GB/T 9065.1-1988 Hydraulic hose connector connection dimensions flared type
Basic Information
Standard ID:
GB/T 9065.1-1988
Standard Name: Hydraulic hose connector connection dimensions flared type
Chinese Name:
液压软管接头 连接尺寸 扩口式
Standard category:National Standard (GB)
state:in force
Date of Release1988-04-18
Date of Implementation:1989-01-01
standard classification number
Standard ICS number:23.100.30
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
associated standards
Publication information
other information
Release date:1988-04-18
Review date:2004-10-14
Drafting unit:Tianjin Engineering Machinery Research Institute
Focal point unit:National Hydraulic and Pneumatic Standardization Technical Committee
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 9065.1-1988 Hydraulic hose connector connection size flared type GB/T9065.1-1988 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Hydraulic power-Hose connector
Flare type
Connecting dimension
Hydraulic power-Hose connector-Connecting dimension
(Part I, Flare type)
UDC 621. 643. 4
GB 9065.1-88
This standard specifies the connection dimensions of flare hose connectors for hydraulic systems with hydraulic oil (liquid) as the working medium. 1 Reference Standards
GB 3683 Copper wire braided hydraulic hose
GB5625~5653 Flare type pipe connector
2 Types and dimensions
2.1 The connector type is shown in Figure 1. bZxz.net
GB5625~5653
2.2 The connection dimensions are specified in the following table.
Approved by the State Machinery Industry Commission on April 5, 1988. Figure 1
Implemented on January 1, 1989
GB9065.1—88
Flared pipe joint
d (reference)
Inner diameter of hose
M 16X1. 5
M33×2
M45×2
Additional instructions:
This standard is proposed and managed by the National Hydraulic and Pneumatic Standardization Technical Committee. This standard was drafted by the Tianjin Engineering Machinery Research Institute of the State Machinery Industry Commission and the Luzhou Hydraulic Accessories Factory.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.