Some standard content:
IS 61. 050
Y 75: Y 78
Chemical Industry Standard of the People's Republic of China
(1999)
Published on April 20, 1999
Implemented on April 1, 20000
State Shishan and Chemical Industry Bureau
ICS 01. 040. 61:51. 060
Registration No.: 2810—1995
HG/T 3083 1999
This standard is equivalent to the international standard IS103:13 and the terminology of the chemical industry standard HG-83--198.
This standard is only suitable for my country's terms and does not use those internationally used terms. The main differences between this standard and 883--1S88 are: the following technical design terms are deleted:
Inner binding parts;
Labeling strips:
The heat shrinkage test of micropores;
Sole test:
Outsole resistance test,
Toe impact test;
Shoe toe test:
Korean The test results are as follows:
The edge of the bite is uneven,
The following 5 qualities that have not been fully tested have been designed, and the static glue batch is designed as static glue, now the elimination number is 2.3.15>: Anti-static is revised to anti-static self-fresh (now shortened to 2.2.22) 1 External heel compensation is limited (ball number is 2.3.10): Internal rear limit is limited (now compiled as 3)
Performance repair (for defects (now shortened to 2.57. According to the terminology of 15 core 1C335190, the following 18 terms have been revised: Glue;
Fabric stock society (now number 2.2.27:
Potential (number 6.2.13:
Wei (Australia number 2.3.4);
After the account Article! Regulation number 2.3.17;
clothing belt (now number 2.3.18);
waterproof cloth (now number 2.3.3
outer sole (now number 2.3.35);
corrosion protection number 2.1.41)
midsole (general number 2.3.431
small bottom (model number 2.3.4:),
inner bottom (now number 2,8.44):
inner bottom cloth 1 (now number 2.3.45):
inner head anti- (now number 2.2.18
-back benzene (number 2-J.5U);
distance number 3.)
air leakage Vulcanization: [IGT3083-1999] This standard is the date of implementation, and is the same as HG/T3083-1999. It is issued by the People's Government of the People's Republic of China and the Technical Supervision Bureau of the Chemical Industry Association. This standard is a national standard issued in 1988, and was revised into a recommended industry standard in 1998, and was abbreviated in 2007. It is a term used in the chemical industry standard of the People's Republic of China. This standard specifies the classification, structure, components, manufacturing process and other technical requirements and definitions of rubber shoes. This standard is applicable to the formulation, standardization, and other related technical documents. 2 Technical spectrum and definitions 2.1 General Rubber shoes HT3023-1995 EQ19010335:1990 G3U—1938 Shoes with rubber or other elastomer as the main material, and fabric, rubber and other synthetic or natural materials as the main material. 2.2 Types 2.2.1 Rubber shoes (all rubber fort wear boot) rail ubber al hocg track and outer sole with rubber as the main material, including waterproof straps and boots. 2.2.2 Cloth and rubber shoes - shoes with fabric as shoelaces and rubber or other elastomeric soles. 2.2.3 Rubber-plas:ic shoes made of synthetic or natural materials. Cold-molded, injection-molded, and made of thermoplastics.
2.2.4 Rubber shoes with water-absorbing surface (yuanjin needs shoes, shoes with mouth, shoes with years, pointed toe shoes, etc.! 2-2.5 Leather shoes le:erle has a low-top rubber boots on the outside, which can be waterproof and protect the skin. 7.7. Cross-type raiarubber boots
The bottom is above the ribs, and the men's and women's amines are below the bottom. 2.2.7 Children's boots (bones) are waterproof boots for children: 2.2.8 Agricultural boots for rutlirr buotsfor ugrietturelurk are suitable for labor and school. 2.2.9 T mining boots ircnstria!ratber boois National Petroleum and Chemical Industry 1959-4-20 approved 2000-04-01 implementation || tt || HG/T30831999 || tt || large waste flower thick and deep, with anti-resistance performance, active mining operations wear a rubber surface anti-expansion protection, 2.2.10 insulautedrubberworkingbopts insulation, high quality, internal and external insulation, can determine the voltage suitable for electricians to wear anti-expansion boots, 2.2.11 rubber rubhur housusistant to chemieal 2.2.12 Oil-resistant rubber boots are made of similar materials, such as oil-resistant rubber or rubber, and sometimes have oil-resistant performance and good puncture resistance, suitable for fire fighting boots. 2.2.13 Anti-cold rubber boots are made of cold-resistant materials, and have a protective layer, suitable for wearing in cold areas. 2.2.14 Anti-cold rubber boots are made of cold-resistant materials, and have a protective layer, suitable for wearing in cold areas. 2.2.15 Anti-static rubber boots are made of conductive materials, which can timely eliminate the static accumulation in the human body. 2.2.16 Anti-static shoes are made of conductive materials, which can timely eliminate the static accumulation in the human body. bps lightweight, with rubber or plastic outsole made of various woven materials, 22.17 sports shoes designed according to the specific requirements of various professional athletes, with a total of various specifications for professional sports, etc. 2.2.18 lightweight sports shoes made of various materials, with abrasion-resistant outer soles, for a period of leisure and light training 2.2.19 sports shoes for work or general labor or wear 2.2.20 oil-tesistants shoes with rubber parts such as outer soles, strips, etc., with bite-resistant properties, for protection against contact with oils 2.2.21 sports shoes l
