General specifications for packing of mechanical and electrical product
Some standard content:
ICS55.020
National Standard of the People's Republic of China
GB/T13384—2008
Replaces GB/T13384-1992, GB/T15464—1995 General specifications for packing of mechanical and electrical product
General specifications for packing of mechanical and electrical productIssued on 2008-07-18
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
Implemented on 2009-01-01
GB/T13384—2008
This standard replaces GB/T13384—1992 "General technical conditions for packing of mechanical and electrical products" and GB/T15464-1995 "General conditions for packing of instruments and meters".
Compared with GB/T13384--1992 and GB/T15464-1995, this standard has the following major changes: General provisions are changed to basic requirements;
Integrate the relevant contents of packaging methods and protective packaging methods in the two standards; Clarify the reference standards for wood selection and allowable defects in various parts of wood, modify the requirements for wood moisture content, and add requirements for wood fumigation;
Add requirements for reinforcement methods of packaging boxes made of other materials; In the content of protective packaging, the reference standards are clarified and the standard content is simplified; Clarify the reference standards for test items, cancel the specific selected test items, and simplify the standard. This standard is proposed and managed by the National Technical Committee for Packaging Standardization (SAC/TC49). Drafting units of this standard: Shenzhen Meiyingsen Environmental Protection Technology Co., Ltd., General Research Institute of Machinery Science, and China Machinery Productivity Promotion Center. The main drafters of this standard: Huang Xue, Cai Shaoling, Liu Ping, Zhang Xiaojian, and Ren Guang. The previous versions of the standards replaced by this standard are: -GB/T13384—1992;
-GB/T15464—1995.
1 Scope
General technical conditions for packaging of electromechanical products
GB/T13384—2008
This standard specifies the basic requirements, packaging methods and protective packaging methods, technical requirements, test methods, packaging marks and random documents for packaging of mechanical, electrical, instrumentation and other products. This standard applies to the transportation packaging of mechanical, electrical, instrumentation and other products. 2 Normative references
The clauses in the following documents become the clauses of this standard through reference into this standard. For all dated references, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated references, the latest versions shall apply to this standard. GB/T191
GB/T4768
Pictograms for packaging, storage and transportation (GB/T191
Food-proof packaging
2008ISO780:1997.MOD)
GB/T4857 (all parts)
Basic tests for packaging and transport packages
GB/T4879
GB/T4892
Rust-proof packaging
Dimension series of rectangular transport packages of ton weightbzxZ.net
GB/T489 all parts)
Particleboard
GB/T50480 Moisture-proof packaging
GB/T5398Q Test methods for human-shaped transport packages (GB/T5398GB/T6543
G B/T6544
GB/T6980
GB/T7284
GB/T7350
GB/T8166
Single corrugated box and double corrugated frosted paperboard for transport packaging
Corrugated box
Frame fruit box
Waterproof warehouse packaging
Delayed packaging design method
GB/T9846 (all department plywood
GB/T10819
GB/T12464
1999.negASTMD10831991)
Wooden chassis (GB/T108192005, JISZ1405:1984, M0D) Ordinary wooden box (GB/T1246420 02, JIS Z1402: 1999, NEQ) GB/T12626 (all parts)
GB/T13041
GB/T13123
GB/T13144
GB/T16470
GB/T18924
GB/T18925
GB/T18926
3 Basic requirements
Hard fiberboard
Packing container Magnesium concrete box
Bamboo plywood
Packing container Bamboo plywood box
Pallet packaging (GB/T16470-1996.neg MIL-STD147D) Wire strapping box (GB/T18924-2002, JIS B 1407:1989, NEQ) Sliding wooden box (GB/T189252002JISZ1402:1990, MOD) Packaging container: wooden components (GB/T18926-2008, ASTMD6199-2007, NEQ) 3.1 The packaging should meet the requirements of science, economy, firmness, beauty and marketability. In the circulation environment, it should be ensured that the product will not rust, mildew, reduce precision, be damaged or lost due to poor packaging during the agreement period between the supply and demand parties. 1
GB/T13384-—2008
3.2 The packaging design should be carried out according to the product characteristics, circulation environment conditions and customer requirements, so that the packaging is compact, the protection is reasonable, safe and reliable, 3.3 The product must be inspected and qualified, and the protection treatment must be done well before the internal and external packaging can be carried out. The random documents should be complete. 3.4 The external dimensions and quality of the packaging should comply with the relevant regulations on over-limit and overweight in domestic and foreign transportation. The dimensions of rigid rectangular transport packages shall comply with the provisions of GB/T4892.
3.5 The product packaging environment shall be clean, dry and free of harmful media. 4 Packaging methods and protective packaging methods
4.1 The main packaging methods include box packaging (ordinary wooden boxes, sliding wooden boxes, frame wooden boxes, corrugated paper boxes, plywood boxes, fiberboard boxes, calcium plastic boxes, magnesia concrete boxes, bamboo plywood boxes, plastic boxes, calcium plastic corrugated boxes, metal boxes, honeycomb paperboard boxes, etc.), loose packaging, partial packaging, bundled packaging, naked packaging, bag packaging and pallet packaging.
