Some standard content:
Jcs 59.090.30
People's Republic of China Textile Industry Standard
FZ/T73013—2004
Generation 2/73013-1s98
Knitted gwimmingsuits
2904- Published on 07-03
Implemented by the National Development and Reform Commission of the People's Republic of China on 2001-11-01
FZ/173013-2004
This standard is confirmed in accordance with the standards of the National Testing and Rural Materials Association 4STMD3-1u95 shows that the standard parts of women's adult and children's swimming menstrual needle assembly can be priced from 1. This standard can be compared with ASTMT>3996-193 standard, which is non-equivalent to this standard f750131996c knitted liquid packaging 3. Compared with F2/T73913-108, this standard has the following changes: - Added requirements for knitted swimwear specifications, which are divided into three types: integral ice suits, split varnished suits and swimsuits; added leather armor content The limitation is that the joint quick-connect chain skin expansion of the garment should be 75/k. The pH of the finished product should be 4.0--7.5. The index is 75/k. In addition to the pull-down rate index, the total experimental method is ; You recover the melted water (ice body request) pull single sex recovery rate operation test method, the efficacy concentration is g53m3/.: The reverse pull and flush sub-term is changed from 10 times to 5 free: You changed the test to prove the moderate color washing Method + experiment! , the static index has been improved; - One can change the test method for fluoride resistance and water color fastness, and the effective image concentration is from 1C/I to mR/L: full training: standard consultation.
This standard has been issued by the Central District Textile Industry Association and is under the jurisdiction of the Planning and Fabrics Branch of the Standardization Technical Committee for Full Pressure-Proof Fabrics. Co., Ltd. is responsible for setting the standard. The main setters of this standard are: Liu Wenrong, Zong Ji called Ben Tanwen 1! 195: First released in December, 2014 7th Diao Di Youting I
1 Scope|| tt||Knitted swimwear
FZ/T 73013—2004
This standard specifies the product classification and guidance, requirements, test methods, and judgment rules for knitted swimwear including product instructions, packaging, and comfort. , Shicun.
Standard Liuyue" identifies warp knitted and weft knitted swimwear products made of rat fiber and cotton fiber. Designed swimwear made of other anti-woven fibers can be included in the clothing hot line|| tt||2 Normative Reference Documents
The clauses in the following documents shall only apply to this subject and become the clauses of this subject. This standard does not apply to either the internal or sample editions: however, parties are encouraged to develop newer versions of these documents in accordance with the requirements of the standard. The new version of this standard is applicable to this standard. GB25u Color Specification (GB250199idt15) 105-A32199:) GR/T2S1F New method for quantitative chemical analysis of two-component fiber blended products (GB/T29101997.cqVIS) 18.13: 1977|| tt||GB/T 25I1E
Missing thread. Chemical analysis method for determination of one-component fiber blended products (G/T2911-977, 1V1S0) 5088: 197h
GB/T 29] 2.
Determination of Formaldehyde in Fine Fabrics Point 1: Hydrolyzed Medium Aldehyde (Water Extraction Method: C/T392.1 Textile Color Test Washability Color Turning Degree: Trial 1 (GH/T3921 .1--1597VS0)105:1980
GR/T4R6 Grain and Textile Package Number
GB/T 5714
Textiles Color Fastness Test Seawater Color Fastness CH5296.4 Clearance Instructions for use, fabric preparation and packaging instructions for cotton underwear specifications and sizes engraved
GR/T 6E11
GB/T 757:
GB/T8170
GB /T842:
Determination of pH value of aqueous extracts of components (GB/T7573-2U3, ISOHC.: 13&0.MUL shock value is sufficient to meet the current rules
medicinal products
Color fastness test Artificial light color moderate oxygen (GB/T9127·1J8,0[5)10512GB/T B433
Package fastness test quantity Chlorinated water color density: Youchiyong> (CB/T9438— 108.1S pharmaceutical products
lU5-E03,1079)
G1/T8878
Cotton knitted underwear
FZ/T01053
Fabric fiber content Logo
F2/01057.1--C19511 Preparation test method for knitting F21095 Test method for fiber content of spandex products FZ/70001
Standard terms for finished knitted fabrics
F2T70CC6 External knowledge Stretch elasticity Afujia test age FZ/T73012 Wenyo
3 product categories and models
3.1 The fabric swimsuit is divided into three types: integral swimsuit and split swimsuit. pair. F7./T73013—2004
3.2 Source clothing branding marks the appropriate net height and net chest in centimeters (the standard of the home country. Among them, split-type clothing with zero cups is marked with three Z/ T7312 heat is.