There is an insulating layer between the outer sole and the inner sole, which can withstand the actual pressure and is suitable for workers to wear labor shoes. 2.2-22 Antistaticahaer The sole is made of conductive material, which can timely eliminate the weak protective frog of human body static..2-2-23 Antistatic shoes war-prrn:knex
The special structure and material have the function of preventing and keeping warm: 2.2.24 Children's shoes, made of various materials, suitable for children to wear rubber shoes. The number is 19
7.2.2.2.2.26 Sandals made of rubber soles, rubber soles, natural synthetic materials or heat sensitive silicone. 2.2.27 Children's sandals made of natural synthetic materials. 2.3 Structure 2.3.1 Strap upper The part above the sole that is above the foot and leg 2.3.2 Strap upper The front part of the foot 2.3.3 Back strap The back part of the foot 2.3.4 Tongue The tongue The shaped sheet that wraps around the instep. 2.3.5 The outer layer of the shoe environment, 2.3.6 The lining of the shoe is the layer of the shoe training, 2.3.7 The outer layer of the shoe burning mouercous-ofleg, 2.3.9 The lining of the shoe is to increase the hardness of the training system, and to strengthen the rough surface and the middle part of the shoe, 2.3.70 The lining of the shoe is to increase the strength of the upper or the overall part, and to protect the upper from the impact, so that the upper and the early parts need to be soft and flexible. 2.3-11 The lining of the shoe is the component between the upper and the early parts. su.y
Added seat parts:
2-3.12 Saddle
Reinforced fabric on the shoe.
2.3.13 External back treatment:1ile u-11
Reinforced back heel straps. 2.3.14 Inner back iane-counter
Special heel straps with reinforced back heel straps, 2.3.15 Back heel straps with outer heel straps.
2. 3.16 Biading
Enclosed heel straps,
2.3.17 Heel straps with outer heel straps.
2.3.18 Hackstrip
A strip of material that is attached to the heel.
2.3.19 Hluver
The last part of the heel.
2.3.20 Collar
A component of the outer layer of the system
2.3.21 Reinforcement belt
A belt-shaped reinforcement component that helps the waist.
2.3.22 Ogegsga
A waterproof rubber-coated fabric that connects the shoe gusset to the sides of the shoe.
2.3.23 Ngusget
A component that connects the front and back plugs to prevent dirt from entering the shoe.
2.3.24 Tungue filler
A component that is formed into a layer of light teeth.
2.3.25 Back strap iel:P
Back plane:
2.3-2E system mouth pad toybinoingiller, shoe mouth repair hope solution
2.3-27 loose cloth clastieRussuls
can he long text restore the fire glue some components,
2.3. 2 day some eye cyelet
used to make the shoelaces ventilated eye straps,
2-2.79 turn belt gh1accs
tighten the sinking knot of Jia Ruoyue,
2. 3. 30 Fb1e:kla
used to clip the belt belt clip
used for sex.
2. 3. 32 hanging line sewirx ma:k
The carrier used for the manufacture of shoe parts or accessories.
2.3.33 Mark
HG/T 3083-1999
The part or graphic with a mark, text or other mark. 2.3.3450le
The general term for outsole, midsole and insole.
2.3 35 Outsole
The outer part of the shoe including the front surface, the rear surface or the full bottom of the back. 2.3.36 Outsole made by the mold cavity sealer. 2.3-37 Mulded oalsule
Use it to form a standard outsole.
2.3-38 Microceillaole
Use a composite outsole made of porous material.
2.3.39 Composite outsole:
Use two or more materials with different properties to form a composite outsole 2.3.40 Type wedgedthrough outsole
Inserted in a composite outsole to maximize the effect of the outsole's rear connection position on the shape of the part 2.3.21 Outsole limit h
External parts provided at the rear
2. 3. 42 [outsole-arrt:gh 2.3.43 The lower part of the insole that fills the gap between the insole and the outer sole. 2.3.45 Insole (single) inaole or leather on the sole. HC/T30831999 2.3.46 Cellular insele;920ng insuig and elastic insole, 2.3.47 Toe cap tneap
Protective parts in place.
2.3.48 Inner head 10ppiece
Inner reinforcement piece with stopper rate or property. 2.3.49 Around the edge of the rim
Reinforcement of the whole edge.
23.50 Valve strip 1cphincang
A strip along the bite surface where the edge is opened, which plays a double role in strengthening the edge of the mouth. 2.3.51 Sealing system Im:kirlrip
A non-strength rubber strip or cloth strip used for bonding. 2.3.52 Welt ip::oe guard close to the bottom and the national strip, connecting the core stock strip of the good bottom of the industry, 2.3.53 Polish ri-l
The light of the surface of the burnt rubber surface
2-3.54 Foot length Jengthoffoal
The length from the heel point to the front end of the foot when standing 2.3.55 Distance from the center of the heel to the center of the arca.