4.2 The main protective packaging methods include: waterproof packaging, moisture-proof packaging, mildew-proof packaging, rust-proof packaging, cushioning packaging, dust-proof packaging and anti-static packaging. Appropriate protective packaging methods should be selected according to product characteristics and storage, transportation and loading and unloading conditions. 5 Technical requirements
5.1 Packaging materials
The selected packaging materials should not cause the surface color of the product to change or rust, nor should the product be damaged due to the deformation of the packaging materials.
5.1.1 Wood
The packaging materials should meet the following requirements!
a) Under the premise of ensuring the strength of the packaging container, according to the requirements of reasonable material use, select appropriate tree species in accordance with the provisions of GB/T18926;
The color of the box board of the same packaging box should be basically the same, the outer surface should be flat, without obvious burrs and insect holes (except for repaired insect holes); b)
c) The allowable defects of each part of the wood shall be in accordance with the provisions of GB/T18926; When making containers, the moisture content of wood is generally not more than 20%, but the moisture content of slides, auxiliary slides, outer box rails, lattice wooden boxes, wooden chassis and d)
pallets can be below 25%; e) When necessary, the wood used should be treated with drugs fumigation or heat treatment to eliminate pests. 5.1.2 Corrugated cardboard
Wallboard for packaging should comply with the provisions of GB/T6544. 5.1.3 Plywood
Plywood for packaging should comply with the provisions of GB/T9846. 5.1.4 Fiberboard
Fiberboard for packaging shall comply with the provisions of GB/T12626. 5.1.5 Particleboard
Particleboard for packaging shall comply with the provisions of GB/T4897. 5.1.6 Magnesium concrete
Magnesium concrete for packaging shall comply with the provisions of GB/T13041. 5.1.7 Calcium plastic corrugated board
Calcium plastic corrugated board for packaging shall comply with the provisions of GB/T6980. 5.1.8 Bamboo plywood
Bamboo plywood for packaging shall comply with the provisions of GB/T13123. 5.1.9 Other materials
Packaging can also use other materials that have been proven to be reliable in performance through tests, or two or more materials can be used. However, no matter what material is used, its strength and performance should be ensured to meet the characteristics of the product and the requirements of the circulation environment. 2
5.2 Case packaging
5.2.1 Case making
5.2.1.1 Wooden cases
GB/T13384—2008
Ordinary wooden cases should comply with the provisions of GB/T12464, sliding wooden cases should comply with the relevant provisions of GB/T18925, frame wooden cases should comply with the provisions of GB/T7284, wire tied cases should comply with the provisions of GB/T18924, and other types of wooden cases such as frame plywood cases, fiberboard cases, particleboard cases, etc. should comply with the provisions of 5.2.1.6. 5.2.1.2 Corrugated paper cases
Corrugated paper cases should comply with the provisions of GB/T6543. 5.2.1.3 Magnesium concrete box
Magnesium concrete box shall comply with the provisions of GB/T13041. 5.2.1.4 Calcium plastic tile box
Calcium plastic corrugated box shall comply with the provisions of GB/T6980. 5.2.1.5 Bamboo plywood box
Bamboo plywood box shall comply with the provisions of GB/T13144. 5.2.1.6 Other material packaging boxes
When other materials are used to make packaging boxes, their structure and production shall be adapted to their materials. The strength of the packaging boxes shall be the same as that of the above packaging boxes and shall pass the tests specified in Chapter 6.
5.2.2 Packing
5.2.2.1 When packing products, their center of gravity should be centered and lower as much as possible. Products with a high center of gravity should be packed horizontally as much as possible. Products with a significantly deviated center of gravity should take appropriate balancing measures. 5.2.2.2 Without affecting the performance of the product, the movable parts of the product should be moved to the position where the product has the smallest external dimensions and fixed. The protruding parts of the product should be removed as much as possible, marked, and packaged separately according to their characteristics. Generally, they should be fixed in the same box.
5.2.2.3 The parts with special requirements on the product should be removed as much as possible, marked, and packaged separately according to special requirements. 5.2.2.4 The product (or inner packaging box) should be securely fixed in the outer packaging box. The fixing method can be cushioning material plugging, wooden block positioning and fastening, bolt fastening, pressure bar fastening, etc. In general, the product (or inner packaging box) should not be in direct contact with the outer packaging box board, and a certain distance should be left between the inner side, inner end and top surface of the outer packaging box. 5.2.2.5 Accessory boxes, spare parts boxes, etc. should be fixed in appropriate positions in the main box as much as possible, and corresponding fixing measures should be taken for the accessories and spare parts installed in the box.