4 requirements
The inner quality and the external quality must be fully integrated and the inner quality must be fully activated. Nine indicators including resistance to chlorinated water (swimming pool water), color fastness to chlorinated water, municipal seawater color fastness, water color fastness to drifting (swimming pool water resistance to artificial light, color fastness to artificial light), external quality Any violations including surface link points, specification size differences, original size differences, etc. 4.1 Grading Regulations
4.1.1 The negative purple grade of the designed green clothing will be classified as a second grade product. First-class products and qualified products 4.1.2 The points of knitted swimwear are determined according to the quality tray (delivery batch > order calculation, the quality of external parts is evaluated, and the second-class comprehensive evaluation is based on the highest grade. || tt||4.2 Intrinsic quality requirements
4.2.1 Intrinsic quality may be found in Table 1.
Table 1 Intrinsic quality requirements
1%:
Pumped water (Nijin pool water) digging bomb rate/() quasi-fish military degree·board
Wetting-resistant water color rate in the
Public chlorinated water color Car hanging swimming color water)/garbage
artificial light color semi-grade/grade
excellent product
agency, color grade 1.12 standard quality is dark, heart 1/1 \Needle control deep breath is the position, as T7T>1:51 regulations are implemented
-, 3--7. E
中文
3.Beige 2—33||tt ||4.2.2 When the weighing content of fibers is 10% or less, the actual content shall not exceed 3% of the total weight of the fiber according to the standard method. 4.2.3 When the elasticity is reported as missing ends. 4.2.4 The color fastness of printed products is based on the main package adjustment as a test aid and the final evaluation result. 4.2.5 Endogenous limit instructions, the test result is early and low as the evaluation result of this batch of products. Based on the above, 4.3 Appearance quality requirements
4.3.1 External quality rating regulations
4.3.1.1 Multi-view quality rating is based on surface energy points, specifications and internal dimensions. 4.3.1.2 The same product can only be evaluated based on the appearance points found on a product that are different from the quality level, even if it is evaluated according to the low-quality screening points. 4.3.1.2. If the flash throw is a low surface energy point, it should be downgraded by one level. 4. 3. 1. 3. See Table 2 for the surface energy points. However,
must be rectified with the steel user. | Photo printing control, colorization
,, eat, spend
Minghualuo
Surface treatment comments and other regulations
Non-standard comments
Plain Xu
Small charge
Classics reading test
Adventure training outside m1
Heart promisebzxz.net
No sinking promise
.4-yuan
group comparison: double the amount to 2
is positive, the number of points reported in the table is large and the number of points in the table is large and the calculation is complete: Table 3 The level of each point is weak The inner support surface of the needle gauge points the color direction to choose Zhou Kuaixing Jiang S: Any clothes that are not broken in the text of the music and the patterns are ordered for you (P/T road version is determined by the hot line, calculation 4: the color room is calculated according to 2m,
4.3.2 Specification size deviation is in the table.
Compared to the An product
Permitted size deviation
General: Other core increase in the price of this Sichuan connection supply and demand sides of the economy and Han, product
FZ/I73013—2004
Cheng, and fill, Yang
Wang Yusi hook place
I fell before! Deep.
Prototype Anyi outer limit 1 2 places
Xiao Kai Jin Chong
Generation strict permission
2. 3 ca..
Cannot be repeated
Taiwan works
rz/T73013—2004
4.3.3 This record size difference see Table 4:
Remember to find
4.3.4 Request for installation micro-people position and heat setting,
Table 4 body size difference
Legal product
4.2.4.1 The whole 4 style except the small material 1 of the second measurement load part. 4. 3. Year. 2 guided style swimsuit on the basis of the judgment can control the six examples of the reverse figure 24.3.4.3 recorded the research and measurement example music example also Figure 3. Length:
Fat feeling:
Crotch change;
Chest flow.
First-class product
One-piece swimsuit measurement part example
Figure 2 Two-piece swimsuit top measurement part example Unit fire rotten rice
Geck;
Xiangren:
7.—Sample length,
4.3. 4. 4
Measurement position specification table,
Figure 3 Example of measured position
Table 5 Measurement position specification
Measurement point specification center
Before the belt is fixed position to the position
Day monitoring you hope
The center of the mouth is allowed
The force of the casting mouth is close to the measurement
White piece 7 places of quality
Nature: According to the different styles, the belt information supply and demand system is coordinated and implemented, 4.3.5
Sewing regulations
Maintenance should be firm, the stitching is flat and straight, and the tightness is appropriate. The problem place is strictly used with four or more seams or fine, and the flat plan is counted when the edge is pulled back to reinforce. 4.3.5.3
4.3. 5, 4
FZ/T 73013-- 2004
The lower part adopts the method of shrinking, and the foot adds the lining cloth (change the edge). The root also tries to select the final non-material and agent, and the color delivery must be consistent: 4.3.5.5 When sewing, use high-strength color brocade to reduce the paint and rush the warp to correct the thread. 4.3.5.5 The provisions of stitch density change are shown in Table 6.