2.3.56 The center of the external bone.
2.3.57 The upper point of the foot and the upper and single sex intercourse unidirectional bending part 2.3.58 Thick waist
The point of the five bones twisting the seat of the foot.
2.3.59 Case point f1
Foot Merken middle australis prominence point location:
2.3.60 First part -aefifehmraersphalngul foot effect policy five both related to the location of the Yue,
2. 3-61 First toe adjacent tiac first mctatars rtalangeal Royal shoot first victory joint kiss you,
2.362 Small external prominence atra.roccag5 kinds of national a
shoe outer layer
2.3. 6 shoe lining liniag
shoe training layer,
2.3.7 dry system lg
super shoe emperor front points:
2.3.H shoe burning mouercous-ofleg
system outer layer,
G/T3083
2.3.9 Yao Tong fish lrg iningthigl rklersircm liring for increasing training succession system hardness, such as stiffness and closeness in the rough surface, single middle part, 2.3.70 shoe lining vamp.iniag
for the high part or the overall increase of the help of the smash, instantaneous, soft and other functions and support in the upper and sexual components 2.3-11 sexual eye lining cyelet su.y
Added seat parts:
2-3.12 Saddle
Reinforced fabric on the shoe.
2.3.13 External back treatment:1ile u-11
Reinforced back heel straps. 2.3.14 Inner back iane-counter
Special heel straps with reinforced back heel straps, 2.3.15 Back heel straps with outer heel straps.
2. 3.16 Biading
Enclosed heel straps,
2.3.17 Heel straps with outer heel straps.
2.3.18 Hackstrip
A strip of material that is attached to the heel.
2.3.19 Hluver
The last part of the heel.
2.3.20 Collar
A component of the outer layer of the system
2.3.21 Reinforcement belt
A belt-shaped reinforcement component that helps the waist.
2.3.22 Ogegsga
A waterproof rubber-coated fabric that connects the shoe gusset to the sides of the shoe.
2.3.23 Ngusget
A component that connects the front and back plugs to prevent dirt from entering the shoe.
2.3.24 Tungue filler
A component that is formed into a layer of light teeth.
2.3.25 Back strap iel:P
Back plane:
2.3-2E system mouth pad toybinoingiller, shoe mouth repair hope solution
2.3-27 loose cloth clastieRussuls
can he long text restore the fire glue some components,
2.3. 2 day some eye cyelet
used to make the shoelaces ventilated eye straps,
2-2.79 turn belt gh1accs
tighten the sinking knot of Jia Ruoyue,
2. 3. 30 Fb1e:kla
used to clip the belt belt clip
used for sex.
2. 3. 32 hanging line sewirx ma:k
The carrier used for the manufacture of shoe parts or accessories.
2.3.33 Mark
HG/T 3083-1999
The part or graphic with a mark, text or other mark. 2.3.3450le
The general term for outsole, midsole and insole.
2.3 35 Outsole
The outer part of the shoe including the front surface, the rear surface or the full bottom of the back. 2.3.36 Outsole made by the mold cavity sealer. 2.3-37 Mulded oalsule
Use it to form a standard outsole.
2.3-38 Microceillaole
Use a composite outsole made of porous material.
2.3.39 Composite outsole:
Use two or more materials with different properties to form a composite outsole 2.3.40 Type wedgedthrough outsole
Inserted in a composite outsole to maximize the effect of the outsole's rear connection position on the shape of the part 2.3.21 Outsole limit h
External parts provided at the rear
2. 3. 42 [outsole-arrt:gh 2.3.43 The lower part of the insole that fills the gap between the insole and the outer sole. 2.3.45 Insole (single) inaole or leather on the sole. HC/T30831999 2.3.46 Cellular insele;920ng insuig and elastic insole, 2.3.47 Toe cap tneap
Protective parts in place.
2.3.48 Inner head 10ppiece
Inner reinforcement piece with stopper rate or property. 2.3.49 Around the edge of the rim
Reinforcement of the whole edge.
23.50 Valve strip 1cphincang
A strip along the bite surface to strengthen the edge of the mouth. 2.3.51 Sealing system Im:kirlripbzxZ.net
A non-strength rubber strip or cloth strip used for bonding. 2.3.52 Welt ip::oe guard close to the bottom and the national strip, connecting the core stock strip of the good bottom of the industry, 2.3.53 Polish ri-l
The light of the surface of the burnt rubber surface
2-3.54 Foot length Jengthoffoal
The length from the heel point to the front end of the foot when standing 2.3.55 Distance from the center of the heel to the center of the arca.
2.3.56 The center of the external bone.
2.3.57 The upper point of the foot and the upper and single sex intercourse unidirectional bending part 2.3.58 Thick waist
The point of the five bones twisting the seat of the foot.