5.2.2.6 The product packaging box should be clean, dry, and free of foreign matter. 5.2.3 Reinforcement
5.2.3.1 After the wooden box is sealed, it should be reinforced according to the provisions of the corresponding wooden box standards. 5.2.3.2 After the carton and calcium plastic box are sealed, plastic strapping tape or oxidized steel strapping tape can be used for strapping when necessary. The width of the plastic strapping tape should not be less than 14mm. When strapping, the plastic strap or steel strap should be tightly tied to the carton, and corresponding measures should be taken to prevent it from cutting into the cardboard and damaging the carton. 5.2.3.3 After the packaging boxes of other materials are sealed, they should be reinforced according to the size of the box type, referring to the provisions of GB/T12464, GB/T18925GB/T7284.
5.2.4 Strength of the packaging box The packaging box should have sufficient strength. According to the quality and characteristics of the packaged product, the relevant test items shall be selected from the test methods and other test items specified in Chapter 6. After the test, there shall be no obvious displacement of the fixed objects in the box, the product appearance, performance, accuracy and relevant technical parameters shall be within the prescribed tolerance range, the packaging box shall have no obvious damage and deformation and shall comply with the provisions and design requirements of the relevant standards. 5.3 Loose packaging
When the material of the chassis of the loose package is wood, it shall comply with the provisions of GB/T10819; when the chassis is made of other materials, it shall be designed, manufactured and packaged according to the characteristics and strength of the material and in accordance with the principles specified in GB/T10819. The product shall be fastened to the chassis to prevent movement during transportation.
GB/T13384—2008
5.4 Bundling and packaging
5.4.1 Bundling and packaging shall be bundles with a weight of no more than 2t and a length of less than or equal to 6m. Each bundle shall have no less than 4 ties. For bundles with a length of more than 6m, each bundle shall have no less than 5 ties. The tying shall be neat and firm. 5.4.2 When bundling pipe fittings, both ends shall be blocked. Appropriate protective measures shall be taken for the threaded parts of the pipe fittings. 5.5 Pallet packaging
Pallet packaging shall comply with the provisions of GB/T16470. 5.6 Protective packaging
5.6.1 Waterproof packaging
Waterproof packaging shall comply with the provisions of GB/T7350. 5.6.2 Moisture-proof packaging
Moisture-proof packaging shall comply with the provisions of GB/T5048. 5.6.3 Anti-rust packaging
Anti-rust packaging shall comply with the provisions of GB/T4879. 5.6.4 Anti-fog packaging
Anti-toxic packaging shall comply with the provisions of GB/T4768. 5.6.5 Cushioning packaging
5.6.5.1 The design method of cushioning packaging may adopt the method specified in GB/T8166. 5.6.5.2 Cushioning materials shall have the characteristics of not being easy to be eaten by insects, not easy to grow berries, and not easy to be deformed by fatigue. Cushioning materials shall be tightly attached (or fastened) between the product (or inner packaging box or box) and the inner wall of the outer packaging box. 5.6.6 Dust-proof packaging
When the product is dust-proof packaged, appropriate dust-proof measures shall be taken, and the dust-prone parts of the product must be wrapped with soft neutral paper or sealed with polyethylene film bags.
6 Test methods
Tests of relevant items in GB/T4857 and relevant items in GB/T5048, GB/T4879 and GB/T5398 should be appropriately selected according to the characteristics and requirements of the package itself and the actual circulation environment conditions. 7 Packaging marks and random documents
7.1 When the product is packed in multiple boxes, the box number should be expressed as a fraction, with the numerator being the box number and the denominator being the total number of boxes. The main box should be box No. 1. 7.2 Packaging storage and transportation indication marks should be correctly selected according to the characteristics of the product and the relevant provisions of GB/T191. Packages with a center of gravity that is obviously off the center should be marked with "lift from here" and "center of gravity". 7.3 Random documents generally include instruction manuals, certificates of conformity, packing lists (including master packing lists and sub-packing lists), etc. When the product is packed in multiple boxes, the instruction manual, certificate of conformity, and master packing list are generally placed in the main box, and the sub-packing lists should be placed in the corresponding packaging boxes. The relevant documents such as the precautions for unpacking can be put into a plastic bag and affixed to the packaging box. Copyright reserved
Book number: 155066·1-33874
GB/T13384-2008
Price:
National standard of the People's Republic of China
General technical conditions for packaging of electromechanical products
GB/T13384—2008
Published and distributed by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal code: 100045
Website: www,spe,net.cn
Tel: 68 52394668517548
Printed by China Standard Press, published by Anhuangdao Printing Factory, and distributed by Xinhua Bookstores in various places
Format 880×1230
First edition in October 2008
Printing sheet 0.5
Word count 9,000 words
First printing in October 2008
Book number: 155066·1-33874 Price 10.00 yuan If there is any printing error
It will be replaced by our distribution center
Copyright exclusive. Infringement will be investigated
Report telephone: (010)685335334 Calcium plastic corrugated boxes
Calcium plastic corrugated boxes shall comply with the provisions of GB/T6980. 5.2.1.5 Bamboo plywood boxes
Bamboo plywood boxes shall comply with the provisions of GB/T13144. 5.2.1.6 Other material packaging boxes
When packaging boxes are made of other materials, their structure and production shall be adapted to their materials. The strength of the packaging boxes shall be the same as that of the above packaging boxes and shall pass the test specified in Chapter 6.
