GB/T 9185-2003 Specification for photographers 135 films and cassettes
Some standard content:
CB/T 9185—2003/1S01C07,2000 This standard replaces IS1U2J30 photography 135 specifications (12135-1S96135 specifications film and cassette specifications 3 etc., the official version is TS01C7:1S, this international standard has been replaced by IS)[007,2007, and has important features. This standard 1S01007:2000
To facilitate identification, this standard has made the following retrospective changes: 》This standard is an international standard. 》The decimal point "" is used instead of the integer number. 》The international standard is changed to the "Foreword" of this standard. 》The introduction of the year of the standard is changed to the introduction specified in 1.2. Compared with its predecessor, this standard has the following changes: a) For the purpose of industry use, this standard does not have the following changes in the text: b) For the purpose of industry use, this standard does not have the following changes in the text: The estimation of the information is correct, and the meaning of this version is confirmed by the technical adjustment: we have added a single-channel bar code standard, and the bar code of the United States is limited to the number of yuan (the six sections of the clothing 1 private drama 1 are shown in the figure):
non-double-width bar code system, the original encoding table of Shenzhen people's large width number 86A, the 1995 version of the table 5c
"The width of the bar code is changed to allow a single width that is narrower than the previous standard width"! Technical quality table 1 and figure The 19th edition of the table and diagram
Youyi inkjet box recording system. The film length is evenly added ((bit) back 1 bit also has competition: full of more flexibility (this version of the new table 9, 9% of the general 8.3 and table 9)
's camera automatically transmits the area of the electrocardiogram about the measurement, moved to Appendix B (this version of Appendix B in 3.3.36 version 0.3 and recorded in .3
's guard has been greatly improved, adding a new method of determining the next trap This edition is a revision of the 4.1996 edition of the French Standard. Appendix g
: The rate of calculation of the total film production margin is based on the content of the AA version.
This standard shows A as the standard production record, and Appendix B and Appendix C are the material properties records. This standard is issued by the National Standardization Technical Committee of the China Association of Chemical Industry. The drafting unit of this standard is China Lexian Rubber Group Co., Ltd. The main drafter is Yan Bei.||tt ||This standard replaces the environmental standard of the history of the beverage service. The source of the film released is--GH/T91851983,GH/T91851996,1 Scope
This standard stipulates as follows:
The length of the film:
Tower film frame reduction!
(A/T9185-2003/TSO1057:200C
Photographic 135 specification film and dark box
-The same low-definition film production DX code Novofilm The laser barcode is used for the size of the film dark box: the barcode can be recognized by the laser scanner and the photo scanning machine can automatically transmit the test area. It provides an electronic camera that can talk about the film brightness, and can be used to infer the number of frames. The information board can be displayed on the back of the camera through the design of the cavity. The product mark, sensitivity and consumption are the most important:
Film resistance specification: ||tt| |…Film---The standard also uses the specification
This standard is used for the "35. film" for the 135 double-potential sound basin, and is also used for the box that can be used for recording. At the same time, it is not suitable for the 15-specification film and the box that can be used for the single-time payment machine. 2 Normative referenced documents
The following documents shall become the provisions of this standard through the reference of this standard: All the referenced documents of the Jiangkou period shall not be subject to the amendments (corrections) or collection of the sixteen standards, however, it is necessary to study whether the new version of this document can be processed based on the requirements of the parties involved in the maintenance and coordination of this standard. It is not a non-Chuan period of the introduction of the month design, the city of the new version of the car used in this standard 31: 27 industrial length European standard standard [S554: 1976 state adjustment book section and or test standard is not the standard, the current standard 3 terms and definitions || tt || the following terms and definitions apply to this standard. Several terms (such as film head, film tongue: in the wood standard mountain. The text of the tenth transfer home meaning, 3. 1
135 specification 135-slze
with mm night epidemic film specification name you, in the fast two decisive heat into the standard pursuit long well person 15 heat grid when the expansion of the special look forward.
target size almdimenslon
ten production parts as the day standard or the Uber scale in 3.3
ha1rnle
half a line of rectangular bars and the study of the embrace, they are together with the special deep line number to indicate the period of single safety: Note 1: the complexity and cross-sleeping ability of the study of the British machine state of the exclusion Item shape test, Note: with related and specified documents, GB/T9185-2003/1SO1G07:20003.4
basic dimension
used to indicate the numerical value of the shape, direction or position of a part or surface: it is the tolerance of other dimensions, variations or components in the specification, etc., 3.5
color negative film processing technology
teuluur-uugutire proxes
is used to convert the latent image age in the film of the special production color film into the chemical process of the film. For example, C-1-, CX-.6, etc.