2.3.59 Case point f1
Foot Merken middle australis prominence point location:
2.3.60 First part -aefifehmraersphalngul foot effect policy five both close the location of the Yue,
2. 3-61 First toe adjacent tiac first mctatars rtalangeal Royal shoot first victory joint kiss you,
2.362 Small external prominence atra.roccag5 kinds of national a
shoe outer layer
2.3. 6 shoe lining liniag
shoe training layer,
2.3.7 dry system lg
super shoe emperor front points:
2.3.H shoe burning mouercous-ofleg
system outer layer,
G/T3083
2.3.9 Yao Tong fish lrg iningthigl rklersircm liring for increasing training succession system hardness, such as stiffness and closeness in the rough surface, single middle part, 2.3.70 shoe lining vamp.iniag
for the high part or the overall increase of the help of the smash, instantaneous, soft and other functions and support in the upper and sexual components 2.3-11 sexual eye lining cyelet su.y
Added seat parts:
2-3.12 Saddle
Reinforced fabric on the shoe.
2.3.13 External back treatment:1ile u-11
Reinforced outer back protection. 2.3.14 Inner back iane-counter
Special heel back protection, 2.3.15 Back i
Reinforced outer back protection.
2.3.16 Biading
Enclosed outer edge of back parts,
2.3.17 Heel back lining, added outer back rubber strip.
2.3.18 Hackstrip
A strip of material that is attached to the heel.
2.3.19 Hluver
The last part of the heel.
2.3.20 Collar
A component of the outer layer of the system
2.3.21 Reinforcement belt
A belt-shaped reinforcement component that helps the waist.
2.3.22 Ogegsga
A waterproof rubber-coated fabric that connects the shoe gusset to the sides of the shoe.
2.3.23 Ngusget
A component that connects the front and back plugs to prevent dirt from entering the shoe.
2.3.24 Tungue filler
A component that is formed by a layer of light teeth.
2.3.25 Back strap iel:P
Back plane:
2.3-2E system mouth pad toybinoingiller, shoe mouth repair hope solution
2.3-27 loose cloth clastieRussuls
can he long text restore the fire glue some components,
2.3. 2 day some eye cyelet
used to make the shoelaces ventilated eye straps,
2-2.79 turn belt gh1accs
tighten the weight of the moon,
2. 3. 30 Fb1e:kla
used to clip the belt belt clip
used for sex.
2. 3. 32 hanging line sewirx ma:k
The carrier used for the manufacture of shoe parts or accessories.
2.3.33 Mark
HG/T 3083-1999
The part or graphic with a mark, text or other mark. 2.3.3450le
The general term for outsole, midsole and insole.
2.3 35 Outale
The outer part of the shoe including the front surface, the rear surface or the full bottom of the back. 2.3.36 Outsole made by the mold cavity sealer. 2.3-37 Mulded oalsule
Use it to form a standard outsole.
2.3-38 Microceillaole
Use a composite outsole made of porous material.
2.3.39 Composite outsole:
Use two or more materials with different properties to form a composite outsole 2.3.40 Type wedgedthrough outsole
Inserted in a composite outsole to maximize the effect of the outsole's rear connection position on the shape of the part 2.3.21 Outsole limit h
External parts provided at the rear
2. 3. 42 [outsole-arrt:gh 2.3.43 The lower part of the insole that fills the gap between the insole and the outer sole. 2.3.45 Insole (single) inaole or leather on the sole. HC/T30831999 2.3.46 Cellular insele;920ng insuig and with elastic inner part, 2.3.47 Toe cap tneap
Protective part in place.
2.3.48 Inner head 10ppiece
Inner reinforcement piece with stopper rate or property. 2.3.49 Around the edge of the rim
Reinforcement of the whole edge.
23.50 Valve strip 1cphincang
A strip along the bite surface where the edge is opened, which plays a double role in strengthening the edge of the mouth. 2.3.51 Sealing system Im:kirlrip
A non-strength rubber strip or cloth strip used for bonding. 2.3.52 Welt ip::oe guard close to the bottom and the national strip, connecting the core stock strip of the good bottom of the industry, 2.3.53 Polish ri-l
The light of the surface of the burnt rubber surface
2-3.54 Foot length Jengthoffoal
The length from the heel point to the front end of the foot when standing 2.3.55 Distance from the center of the heel to the center of the arca.
2.3.56 The center of the external bone.
2.3.57 The upper point of the armpit: the upper and single sex intercourse of the navicular bone 2.3.58 The waist
The point of the five bones of the sleeping pedicle.
2.3.59 Case point f1
Foot Merken middle australis prominence point location:
2.3.60 First part -aefifehmraersphalngul foot effect policy five both related to the location of the Yue,
2. 3-61 First toe adjacent tiac first mctatars rtalangeal Royal shoot first victory joint kiss you,
2.362 Small external prominence atra.roccag3.19 Packing hluver
Packing the final part of the market.
2.3.20 Collar
System "outer layer" component
2.3.21 Reinforcement belt m rem:l
Band-shaped reinforcement component for the waist.
2.3.22 Swimming cloth ogegsga
Waterproof rubber-coated fabric connecting the shoe grid and the sides of the frog. 23.23 Ngusget
Components for connecting the front and rear plugs to prevent the entry of dirt into the crowd. 2.3.24 Tungue filler
Lightweight tooth 1 layer of the village component.