5.2.2 Packing
5.2.2.1 When packing products, their center of gravity shall be centered and lower as much as possible. Products with a high center of gravity shall be packed horizontally as much as possible. Products with a center of gravity that deviates significantly from the center shall take appropriate balancing measures. 5.2.2.2 Without affecting the performance of the product, the movable parts of the product shall be moved to the position where the product has the smallest external dimensions and fixed. Protruding parts on the product should be removed as much as possible, marked, and packaged separately according to their characteristics. Generally, they should be fixed in the same box.
5.2.2.3 Parts on the product with special requirements should be removed as much as possible, marked, and packaged separately according to special requirements. 5.2.2.4 The product (or inner packaging box) should be securely fixed in the outer packaging box. The fixing method can be cushioning material plugging, wooden block positioning and fastening, bolt fastening, pressure bar fastening, etc. Under normal circumstances, the product (or inner packaging box) should not be in direct contact with the outer packaging box board, and a certain distance should be left between the inner side, inner end and top surface of the outer packaging box. 5.2.2.5 Accessory boxes, spare parts boxes, etc. should be fixed in appropriate positions in the main box as much as possible, and the accessories and spare parts installed in the box should also take corresponding fixing measures.
5.2.2.6 The product packaging box should be clean, dry, and free of foreign matter. 5.2.3 Reinforcement
5.2.3.1 After the wooden box is sealed, it shall be reinforced according to the provisions of the corresponding wooden box standard. 5.2.3.2 After the carton and calcium plastic box are sealed, they can be strapped with plastic strapping tape or oxidized steel strapping tape when necessary. The width of the plastic strapping tape should not be less than 14mm. When strapping, the plastic strap or steel strap should be tightly tied to the carton, and appropriate measures should be taken to prevent it from cutting into the cardboard and damaging the carton. 5.2.3.3 After the packaging boxes made of other materials are sealed, they should be reinforced according to the size of the box type, referring to the provisions of GB/T12464, GB/T18925 and GB/T7284.
5.2.4 Strength of the packaging box The packaging box should have sufficient strength. According to the quality and characteristics of the package, the relevant test items are selected from the test methods and other test items specified in Chapter 6. After the test, there is no obvious displacement of the fixed objects in the box, the product appearance, performance, precision and relevant technical parameters should be within the prescribed tolerance range, the packaging box should have no obvious damage and deformation and meet the provisions and design requirements of the relevant standards. 5.3 Loose packaging
When the material of the chassis of the loose package is wood, it shall comply with the provisions of GB/T10819; when the chassis is made of other materials, it shall be designed, manufactured and packaged according to the characteristics and strength of the material and in accordance with the principles of GB/T10819. The product should be fastened to the chassis to prevent movement during transportation.
GB/T13384—2008
5.4 Bundled packaging
5.4.1 Bundled packages are bundles with a weight of no more than 2t and a length of less than or equal to 6m. The number of tying paths per bundle shall not be less than 4. For bundles with a length of more than 6m, the number of tying paths per bundle shall not be less than 5. The tying should be neat and firm. 5.4.2 When bundling pipes, both ends should be blocked. Corresponding protective measures should be taken for the threaded parts of pipes. 5.5 Pallet packaging
Pallet packaging should comply with the provisions of GB/T16470. 5.6 Protective packaging
5.6.1 Waterproof packaging
Waterproof packaging should comply with the provisions of GB/T7350. 5.6.2 Moisture-proof packaging
Moisture-proof packaging should comply with the provisions of GB/T5048. 5.6.3 Rust-proof packaging
Rust-proof packaging should comply with the provisions of GB/T4879. 5.6.4 Anti-fog packaging
Anti-toxic packaging should comply with the provisions of GB/T4768. 5.6.5 Cushioning packaging
5.6.5.1 The design method of cushioning packaging can adopt the method specified in GB/T8166. 5.6.5.2 Cushioning materials should have the characteristics of not being easy to be eaten by insects, not being easy to grow berries, and not being easy to deform due to fatigue. The cushioning material should be closely attached (or fastened) between the product (or inner packaging box, box) and the inner wall of the outer packaging box. 5.6.6 Dust-proof packaging
Appropriate dust-proof measures should be taken when the product is dust-proof packaged. The dust-prone parts of the product must be wrapped with soft neutral paper or sealed with polyethylene film bags.