describes the requirements of the system for converting the 135 specification film and the box information of the camera and the system. Note: It includes the camera automatic sensor history, commercial image bar code, training scene code and box information, label, 3. 7
Fx code Dxnunher
Two parts are used to identify the 1:5 current format products. The first part is called the photosensitive product (1M is allocated to the product), the Ministry of Optics is allocated to each product 3.8
Ray light tolerance espaaelaliude
The result is that the film is also the effect of the material. The material is gradually increased by the amount of - barrier fiber system or rate of resin) on the self-removal of the photosensitive resin cavity (emulsion) It can produce a certain image after the chemical reaction process after Kangguang 3.10
Film sensitivity [ilm >pced
a quantitative expression of the ability of a film to withstand the specific conditions of exposure, processing, image density and analysis. 3.11
magazine
a film not exposed to light, made of a metal screen and designed to fit the camera. 3.12
film perforations
a series of defined dimensions for transporting and positioning the film within the film. 3.13
a spindle gpoo!
a pin or mandrel is placed at the end of the film and has a pin or mandrel to pull it toward its end, with the film on the work surface or roll. 3.12
tolerances
a minimum limit on the size of the product consistent with this standard. Note: When "-" is indicated in the specification, the dimensions are standard and the measurement conditions are based on the specifications of this standard (unless otherwise specified). They are measured under the relative atmospheric conditions of 123-250° and 150-150° respectively. 2
GB/T9185—2003/T5Q1007;20D0
All measurements shall be carried out at 1501 under the conditions of 20°C and 5% humidity. 5 Film cutting and punching dimensions
5.1 Film dimensions
The dimensions of the film shall conform to the specifications in Figures 2 and 3 and the analysis tables of the figures. The dimensions G in Figures 2 and 3 are staggered side-by-side pairs of holes. These dimensions are used for cutting and will change over time. 5.11 Film header
The length of the film head (1 + 1) is the same as that of the full-frame film head, including the tongue, when used as a camera roll and to reduce the noise caused by the expansion. Film production can use the film part of the film that is exposed by the dark box to achieve the average reading. 5.1.2 Film tongue
The tongue foot is separated from the head by a small width and the length is changed to the shape of the film in the camera. The shape of the film end corners is shown in Figure 1h) and the table shows the inner and outer corners of the circle. These should not have steps or cutouts. The cutting line should not have a step of more than 1.3 1mr.
5. 1.3 Film display room director: When the cavity film is pulled out from the dark plate, the total teaching element is all concave to the non-surface film part of the B base. The film should be fully aware of the film composition to ensure that the film can be grasped and placed in the middle of the table 1 F35 Specifications film and full-image logo size [around 1] small
1145,97
unit is difficult meter
now juice 1
see note:
now a
W note 5
see juice F
see note i
period certificate 13
GB/19185—2003/ISO1C07.2000
Note 1, size: measurement standard step full use 1 see abandoned F single table 1 (thread)
level is millimeter
Lo unit
Note 13
Note 2 from the first designated full shoot creation a designated full smooth number, 7 of 129 years to push the size given by the user. But in this international recognition needs to be standardized.
Note 31 from the effect after a pull set full true beat state H base tube surface fan high note 4, with the film end to the double full production part of the first hole before the fan high, note, tongue find from the end with the stroke, the rest of the state is the stop intention of the society: sex from the accompanying plate ten complete stretch out to, from which to come more basic and the cavity film of the most central total things, let the stop time
society"! and, with the selection of travel service horse, including the quiet area. Y in the thousand traces of the number brother flash disease system is not busy regulations, society The whole composition is half. It is the basic scale.
is destined to be the center of the number of the heart consultation,
note 11, forget to be a positive number
count 12, is the clock to improve the effect of the data tracking or the same ~ to the single child Lu light of the unexposed light of the perfect quality, in order to improve the efficiency of the bar code reading mountain, the dirt road in any, the bar of the virtual benefit of the god with the center of the calculation point of the teaching of the recent internal sharing, the value of the amplitude! Or more, the center line crown and the effect The study is calculated as an individual (see 1).