2.3.25 Rear limit village belt el iel:P
Back plane:
2.3-2E system mouth pad toybinoingiller, shoe mouth repair hope solution
2.3-27 loose cloth clastieRussuls
can he long text restore the fire glue some components,
2.3. 2 day some eye cyelet
used to make the shoelaces ventilated eye straps,
2-2.79 turn belt gh1accs
tighten the sinking knot of Jia Ruoyue,
2. 3. 30 Fb1e:kla
used to clip the belt belt clip
used for sex.
2. 3. 32 hanging line sewirx ma:k
The carrier used for the manufacture of shoe parts or accessories.
2.3.33 Mark
HG/T 3083-1999
The part or graphic with a mark, text or other mark. 2.3.3450le
The general term for outsole, midsole and insole.
2.3 35 Outsole
The outer part of the shoe including the front surface, the rear surface or the full bottom of the back. 2.3.36 Outsole made by the mold cavity sealer. 2.3-37 Mulded oalsule
Use it to form a standard outsole.
2.3-38 Microceillaole
Use a composite outsole made of porous material.
2.3.39 Composite outsole:
Use two or more materials with different properties to form a composite outsole 2.3.40 Type wedgedthrough outsole
Inserted in a composite outsole to maximize the effect of the outsole's rear connection position on the shape of the part 2.3.21 Outsole limit h
External parts provided at the rear
2. 3. 42 [outsole-arrt:gh 2.3.43 The lower part of the insole that fills the gap between the insole and the outer sole. 2.3.45 Insole (single) inaole or leather on the sole. HC/T30831999 2.3.46 Cellular insele;920ng insuig and elastic insole, 2.3.47 Toe cap tneap
Protective parts in place.
2.3.48 Inner head 10ppiece
Inner reinforcement piece with stopper rate or property. 2.3.49 Around the edge of the rim
Reinforcement of the whole edge.
23.50 Valve strip 1cphincang
A strip along the bite surface to strengthen the edge of the mouth. 2.3.51 Sealing system Im:kirlrip
A non-strength rubber strip or cloth strip used for bonding. 2.3.52 Welt ip::oe guard close to the bottom and the national strip, connecting the core stock strip of the good bottom of the industry, 2.3.53 Polish ri-l
The light of the surface of the burnt rubber surface
2-3.54 Foot length Jengthoffoal
The length from the heel point to the front end of the foot when standing 2.3.55 Distance from the center of the heel to the center of the arca.
2.3.56 The center of the external bone.
2.3.57 The upper point of the foot and the upper and single sex intercourse unidirectional bending part 2.3.58 Thick waist
The point of the five bones twisting the seat of the foot.
2.3.59 Case point f1
Foot Merken middle australis prominence point location:
2.3.60 First part -aefifehmraersphalngul foot effect policy five both close the location of the Yue,
2. 3-61 First toe adjacent tiac first mctatars rtalangeal Royal shoot first victory joint kiss you,
2.362 Small external prominence atra.roccag3.19 Packing hluver
Packing the final part of the market.
2.3.20 Collar
System "outer layer" component
2.3.21 Reinforcement belt m rem:l
Band-shaped reinforcement component for the waist.
2.3.22 Swimming cloth ogegsga
Waterproof rubber-coated fabric connecting the shoe grid and the sides of the frog. 23.23 Ngusget
Components for connecting the front and rear plugs to prevent the entry of dirt into the crowd. 2.3.24 Tungue filler
Lightweight tooth 1 layer of the village component.
2.3.25 Rear limit village belt el iel:P
Back plane:
2.3-2E system mouth pad toybinoingiller, shoe mouth repair hope solution
2.3-27 loose cloth clastieRussuls
can he long text restore the fire glue some components,
2.3. 2 day some eye cyelet
used to make the shoelaces ventilated eye straps,
2-2.79 turn belt gh1accs
tighten the sinking knot of Jia Ruoyue,
2. 3. 30 Fb1e:kla
used to clip the belt belt clip
used for sex.
2. 3. 32 hanging line sewirx ma:k
The carrier used for the manufacture of shoe parts or accessories.
2.3.33 Mark
HG/T 3083-1999
The part or graphic with a mark, text or other mark. 2.3.3450le
The general term for outsole, midsole and insole.
2.3 35 Outsole
The outer part of the shoe including the front surface, the rear surface or the full bottom of the back. 2.3.36 Outsole made by the mold cavity sealer. 2.3-37 Mulded oalsule
Use it to form a standard outsole.
2.3-38 Microceillaole
Use a composite outsole made of porous material.
2.3.39 Composite outsole:
Use two or more materials with different properties to form a composite outsole 2.3.40 Type wedgedthrough outsole
Inserted in a composite outsole to maximize the effect of the outsole's rear connection position on the shape of the part 2.3.21 Outsole limit h
External parts provided at the rear
2. 3. 42 [outsole-arrt:gh 2.3.43 The lower part of the insole that fills the gap between the insole and the outer sole. 2.3.45 Insole (single) inaole or leather on the sole. HC/T30831999 2.3.46 Cellular insele;920ng insuig and elastic insole, 2.3.47 Toe cap tneap
Protective parts in place.