6 Test methods
According to the characteristics and requirements of the packaging itself and the actual circulation environment conditions, the tests of the relevant items in GB/T4857 and the tests of the relevant items in GB/T5048, GB/T4879 and GB/T5398 should be appropriately selected. 7 Packaging marks and random documents
7.1 When the product is packaged in multiple boxes, the box number should be expressed as a fraction, with the numerator being the box number and the denominator being the total number of boxes. The main box should be box No. 1. 7.2 The packaging storage and transportation indication marks should be correctly selected according to the characteristics of the product and the relevant provisions of GB/T191. Packages whose center of gravity is obviously off the center should be marked with "Lift from here" and "center of gravity". 7.3 Random documents generally include instruction manual, certificate of conformity, packing list (including master packing list and sub-packing list), etc. When the product is packed in multiple boxes, the instruction manual, certificate of conformity, master packing list are generally placed in the main box, and the sub-packing list should be placed in the corresponding packaging box. Documents such as packaging and unpacking precautions can be placed in a plastic bag and pasted on the packaging box. All rights reserved.
Book number: 155066·1-33874
GB/T13384-2008
Price:
National standard of the People's Republic of China
General technical conditions for packaging of electromechanical products
GB/T13384—2008
Published and distributed by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal code: 100045
Website: www,spe,net.cn
Tel: 68 52394668517548
Printed by China Standard Press, published by Anhuangdao Printing Factory, and distributed by Xinhua Bookstores in various places
Format 880×1230
First edition in October 2008
Printing sheet 0.5
Word count 9,000 words
First printing in October 2008
Book number: 155066·1-33874 Price 10.00 yuan If there is any printing error
It will be replaced by our distribution center
Copyright exclusive. Infringement will be investigated
Report telephone: (010)685335334 Calcium plastic corrugated boxes
Calcium plastic corrugated boxes shall comply with the provisions of GB/T6980. 5.2.1.5 Bamboo plywood boxes
Bamboo plywood boxes shall comply with the provisions of GB/T13144. 5.2.1.6 Other material packaging boxes
When packaging boxes are made of other materials, their structure and production shall be adapted to their materials. The strength of the packaging boxes shall be the same as that of the above packaging boxes and shall pass the test specified in Chapter 6.
5.2.2 Packing
5.2.2.1 When packing products, their center of gravity shall be centered and lower as much as possible. Products with a high center of gravity shall be packed horizontally as much as possible. Products with a center of gravity that deviates significantly from the center shall take appropriate balancing measures. 5.2.2.2 Without affecting the performance of the product, the movable parts of the product shall be moved to the position where the product has the smallest external dimensions and fixed. Protruding parts on the product should be removed as much as possible, marked, and packaged separately according to their characteristics. Generally, they should be fixed in the same box.
5.2.2.3 Parts on the product with special requirements should be removed as much as possible, marked, and packaged separately according to special requirements. 5.2.2.4 The product (or inner packaging box) should be securely fixed in the outer packaging box. The fixing method can be cushioning material plugging, wooden block positioning and fastening, bolt fastening, pressure bar fastening, etc. Under normal circumstances, the product (or inner packaging box) should not be in direct contact with the outer packaging box board, and a certain distance should be left between the inner side, inner end and top surface of the outer packaging box. 5.2.2.5 Accessory boxes, spare parts boxes, etc. should be fixed in appropriate positions in the main box as much as possible, and the accessories and spare parts installed in the box should also take corresponding fixing measures.
5.2.2.6 The product packaging box should be clean, dry, and free of foreign matter. 5.2.3 Reinforcement
5.2.3.1 After the wooden box is sealed, it shall be reinforced according to the provisions of the corresponding wooden box standard. 5.2.3.2 After the carton and calcium plastic box are sealed, they can be strapped with plastic strapping tape or oxidized steel strapping tape when necessary. The width of the plastic strapping tape should not be less than 14mm. When strapping, the plastic strap or steel strap should be tightly tied to the carton, and appropriate measures should be taken to prevent it from cutting into the cardboard and damaging the carton. 5.2.3.3 After the packaging boxes made of other materials are sealed, they should be reinforced according to the size of the box type, referring to the provisions of GB/T12464, GB/T18925 and GB/T7284.
5.2.4 Strength of the packaging box The packaging box should have sufficient strength. According to the quality and characteristics of the package, the relevant test items are selected from the test methods and other test items specified in Chapter 6. After the test, there is no obvious displacement of the fixed objects in the box, the product appearance, performance, precision and relevant technical parameters should be within the prescribed tolerance range, the packaging box should have no obvious damage and deformation and meet the provisions and design requirements of the relevant standards. 5.3 Loose packaging
When the material of the chassis of the loose package is wood, it shall comply with the provisions of GB/T10819; when the chassis is made of other materials, it shall be designed, manufactured and packaged according to the characteristics and strength of the material and in accordance with the principles of GB/T10819. The product should be fastened to the chassis to prevent movement during transportation.