Station construction Si Keyang
Book two pictures 12.20.2436
(love the lead of the fixed position ... n
OCOC300oC:30c00:30
Figure 1135 Specification film and latent image bar code
h The surrounding area is
-area (both sides)
Change the strip
Undetermined position
Xu Xixing one
Hundred frame number mark
GB/T9185—2003/ISO1C07.2000
d0 20800
its type of gain
0008809000020080008
) contention position four and direction
technical specified price
Lai Shangfen
Part 2
208181+1310H5
unspecified ratio
Mei Ce Township
Hui Liantong
time kind of road
1) with stop selection again trap modification road code|| tt||Figure 1 (
G8/19185-233/1503007,2000
R) Welcome the year code day ten
letter number identification
: Selected method code
Film support request time business film (see table, the most beautiful and your home image 2 thank you for the most certain,
1 pit)
Table 2135 Specifications Film cutting and punching size (ghost figure 2) Comprehensive tolerance
44. 9=3. 11
Representative years given the end of the appropriate heart volume in... a heart in the length of the continuous.
0900OOOO00
2135 Standard film thickness 2)
2,. 25=41.03
2. 3c=1. 3
2. x+. 15
. Nominal
Unit
6 Full frame numbering
Figure 1e shows the two frame sequences and their difference from GB/19185-2003/1S01007:2000
The first one is located near the C standard 1 see Figure 3> model film, its format half frame series <,4,2,2A36,36.42 abbreviation, the numbers are increased by the spacing between the four holes.
The second generation can be set on the film world of the first group. If there is a second group, it can be a full-frame series (1, 2...3, with a hole spacing item added or as part of an optional single-channel video frame number barcode (see, search), and can be connected to a half-frame series (1, 1.4, 22.4, etc.> Abstract 5.
People talk about the main network review river
7 Latent image barcode
7.1 General
Figure 3135 shows the box barcode (see Table 8)
The shadow bar should be transmitted to the position and size specified in Table 1. Use a system (witness record) to identify the manufacturer, the type of film, the variable double-channel replacement system, the film edge, and the film process each full-frame and half-frame number adjacent, if the color negative film is processed, the bar code is only visible after processing, when the processed film and the film code are combined and the automatic printing is used, each specific film thus identified GB/T91852003/ISO 1C07:2000
The color prints produced can be optimized.
Image number recognition can also be used without delay. One method is to expand the basic 23-bit double channel barcode by adding two digits to the image number recognition pattern. One method is to print a 13-digit single barcode on the opposite edge of the front film. In addition to the color negative film processing technology used in the 13-digit double channel barcode, the 13-digit single barcode is also improved. 7.2 Double channel latent image barcode
Each latent image barcode has a number channel and a clock channel. Each card has the same average number unit (2% of the digits are not, 31 try the right hand code!), each service unit represents a Digital binary, sleep light unit (bar! less than! bit, empty light unit) represents) military position. Cat input Yao external see 7.2.1.1
7.2.1 Data description
The first principle of the letter editor number is a special 1>X standard identification (related"TX again allocated letter good Ke Appendix A): [The code has two parts (the first part and the third part), which are combined to identify the product. If there is a first part, the second part cannot be encoded. The first part is described in 1.3.1,2, and the second part is specified in 7.2.1.111. The first principle of the letter editor data is to be explained in the following: 7.2.1.1 Input model The format
also uses an S-bit start pattern to detect the start of the code sequence through the bar code reader. The last bit of the start pattern is equal to a technical noise unit (cross)
7.2., the first part of the 2X code
DX has 7 bits. These 7 digits from 7 to 13 are assigned to the product according to the sequence specified in the record A! The first part of the X code is encoded. The positions of the bursts and bursts of the 12-bit DX part are listed in the table for convenience. They are arranged in ascending order. The seven unit positions in the table indicate the uninterrupted burst (space: the word indicates the burst (bar). For example, , Part 1 X code 1. The light year element in position 7, 9, 11 and 12 (blank) and the light unit in position 8, .3 and 1 (bar) combination,
the photosensitive factory can use the special abbreviation of Part 1 to identify the film of the same chemical processing without design, 7.2.1.3 Unspecified position
Unspecified position in position [4, should be six gland light year element (some, 7.2.1.4 DX code part 2 identification line bzxZ.net
X can be the second part of the identification of 4 digits, starting from the 15th year, 18 beans, this 1 digit% line should be in accordance with the order specified in the attached purchase of the product specific DX code part 2 coding (table provisions. As the second part of DX, the (in Table 4 represents a light unit (space). The 16 possible combinations of this line should be binary stream codes, with the number of bits 1> representing the largest binary bit, and the number of bits should be 18 in the minimum binary system
7.2.1.5. Page number identification line
These 7 digits can be mixed in the full and half picture code according to the specified format in Table 5. The 19th digit represents the 7-digit binary digit of the page number, and the 25th digit represents the smallest binary digit. The second ball system of the second frame must be obtained by
the number of digits in the half-frame light code in those rows of the dragon palm light, which is the half root \ mark "in the double-coded row of the second frame of the second frame of the 25 yuan light, this yuan is called the flag mark "tube scene about 15 standard cavity volume length after the frame, the small number greater than 36A is given in case these mathematics are needed in the future,
7.2.1.6, the second unspecified position
fork has the second unspecified position 26 when it contains the best progress number row, the second unspecified position is not enough to expose the single (.