2.3.48 Inner head 10ppiece
Inner reinforcement piece with stopper rate or property. 2.3.49 Around the edge of the rim
Reinforcement of the whole edge.
23.50 Valve strip 1cphincang
A strip along the bite surface where the edge is opened, which plays a double role in strengthening the edge of the mouth. 2.3.51 Sealing system Im:kirlrip
A non-strength rubber strip or cloth strip used for bonding. 2.3.52 Welt ip::oe guard close to the bottom and the national strip, connecting the core stock strip of the good bottom of the industry, 2.3.53 Polish ri-l
The light of the surface of the burnt rubber surface
2-3.54 Foot length Jengthoffoal
The length from the heel point to the front end of the foot when standing 2.3.55 Distance from the center of the heel to the center of the arca.
2.3.56 The center of the external bone.
2.3.57 The upper point of the foot and the upper and single sex intercourse unidirectional bending part 2.3.58 Thick waist
The point of the five bones twisting the seat of the foot.
2.3.59 Case point f1
Foot Merken middle australis prominence point location:
2.3.60 First part -aefifehmraersphalngul foot effect policy five both related to the location of the Yue,
2. 3-61 First toe adjacent tiac first mctatars rtalangeal Royal shoot first victory joint kiss you,
2.362 Small external prominence atra.roccag46 Cellular insele;920ng insuig and with seam-shaped elastic inner disease,
2.3.47 Outer head tneap
Protective parts of the help in place.
2.3.48 Inner head 10ppiece
Inner reinforcement parts with stopper rate or potential. 2.3.49 Around the edge of the reinforcement.
23.50 Valve strip 1cphincang
Along the bite surface, the special opening of the edge of the case is used to strengthen the effect of the edge of the mouth, 2.3.51 Sealing system Im:kirlrip
Training solid mold adhesive non-strength rubber strip or cloth strip. 2.3.52 Welt ip::oe guard close to the bottom and the national strip, connecting the core stock strip of the good bottom of the industry, 2.3.53 Polish ri-l
The light of the surface of the burnt rubber surface
2-3.54 Foot length Jengthoffoal
The length from the heel point to the front end of the foot when standing 2.3.55 Distance from the center of the heel to the center of the arca.
2.3.56 The center of the external bone.
2.3.57 The upper point of the foot and the upper and single sex intercourse unidirectional bending part 2.3.58 Thick waist
The point of the five bones twisting the seat of the foot.
2.3.59 Case point f1
Foot Merken middle australis prominence point location:
2.3.60 First part -aefifehmraersphalngul foot effect policy five both related to the location of the Yue,
2. 3-61 First toe adjacent tiac first mctatars rtalangeal Royal shoot first victory joint kiss you,
2.362 Small external prominence atra.roccag46 Cellular insele;920ng insuig and with seam-shaped elastic inner disease,
2.3.47 External head tneap
Protective parts of the help in place.
2.3.48 Internal head 10ppiece
Inner reinforcement parts with stopper rate or potential. 2.3.49 Around the edge of the reinforcement.
23.50 Valve strip 1cphincang
Along the bite surface, the special opening of the edge of the case is used to strengthen the effect of the edge of the mouth, 2.3.51 Sealing system Im:kirlrip
Training solid mold adhesive non-strength rubber strip or cloth strip. 2.3.52 Welt ip::oe guard close to the bottom and the national strip, connecting the core stock strip of the good bottom of the industry, 2.3.53 Polish ri-l
The light of the surface of the burnt rubber surface
2-3.54 Foot length Jengthoffoal
The length from the heel point to the front end of the foot when standing 2.3.55 Distance from the center of the heel to the center of the arca.
2.3.56 The center of the external bone.
2.3.57 The upper point of the foot and the upper and single sex intercourse unidirectional bending part 2.3.58 Thickness of the waist
The point of the five bones of the foot twisting seat.
2.3.59 Case point f1
Foot Merken middle australis prominence point location:
2.3.60 First part -aefifehmraersphalngul foot effect policy five both close the location of the Yue,
2. 3-61 First toe adjacent tiac first mctatars rtalangeal Royal shoot first victory joint kiss you,
2.362 Small external prominence atra.roccagtt||2.3.63 the most prominent point of the little toe:
2.3.64 the most prominent point of the midpoint of the foot:
2.3.G5 the most prominent point of the tuberosityofdistalphalaages;tuplbigo the longest front point of the foot.
2.366 the length of the first and fifth joints of the metatarsalgia
HG/T 3083-.1999
the length of the first and fifth joints of the metatarsalgia
2.3.67 the length of the front bone between the front and back of the heel. 2.3.68 The length of the outer limit (research fat: lanz heel pi:rb the length between the upper bend of the foot and the back double. 2.3.69 The length of the running foot nkiegrtl
due to the length of the thin part of the magic flower
2.3.70 The length of the belly with the length aifgir1h
limits the length of the belly with the length of the hip
2. 3- And the length of the knee joints girih brown bone thick lowering the length of the image point!