GB/T13384—2008
5.4 Bundled packaging
5.4.1 Bundled packages are bundles with a weight of no more than 2t and a length of less than or equal to 6m. The number of tying paths per bundle shall not be less than 4. For bundles with a length of more than 6m, the number of tying paths per bundle shall not be less than 5. The tying should be neat and firm. 5.4.2 When bundling pipes, both ends should be blocked. Corresponding protective measures should be taken for the threaded parts of pipes. 5.5 Pallet packaging
Pallet packaging should comply with the provisions of GB/T16470. 5.6 Protective packaging
5.6.1 Waterproof packaging
Waterproof packaging should comply with the provisions of GB/T7350. 5.6.2 Moisture-proof packaging
Moisture-proof packaging should comply with the provisions of GB/T5048. 5.6.3 Rust-proof packaging
Rust-proof packaging should comply with the provisions of GB/T4879. 5.6.4 Anti-fog packaging
Anti-toxic packaging should comply with the provisions of GB/T4768. 5.6.5 Cushioning packaging
5.6.5.1 The design method of cushioning packaging can adopt the method specified in GB/T8166. 5.6.5.2 Cushioning materials should have the characteristics of not being easy to be eaten by insects, not being easy to grow berries, and not being easy to deform due to fatigue. The cushioning material should be closely attached (or fastened) between the product (or inner packaging box, box) and the inner wall of the outer packaging box. 5.6.6 Dust-proof packaging
Appropriate dust-proof measures should be taken when the product is dust-proof packaged. The dust-prone parts of the product must be wrapped with soft neutral paper or sealed with polyethylene film bags.
6 Test methods
According to the characteristics and requirements of the packaging itself and the actual circulation environment conditions, the tests of the relevant items in GB/T4857 and the tests of the relevant items in GB/T5048, GB/T4879 and GB/T5398 should be appropriately selected. 7 Packaging marks and random documents
7.1 When the product is packaged in multiple boxes, the box number should be expressed as a fraction, with the numerator being the box number and the denominator being the total number of boxes. The main box should be box No. 1. 7.2 The packaging storage and transportation indication marks should be correctly selected according to the characteristics of the product and the relevant provisions of GB/T191. Packages whose center of gravity is obviously off the center should be marked with "Lift from here" and "center of gravity". 7.3 Random documents generally include instruction manual, certificate of conformity, packing list (including master packing list and sub-packing list), etc. When the product is packed in multiple boxes, the instruction manual, certificate of conformity, master packing list are generally placed in the main box, and the sub-packing list should be placed in the corresponding packaging box. Documents such as packaging and unpacking precautions can be placed in a plastic bag and pasted on the packaging box. All rights reserved.
Book number: 155066·1-33874
GB/T13384-2008
Price:
National standard of the People's Republic of China
General technical conditions for packaging of electromechanical products
GB/T13384—2008
Published and distributed by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal code: 100045
Website: www,spe,net.cn
Tel: 68 52394668517548
Printed by China Standard Press, published by Anhuangdao Printing Factory, and distributed by Xinhua Bookstores in various places
Format 880×1230
First edition in October 2008
Printing sheet 0.5
Word count 9,000 words
First printing in October 2008
Book number: 155066·1-33874 Price 10.00 yuan If there is any printing error
It will be replaced by our distribution center
Copyright exclusive. Infringement will be investigated
Report telephone: (010)685335332 After the cartons and calcium plastic boxes are sealed, they can be strapped with plastic strapping tape or oxidized steel strapping tape when necessary. The width of the plastic strapping tape should not be less than 14mm. When strapping, the plastic strap or steel strap should be tightly tied to the cartons, and appropriate measures should be taken to prevent it from cutting into the cardboard and damaging the cartons. 5.2.3.3 After the packaging boxes of other materials are sealed, they should be reinforced according to the size of the box type and refer to the provisions of GB/T12464, GB/T18925GB/T7284.
5.2.4 Strength of the packaging box The packaging box should have sufficient strength. According to the quality and characteristics of the packaged items, the relevant test items are selected from the test methods and other test items specified in Chapter 6. After the test, there is no obvious displacement of the fixed objects in the box, the product appearance, performance, accuracy and relevant technical parameters should be within the specified allowable tolerance range, and the packaging box should have no obvious damage and deformation and meet the provisions and design requirements of the relevant standards. 5.3 Loose packaging
When the chassis of loose packaging is made of wood, it shall comply with the provisions of GB/T10819; when the chassis is made of other materials, it shall be designed, manufactured and packaged according to the characteristics and strength of the material and in accordance with the principles of GB/T10819. The product shall be fastened to the chassis to prevent movement during transportation.