Table 6 Stitch density provisions
The design is not T
The bagging machine
4.3.5.7 The needle control needs to be measured in the middle of a signing process, 4.3.5.8 The bagging is to be used! The width of the knife door is less than 0.4 c11. The five lines are not less than 0.61. 5. Test method
5.1 Sampling quantity, appearance quality inspection, sample preparation and test conditions shall be formulated and implemented in accordance with GR/T?8.
5.2 The number of appearance quality sampling
shall not be less than pieces.
Kaifeng machine
Single type needle complaint stock re-examination
FZ/T73013-20C4
5.3 The number of internal quality push samples
shall not be less than "pieces
5.4 Test items
5.4.1 The rate test of Lazhou is carried out in accordance with the length of the median force law of FZ/T7235. Among them, the rate of violation is 0mm/in, set to 14.?, and the number of random single samples is true. Careful three The effective size of the test is 13x × 13cm. The elongation of the fabric surface finishing agent is the elongation when the first force is applied, and the test value is the test value. Only for fabrics. 5.4.2 Determination of elastic recovery rate of hydrogenated water (not ice pool) 5.4.2, 1 treatment: The effective amount is grams per three times the effective working size of the sample is 10cm × 5c. The sample is used (B, "H4 fast running, the effective chlorine slightly changes with mR/1. Select 4b in the container 5.4.2.2 Determination of elastic rebound rate: Mix the pieces at a certain temperature under the condition of Z/7 (m/min, and repeatedly pull them. The force is 14.7N and the pulling is repeated 5 times. Test the elastic rebound rate of the micro-material in accordance with GB/T 539. 5.2.4 Resistance to chemical water (deep pool water test) shall be carried out according to GB/T 6498-2003. 5.4.5 Color fastness test G ratio / 57\1 fast 5.4.6 Attached color 0 test cold according to 15T427 method 3. 5.4.7 Fiber content test according to CB/T261, TS11.F7/T01C57.=--01057.11F7/U109 implementation 3.4.8 City formaldehyde content according to 12.1 hot:
5.4.9 Questioning inspection report / 7575 hot
5 Determination plan
6. 1 Appearance quality
6.1.1 Specifications: see this symptom piece type, color, size, and non-compliant product rate. If the non-compliant product rate is within 5.0%, the product is determined to be non-compliant. 1.2 Inner packaging markings are counted by piece, and outer packaging errors are allowed. 6.2 Inner quality
Inner fiber content, elasticity, elasticity, color fastness, color resistance, resistance to negative half-degree chemical (artificial light) test results are qualified, the product is determined to be unqualified; if unqualified, the product is determined to be non-compliant. 6.3 High 6.3.1 If you have any objection to the inspection results received by the inspection department, you may request for correction within the specified time. 6.3.2 When the inspection results are reviewed, the inspection rate must be guaranteed. 6.3.3 The inspection data is the ratio of the initial inspection data. The cold book judgment rules shall be carried out according to the provisions of 5.1 and 5.2 of the final standard. The following shall be formulated based on the age of the inspection results:
7 Product instructions, packaging, transportation, storage 7.1 Product introduction 2 certification "B6296.4 Number of regulations 7.2 Packaging shall be carried out according to GB 『4335 Agreement
7.3 Product policy, medical, party pollution, 7.4 Products should be selected in the feather, snail, clean station seat store sheep sales clams broken dew.Sample preparation and test conditions shall be carried out in accordance with GR/T?8.