2. 3. 72 The height of the foot urilsgi:- heigl the thinnest part of the foot brain and the right side of the bottom of the foot. 2-3 73 The height of the fat fetus calf gi:th heigar from the beginning of the belly to the bottom of the book and the white distance height 2- 3. 74 The height of the evening changes k iuim giril. 2.3.5 The vertical distance from the posterior ligament to the ground. 2.3.76 The vertical distance from the posterior ligament to the ground. 2.3.77 The vertical distance from the posterior ligament to the ground. 2.3.78 The vertical distance from the posterior ligament to the ground. 2.3.79 The vertical distance from the posterior ligament to the ground. 2.3.79 The vertical distance from the posterior ligament to the ground. 2.3.70 The vertical distance from the posterior ligament to the ground. 2.3.83 Bottom lengthof pttcmnflastsole line length: 2.3.B4 Diagonal linelengthFrom tnp ct big coe to back po:n:o: toy bintilingThe straight line length from the front end point of the bottom to the rear end point of the bottom, 2.3-85 Upper lengthinse2cervt
The length of the front end of the body to the rear end point of the body. 2-3.G Lower lengthkcrrve 2.3.87 The length of the bottom line between the front end point and the rear end point. 2.3.88 The distance between the projection of the rear end point and the rear end point of the bottom. IG/T30831999
2.3.89 The length of the face lengtl.of cmved s:tface of last value and the curve length of the front point of the bottom. 2.3.g0i Point length che[engch of eurved linefruin tor.f big tr inark1oer'nr n!hark carrve report and inspection should be the length of the curve from the front end point to the midpoint of the rear tension. 2.3.91 length of metatars-phalangeal joint gurth last tbe and jeint gistk through the constant enjoyment of the work of the toe outer width edge point loss brother one station sleep inside need to reach the ball point of the national length. 2.3.92 length of the girth laame2girth
dig the nest outside free point around the inspection potential together with the length. 2.3.3 big toe width innerwidthrhnf big tac select toe outer protrusion point of the stealing bottom type segment kehui 2.3.4 little toe outer goods er wdth little toe small proof multi-point position of the protection room feeling width fee. 2.3.95 multi-ilnnel wid:h af the f.rstmetetarspl.alengeal first starting position of the value of the bottom type segment width
2.3.C6 the i station toe outer width outrywdchofthefifthmetutrsha.urgra. the fifth distance caused by the pursuit of the room field width change. 2.3.97 Base width widt
7.3.5 AUT widthufwais Width of bottom section
2.3.99 Total width of heel area The total width of heel area between the center of the bottom and the center of the bottom 2.3.100 Front tocspring
The height of the front end point of the bottom at the base coordinates
2. 3.101 Back point heiebt The straight line between the back point and the bottom. 2.3.102 Height.
The distance from the center to the center of the bottom. 2.J.\@center pozition of heal area coavaxizyThe degree of the protrusion of the center point relative to the center inner and outer width points, 2.3 Convexity u1
The degree of the protrusion of the front convexity of the pile store relative to the next, -the required point and the fifth point from the toe width. 2.3.108 Width of the implant: 1ft-100mm x 1ft-200mm. 2.3.109 Length of the implant: 22-100mm. 2.3.109 Width of the implant: 22-100mm. cfbelasT23
The same length of the system.
2.3110 The rear limit radian bankare
HC/T3083
The convex path between the rear end point of the sole and the rear end point of the sole 2-3-117 The convex path between the sole and the sole.
2.3.112 The curved surface of the earvedsuriereo1 last inspection piece corresponding to the instep
2. 3. 1\3 System 1:F :[ 1:s1
The raised part of the rear system of the shoe
2.3.112 The midpoint of the front end of the sole and the sole. 2- 3. 115 The rear end of the sole iu:tum group after rubbing constant and with the value of the bottom knot at the point, 2.3.116 grid langi.adinel axist laatbettrr station weaving profile workers, planting bottom front, back increase point between straight lines, 2,3.1 bottom line cer:tr lim of lst botrum shoe friendship derogatory full of flat semicolon:
2.3.118F center line cll-ved line I-om cop o:big toe mark on the tread surface, there is a curve at the end of the sole that can flow back to the back point, 2-3.119 rear cut Lackcrve
fresh shot vertical to the surface, the mountain line between the back point and the second back point, 2.3.120 mid-point of tieel width line, the most convex point of the back double piece, 2.3.21 midpoint i
midpoint of the back proof line.
2.3122 margin
the intersection of the lining and the curve of the lining. 2.3.123 the correct front wear coordinates. 2.3.124 good number fuurweBr 5:zcg
logo shoes into flash number,
2.3.125 length difference intcrvaisbntweenlengnnarsmg adjacent long number length difference
2.3. "26 figure number tea intcrvalabcewreen lcesnd.cintgirth tti.rsinge sample length number and the station use etc.
2.3.127 model widthnrsings
Zhi silicon connect climb child number.
2.3.128 length number lungrhruarkinga logo light change length of life.