GB/T13384—2008
5.4 Bundled packaging
5.4.1 Bundled packaging is a bundled package with a weight of no more than 2t and a length of less than or equal to 6m. The number of bundles per bundle shall not be less than 4, and the number of bundles per bundle with a length of more than 6m shall not be less than 5. The bundles shall be neat and firm. 5.4.2 When bundling pipe fittings, both ends shall be blocked. Appropriate protective measures shall be taken for the threaded parts of the pipe fittings. 5.5 Pallet packaging
Pallet packaging shall comply with the provisions of GB/T16470. 5.6 Protective packaging
5.6.1 Waterproof packaging
Waterproof packaging shall comply with the provisions of GB/T7350. 5.6.2 Moisture-proof packaging
Moisture-proof packaging shall comply with the provisions of GB/T5048. 5.6.3 Anti-rust packaging
Anti-rust packaging shall comply with the provisions of GB/T4879. 5.6.4 Anti-fog packaging
Anti-toxic packaging shall comply with the provisions of GB/T4768. 5.6.5 Cushioning packaging
5.6.5.1 The design method of cushioning packaging can adopt the method specified in GB/T8166. 5.6.5.2 Cushioning materials shall have the characteristics of not being easy to be eaten by insects, not being easy to grow berries, and not being easy to deform due to fatigue. Cushioning materials shall be closely attached (or fastened) between the product (or inner packaging box, box) and the inner wall of the outer packaging box. 5.6.6 Dust-proof packaging
Appropriate dust-proof measures should be taken when the product is packaged in dust-proof packaging. The dust-prone parts of the product must be wrapped with soft neutral paper or sealed with polyethylene film bags.
6 Test methods
According to the characteristics and requirements of the package itself and the actual circulation environment conditions, the tests of the relevant items in GB/T4857 and the tests of the relevant items in GB/T5048, GB/T4879 and GB/T5398 should be appropriately selected. 7 Packaging marks and random documents
7.1 When the product is packaged in multiple boxes, the box number should be expressed as a fraction, with the numerator being the box number and the denominator being the total number of boxes. The main box should be box No. 1. 7.2 The packaging storage and transportation indication marks should be correctly selected according to the characteristics of the product and the relevant provisions of GB/T191. Packages with a center of gravity that is obviously off the center should be marked with the "lift from here" and "center of gravity" marks. 7.3 The accompanying documents generally include instruction manual, certificate of conformity, packing list (including master packing list and sub-packing list), etc. When the product is packed in multiple boxes, the instruction manual, certificate of conformity, master packing list are generally placed in the main box, and the sub-packing list should be placed in the corresponding packing box. The documents related to the packing and unpacking precautions can be put in a plastic bag and affixed to the packing box. All rights reserved.
Book number: 155066·1-33874
GB/T13384-2008
Price:
National standard of the People's Republic of China
General technical conditions for packaging of electromechanical products
GB/T13384—2008
Published and distributed by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal code: 100045
Website: www,spe,net.cn
Tel: 68 52394668517548
Printed by China Standard Press, published by Anhuangdao Printing Factory, and distributed by Xinhua Bookstores in various places
Format 880×1230
First edition in October 2008
Printing sheet 0.5
Word count 9,000 words
First printing in October 2008
Book number: 155066·1-33874 Price 10.00 yuan If there is any printing error
It will be replaced by our distribution center
Copyright exclusive. Infringement will be investigated
Report telephone: (010)685335332 After the cartons and calcium plastic boxes are sealed, they can be strapped with plastic strapping tape or oxidized steel strapping tape when necessary. The width of the plastic strapping tape should not be less than 14mm. When strapping, the plastic strap or steel strap should be tightly tied to the cartons, and appropriate measures should be taken to prevent it from cutting into the cardboard and damaging the cartons. 5.2.3.3 After the packaging boxes of other materials are sealed, they should be reinforced according to the size of the box type and refer to the provisions of GB/T12464, GB/T18925GB/T7284.
5.2.4 Strength of the packaging box The packaging box should have sufficient strength. According to the quality and characteristics of the packaged items, the relevant test items are selected from the test methods and other test items specified in Chapter 6. After the test, there is no obvious displacement of the fixed objects in the box, the product appearance, performance, accuracy and relevant technical parameters should be within the specified allowable tolerance range, and the packaging box should have no obvious damage and deformation and meet the provisions and design requirements of the relevant standards. 5.3 Loose packaging
When the chassis of loose packaging is made of wood, it shall comply with the provisions of GB/T10819; when the chassis is made of other materials, it shall be designed, manufactured and packaged according to the characteristics and strength of the material and in accordance with the principles of GB/T10819. The product shall be fastened to the chassis to prevent movement during transportation.
