||tt| |26/25 26/25 26/25 26/25 30 30 30||tt| |34 36/34 36/34 36/41 軺梓、螺柱 quantity 4||tt ||4 4 4 8 8 8 8 8 12 12 12 12 16 16 16 20 20| |tt||軺纹Th 系系1/系系2 M12 M12 M12 M12 ME||tt| |M16 M16 M16 Mi6 M20 M24/M22 M24/M22 M24/M22 M24/M22 M27 M27 M27 M3 M33/M30 M33/M30|| tt||M33 / M36 8.5 100 120 135 160 188 218 248|| tt||278 302 332 390 148 505 555 610||tt| |2 2 2 2 3 3 3 3 3 3 3 3 3 3 1 法法益 原内任 - 16 18 18 20 22 24 21| |tt||26 28 30 30 32 32 3·1 31| |tt||36 42 48 ! 1 26 33 39||tt ||59 o 135 161 : 196 222 法 耐论 质蟹 ky ().. ,3. 0.0 1.13 1. 2.7 3.2 1.1 G. 8.21 1(0.20) 4.50||tt| |248 17. 27618.90 328 26-60 380 13 181 534 52 34.3.||tt ||.( Hit.y 67.31: Note: The flange connection dimensions of Series 1 in Tables 1 to 3 are different from the national and German flange standard dimensions: Series 2 Dimensions of the original machine standard method: New household product design should give priority to the series! (The theoretical quality of the flange listed in Table 2~Table 5 refers to the series 2 method. Additional instructions: This standard was proposed and managed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry. The main drafters of this standard were Li Junying, Wu Zhenjia, and Zhang Fenglin359 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.