2. 3. 129 plant bottom sample Eattern ot l1st 2.3.130 Samples are the general term for the soles of shoes, the specific parts of which are called samples and the names of the components) 24 2.3.131 Outsole pattern HE/T 3083—1999 The mold for making outsole, the template is called the sample and the names of the components) 2.3.132 Multi-segment outsole MLI-GMILR Based on the wearing requirements of different segments of outsole, it is divided into outsole with different thickness or different pressure range. 2.4 Manufacturing process 2.4.1 Ar cu
The process of making the required shape of the required textile material or other material with the help of a template, electric shears, shears, etc. 2.4.2 Shaving uin
The process of making the required shape of the required material with the help of a template. 2.4.3pprascutungidiecu:ting
The process of punching the required shape of the plastic material or other material through a punching machine using a die and a knife 2.4.4 Rolling cnt
Fix the cutting knife on the machine, and increase the process of taking the parts by rotating. 2.4.5 Molding assembly line zascmslur.gcoaveyergys1em work 1 machine operation and increase the production line for bite molding production, supply, the next process between parts circulation and invitation,
2.4.6 Tooth line stitra
In the joint of the joint of the rubber, use the belt comment sugar or hard single kidney ring to add the unused part, 2.4.7 Mixed gasification tureirurc
A rubber vulcanization method using hot air and hook machine heat as the heat source. 2.48 In-gas vulcanization inditeetsteamairure A rubber vulcanization method using the natural gas of Beicuoqiu or once as the heat source and the hot air as the heating medium. 2.4. 9 Rubber shoe reduction rm:irg r ruhber f,alwrar The process of natural or forced cooling of rubber shoes before taking off after taking off: 2.z.10 Cooling room cuolingroon
equipped with disinfection air supply and exhaust equipment or normal ventilation for cooling of rubber odor 2.4.11 Unbnling The process of taking off the cooled rubber from the shoe hanger by manual or mechanical methods, 2..12 Cloth slurry I.ning gutadiapirtg Lining cloth through latex or pneumatic slurry disinfection: the process of treating the lining cloth with latex or pneumatic slurry, 2.4.13 Limited cloth calendering g;
The lining cloth that has been slurryed and burned, love pressing to flat grid without shaking, must pass. 7.4.14 will! ! 2.4.15 no glossy oil vnihriiag
the three-shaped glue and the station, the boots cooler related consumption increase, on its surface decorated with oil selection process 2. 4. 16 top line trirt
political surface shoes, this cold plan hall with Ding or mechanical force to cut off the shoe mouth will have a lot of glue, 2.4.17 matching cloth adapli:m
according to the basic requirements of color, length, symptoms, etc., many children's cloth fashion material: 2.4.18 cloth danalirg
after scraping the two kinds of cloth, through the combination machine to complete the second process of pasting: 2. 2, 19 section pe eing ner li ig2510 Cooling room cuolingroon
equipped with air supply and exhaust equipment or normal ventilation for cooling rubber odor 2.4.11 Lipping cabinet luxi nlippingunbnling the process of removing the cooled rubber from the shoe hanger by manual or mechanical methods, 2..12 Cloth pulping I.ning gutadiapirtg lining cloth through the latex or pneumatic pulp diffuse disinfection process: the process of treating the suction bite of people, 2.4.13 Limited cloth calendering g;
The lining cloth that has been pulped and burned can be pressed to a flat surface without shaking. 7.4.14 Will! ! 2.4.15 no glossy oil vnihriiag
the three-shaped glue and the station, the boots cooler related consumption increase, on its surface with oil selection process 2. 4. 16 top line trirt
political surface shoes, this cold plan hall with Ding or mechanical force to cut off the shoe mouth will have a lot of glue, 2.4.17 matching cloth adapli:m
according to the basic requirements of color, length, symptoms, etc., many children's cloth fashion material: 2.4.18 cloth danalirg
after scraping the two kinds of cloth, through the combination machine to complete the two processes of pasting inside: 2. 2, 19 section pe eing ner li ig2510 Cooling room cuolingroon
equipped with air supply and exhaust equipment or normal ventilation for cooling rubber odor 2.4.11 Lipping cabinet luxi nlippingunbnling the process of removing the cooled rubber from the shoe hanger by manual or mechanical methods, 2..12 Cloth pulping I.ning gutadiapirtg lining cloth through the latex or pneumatic pulp diffuse disinfection process: the process of treating the suction bite of people, 2.4.13 Limited cloth calendering g;
The lining cloth that has been pulped and burned can be pressed to a flat surface without shaking. 7.4.14 Will! ! 2.4.15 no glossy oil vnihriiag
the three-shaped glue and the station, the boots cooler related consumption increase, on its surface with oil selection process 2. 4. 16 top line trirt
political surface shoes, this cold plan hall with Ding or mechanical force to cut off the shoe mouth will have a lot of glue, 2.4.17 matching cloth adapli:m
according to the basic requirements of color, length, symptoms, etc., many children's cloth fashion material: 2.4.18 cloth danalirg
after scraping the two kinds of cloth, through the combination machine to complete the two processes of pasting inside: 2. 2, 19 section pe eing ner li ig25
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.