JB/T 3411.107-1999 7:24 Dimensions of cone/Morse cone intermediate sleeve with flat tail
Basic Information
Standard ID:
JB/T 3411.107-1999
Standard Name: 7:24 Dimensions of cone/Morse cone intermediate sleeve with flat tail
Chinese Name:
7：24 圆锥/带扁尾莫氏圆锥中间套 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Metal Cutting Machine Tools>>J52 Machine Tool Accessories and Accessories
associated standards
alternative situation:JB 3518-1983
Procurement status:neq ISO 4202:1978
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Publishing department:Mechanical Science Research Institute
Introduction to standards:
JB/T 3411.107-1999 This standard is a revision of JB 3518-83 "7:24 cone/with flat tail Morse taper intermediate sleeve dimensions". Only the following points were modified during the revision, and the main technical content remained unchanged: - Writing format; - Standard name plus English; - Relevant reference standards and related contents; - Thread drawing method. This standard is not equivalent to ISO 4202:1998 "Transition sleeve with 7/24 outer cone for Morse taper shank tools". This standard specifies the type and size of 7:24 cone/with flat tail Morse taper intermediate sleeves. JB/T 3411.107-1999 7:24 cone/with flat tail Morse taper intermediate sleeve dimensions JB/T3411.107-1999 Standard download decompression password: www.bzxz.net
Some standard content:
IC5 25.00.01
Mechanical Industry Standard of the People's Republic of China
IB/T 3411.101-3411.127—1999 Accessories for milling machines
Accessories afmilling maclhincs1999-05-2U Issued by
National Machinery Industry BureauwwW.bzxz.Net
2000-01-01 Implementation
Mechanical Industry Standard of the People's Republic of China
7: 24 taper/masr taper with flat rhinoceros Morse taper intermediate set
Changing diameter bush with 7 : 24taper/masr taper with flat rhinoceros Morse taper intermediate set This standard specifies: 24 non-standard tail chain and 2 reference standards
JH/T3411.107-1999
1518-3
The following standards contain clauses, which constitute the meaning of this standard through reference in this standard. The versions shown are valid. All standards are the latest version and are applicable to this standard. The possibility of using the latest version of the following standards is discussed: GRT1443-1996
Folding machine and tool inserting machine
(IB 3837.3-19837: 24 National cone connection tool dimension tree 3 type and size
model and child excavation, drawings and clothing provisions
National Machinery Industry Teng [999-05-20 approved 20KH01-1 implementation
7 : 24
Drawing density
Intersection+
8/34n1.107—1999
1:24The scale and error of the magnet are compared with the provisions of 038373. The two types of center and bias are in accordance with the provisions of BT1443. 4 Marking
Marking example:
External? : 2 Network group cut number, internal class is the school shop No. 3? : 24 braided with pain pink original small room: room 40-3JB:T 3411.[07--1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.