GB/T13384—2008
5.4 Bundled packaging
5.4.1 Bundled packaging is a bundled package with a weight of no more than 2t and a length of less than or equal to 6m. The number of bundles per bundle shall not be less than 4, and the number of bundles per bundle with a length of more than 6m shall not be less than 5. The bundles shall be neat and firm. 5.4.2 When bundling pipe fittings, both ends shall be blocked. Appropriate protective measures shall be taken for the threaded parts of the pipe fittings. 5.5 Pallet packaging
Pallet packaging shall comply with the provisions of GB/T16470. 5.6 Protective packaging
5.6.1 Waterproof packaging
Waterproof packaging shall comply with the provisions of GB/T7350. 5.6.2 Moisture-proof packaging
Moisture-proof packaging shall comply with the provisions of GB/T5048. 5.6.3 Anti-rust packaging
Anti-rust packaging shall comply with the provisions of GB/T4879. 5.6.4 Anti-fog packaging
Anti-toxic packaging shall comply with the provisions of GB/T4768. 5.6.5 Cushioning packaging
5.6.5.1 The design method of cushioning packaging can adopt the method specified in GB/T8166. 5.6.5.2 Cushioning materials shall have the characteristics of not being easy to be eaten by insects, not being easy to grow berries, and not being easy to deform due to fatigue. Cushioning materials shall be closely attached (or fastened) between the product (or inner packaging box, box) and the inner wall of the outer packaging box. 5.6.6 Dust-proof packaging
Appropriate dust-proof measures should be taken when the product is packaged in dust-proof packaging. The dust-prone parts of the product must be wrapped with soft neutral paper or sealed with polyethylene film bags.
6 Test methods
According to the characteristics and requirements of the package itself and the actual circulation environment conditions, the tests of the relevant items in GB/T4857 and the tests of the relevant items in GB/T5048, GB/T4879 and GB/T5398 should be appropriately selected. 7 Packaging marks and random documents
7.1 When the product is packaged in multiple boxes, the box number should be expressed as a fraction, with the numerator being the box number and the denominator being the total number of boxes. The main box should be box No. 1. 7.2 The packaging storage and transportation indication marks should be correctly selected according to the characteristics of the product and the relevant provisions of GB/T191. Packages with a center of gravity that is obviously off the center should be marked with the "lift from here" and "center of gravity" marks. 7.3 The accompanying documents generally include instruction manual, certificate of conformity, packing list (including master packing list and sub-packing list), etc. When the product is packed in multiple boxes, the instruction manual, certificate of conformity, master packing list are generally placed in the main box, and the sub-packing list should be placed in the corresponding packing box. The documents related to the packing and unpacking precautions can be put in a plastic bag and affixed to the packing box. All rights reserved.
Book number: 155066·1-33874
GB/T13384-2008
Price:
National standard of the People's Republic of China
General technical conditions for packaging of electromechanical products
GB/T13384—2008
Published and distributed by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal code: 100045
Website: www,spe,net.cn
Tel: 68 52394668517548
Printed by China Standard Press, published by Anhuangdao Printing Factory, and distributed by Xinhua Bookstores in various places
Format 880×1230
First edition in October 2008
Printing sheet 0.5
Word count 9,000 words
First printing in October 2008
Book number: 155066·1-33874 Price 10.00 yuan If there is any printing error
It will be replaced by our distribution center
Copyright exclusive. Infringement will be investigated
Report telephone: (010)685335333. The accompanying documents generally include instruction manual, certificate of conformity, packing list (including master packing list and sub-packing list), etc. When the product is packed in multiple boxes, the instruction manual, certificate of conformity, master packing list are generally placed in the main box, and the sub-packing list should be placed in the corresponding packing box. The documents such as the precautions for unpacking can be put in a plastic bag and affixed to the packing box. All rights reserved.
Book number: 155066·1-33874
GB/T13384-2008
Price:
National standard of the People's Republic of China
General technical conditions for packaging of electromechanical products
GB/T13384—2008
Published and distributed by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal code: 100045
Website: www,spe,net.cn
Tel: 68 52394668517548
Printed by China Standard Press, published by Anhuangdao Printing Factory, and distributed by Xinhua Bookstores in various places
Format 880×1230
First edition in October 2008
Printing sheet 0.5
Word count 9,000 words
First printing in October 2008
Book number: 155066·1-33874 Price 10.00 yuan If there is any printing error
It will be replaced by our distribution center
Copyright exclusive. Infringement will be investigated
Report telephone: (010)685335333. The accompanying documents generally include instruction manual, certificate of conformity, packing list (including master packing list and sub-packing list), etc. When the product is packed in multiple boxes, the instruction manual, certificate of conformity, master packing list are generally placed in the main box, and the sub-packing list should be placed in the corresponding packing box. The documents such as the precautions for unpacking can be put in a plastic bag and affixed to the packing box. All rights reserved.
Book number: 155066·1-33874
GB/T13384-2008
Price:
National standard of the People's Republic of China
General technical conditions for packaging of electromechanical products
GB/T13384—2008
Published and distributed by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal code: 100045
Website: www,spe,net.cn
Tel: 68 52394668517548
Printed by China Standard Press, published by Anhuangdao Printing Factory, and distributed by Xinhua Bookstores in various places
Format 880×1230
First edition in October 2008
Printing sheet 0.5
Word count 9,000 words
First printing in October 2008
Book number: 155066·1-33874 Price 10.00 yuan If there is any printing error
It will be replaced by our distribution center
Copyright exclusive. Infringement will be investigated
Report telephone: (010)68533533
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.