7.2.1.7 parity check position
GA/19185-2003/1S01007:2000 In order to make the number of 7 to 18 bits effective as a number, in the position One hundred bands need to check the position! From the number of full bits 7 to the noise unit bar]. The total number of even bits on the quotient 1 should be even?. The double channel number system that can be sent: the odd inertia bit makes the number containing the number 7 to 25 as the odd number. It is about the position 27 of the positioning scale. This part of the examination must be part of the positioning scale. Because it is the total price of the room, it has no effect on the oddness of the case. 7.2.1.8 Output mode
As shown in Figure 1, the output mode of the 4-bit box is used. It uses the constraint of the concave code column to read the case through the killing code. 7.2.2 Clock operation
If the data channel does not include the optional frame number continuation code, the busy channel should contain 3 digits. If the data includes the optional frame and code, the time channel should contain 3! digits. The density of each channel is the fixed position of the data bit and the bit in the data channel. See 1
7.2.3 Quiet zone
The barcode should have a barcode at both ends, as shown in the figure and table.
7.3 Single-channel full-image frame number barcode
Optional single-channel full-image frame number barcode has seven recording units and six space units alternately arranged. The bars and columns are either wide or narrow. Each unit represents a valid binary digit. The wide unit represents a 1 bit and the narrow unit represents a 0 bit. 3.1 Data mode description
7.3.1.1 Input mode
The input mode is a combination of a long wide recording followed by a narrow space. It is used to detect the code word sequence by the barcode reader. 7.3.1.2 Frame number sequence
The frame number sequence consists of a number of stripe elements and a number of space units alternately arranged. In each valid The frame number sequence has 13 wide units (binary bar code> and large case units: and the pattern of the valid frame number sequence is given in Table 6. The digits in these digits represent 1 digit (fill unit). One (-) represents 0 digit (aligned unit).
After the full bar sequence is a full-length space, an optional roll sequence (frame number E in 6) is specified.
For films that can take 12, 2 and 24 photos, the full frame number of each sequence is specified to indicate the full frame number at the end of the roll. These alternate digits are marked with an asterisk "total" in Table 6. 7.3.1.3 Output mode
The output mode starts with a space followed by a narrow bar. The following is used by the bar code reader to detect the end of the code sequence. 7.3.2 Quiet Zone
There should be quiet zones on both sides of the barcode, as shown in Figure 1 and Table 1. 7.4 Degree of Density Specification
The density difference between the unlit unit (space) and the illuminated unit (bar) should be at least 50. For other information about the density difference between the unlit unit (space) and the illuminated unit (bar), the density difference between the unlit unit (space) and the illuminated unit (bar) should not exceed 0. The density difference between the unlit unit (space) and the illuminated unit (bar) should be at least 50. This requirement applies to the film that has been coated. Ensure that the product is stored before and after exposure. Six with the validity period, the processing meets the established standards.
GH/T9185-2003/ISO1007.20D0
H3 latent image code recognition line: IX code: Part ix mother
Part 1 Fen
Article number
Part 2
Article inverse number
Thai 3 ()
OX clever band
"Part
GBT8185-2003/1S0FC07.200G
Article number
Full shadow bar code recognition line: Dx adjustment 2 part
Cekang teaching
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.