5.2 The number of sampling for appearance quality shall not be less than pieces.
Kaifeng Machine
Single Type Needle Prosecution
FZ/T73013-20C4
5.3 The number of internal quality samples shall not be less than "pieces
5.4 Test items
5.4.1 The rate test shall be carried out in accordance with the length of the median force law of FZ/T7235. The rate of violation is 0mm/in, set at 14.?, and the number of random samples shall be true. Careful three The effective size of the test is 13x × 13cm. The elongation of the fabric surface finishing agent is the elongation when the first force is applied, and the test value is the test value. Only for fabrics. 5.4.2 Determination of elastic recovery rate of hydrogenated water (not ice pool) 5.4.2, 1 treatment: The effective amount is grams per three times the effective working size of the sample is 10cm × 5c. The sample is used (B, "H4 fast running, the effective chlorine slightly changes with mR/1. Select 4b in the container 5.4.2.2 Determination of elastic rebound rate: Mix the pieces at a certain temperature under the condition of Z/7 (m/min, and repeatedly pull them. The force is 14.7N and the pulling is repeated 5 times. Test the elastic rebound rate of the micro-material in accordance with GB/T 539. 5.2.4 Resistance to chemical water (deep pool water test) shall be carried out according to GB/T 6498-2003. 5.4.5 Color fastness test G ratio / 57\1 fast 5.4.6 Attached color 0 test cold according to 15T427 method 3. 5.4.7 Fiber content test according to CB/T261, TS11.F7/T01C57.=--01057.11F7/U109 implementation 3.4.8 City formaldehyde content according to 12.1 hot:
5.4.9 Questioning inspection report / 7575 hot
5 Determination plan
6. 1 Appearance quality
6.1.1 Specifications: see this symptom piece type, color, size, and non-compliant product rate. If the non-compliant product rate is within 5.0%, the product is determined to be non-compliant. 1.2 Inner packaging markings are counted by piece, and outer packaging errors are allowed. 6.2 Inner quality
Inner fiber content, elasticity, elasticity, color fastness, color resistance, resistance to negative half-degree chemical (artificial light) test results are qualified, the product is determined to be unqualified; if unqualified, the product is determined to be non-compliant. 6.3 High 6.3.1 If you have any objection to the inspection results received by the inspection department, you may request for correction within the specified time. 6.3.2 When the inspection results are reviewed, the inspection rate must be guaranteed. 6.3.3 The inspection data is the ratio of the initial inspection data. The cold book judgment rules shall be carried out according to the provisions of 5.1 and 5.2 of the final standard. The following shall be formulated based on the age of the inspection results:
7 Product instructions, packaging, transportation, storage 7.1 Product introduction 2 certification "B6296.4 Number of regulations 7.2 Packaging shall be carried out according to GB 『4335 Agreement
7.3 Product policy, medical, party pollution, 7.4 Products should be selected in the feather, snail, clean station seat store sheep sales clams broken dew.Sample preparation and test conditions shall be carried out in accordance with GR/T?8.
5.2 The number of sampling for appearance quality shall not be less than pieces.
Kaifeng Machine
Single Type Needle Prosecution
FZ/T73013-20C4
5.3 The number of internal quality samples shall not be less than "pieces
5.4 Test items
5.4.1 The rate test shall be carried out in accordance with the length of the median force law of FZ/T7235. The rate of violation is 0mm/in, set at 14.?, and the number of random samples shall be true. Careful three The effective size of the test is 13x × 13cm. The elongation of the fabric surface finishing agent is the elongation when the first force is applied, and the test value is the test value. Only for fabrics. 5.4.2 Determination of elastic recovery rate of hydrogenated water (not ice pool) 5.4.2, 1 treatment: The effective amount is grams per three times the effective working size of the sample is 10cm × 5c. The sample is used (B, "H4 fast running, the effective chlorine slightly changes with mR/1. Select 4b in the container 5.4.2.2 Determination of elastic rebound rate: Mix the pieces at a certain temperature under the condition of Z/7 (m/min, and repeatedly pull them. The force is 14.7N and the pulling is repeated 5 times. Test the elastic rebound rate of the micro-material in accordance with GB/T 539. 5.2.4 Resistance to chemical water (deep pool water test) shall be carried out according to GB/T 6498-2003. 5.4.5 Color fastness test G ratio / 57\1 fast 5.4.6 Attached color 0 test cold according to 15T427 method 3. 5.4.7 Fiber content test according to CB/T261, TS11.F7/T01C57.=--01057.11F7/U109 implementation 3.4.8 City formaldehyde content according to 12.1 hot:
5.4.9 Questioning inspection report / 7575 hot
5 Determination plan
6. 1 Appearance quality
6.1.1 Specifications: see this symptom piece type, color, size, and non-compliant product rate. If the non-compliant product rate is within 5.0%, the product is determined to be non-compliant. 1.2 Inner packaging markings are counted by piece, and outer packaging errors are allowed. 6.2 Inner quality
Inner fiber content, elasticity, elasticity, color fastness, color resistance, resistance to negative half-degree chemical (artificial light) test results are qualified, the product is determined to be unqualified; if unqualified, the product is determined to be non-compliant. 6.3 High 6.3.1 If you have any objection to the inspection results received by the inspection department, you may request for correction within the specified time. 6.3.2 When the inspection results are reviewed, the inspection rate must be guaranteed. 6.3.3 The inspection data is the ratio of the initial inspection data. The cold book judgment rules shall be carried out according to the provisions of 5.1 and 5.2 of the final standard. The following shall be formulated based on the age of the inspection results:
7 Product instructions, packaging, transportation, storage 7.1 Product introduction 2 certification "B6296.4 Number of regulations 7.2 Packaging shall be carried out according to GB 『4335 Agreement
7.3 Product policy, medical, party pollution, 7.4 Products should be selected in the feather, snail, clean station seat store sheep sales clams broken dew.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.