GB/T 2804-1981 Structural elements of modular fixture components
Basic Information
Standard ID:
GB/T 2804-1981
Standard Name: Structural elements of modular fixture components
Chinese Name:
组合夹具元件结构要素
Standard category:National Standard (GB)
state:Abolished
Date of Release1981-01-01
Date of Implementation:1982-07-01
Date of Expiration:2008-10-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tool Devices>>25.060.20 Indexing and Tool/Workpiece Holding Devices
Standard Classification Number:Machinery>>Process Equipment>>J45 Combination Fixture
Publication information
publishing house:China Standards Press
Publication date:1982-07-01
other information
Release date:1981-11-17
Review date:2004-10-14
Drafting unit:No. 301, Ministry of Aviation
Focal point unit:China Aviation Industry Corporation I
Publishing department:China Aviation Industry Corporation I
competent authority:China Aviation Industry Corporation I
Introduction to standards:
GB/T 2804-1981 Structural elements of modular fixture components GB/T2804-1981 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China Structural elements of modular fixture components, bolts for grooves Material: M12X1,8 40Cr according to YB6-71 Heat treatment: quenching HRC 35~40 Pretreatment: bluing Bureau issued GB 2804 Proposed by the Third Machine Industry Ministry of the People's Republic of China 3 ~. GB 2804 Implemented on July 1, 1982 301st Research Institute of the Third Machine Industry Ministry Tianjin Institute of Modular Fixtures of the First Machine Industry Ministry 2. T-shaped slot
#+9-21
GB2804-81
T-shaped slot is made of 20CrMnTi steel specified in YB 6-71. M8 series hollow blades = 9 and code = 3 can also be made into corresponding chamfers +3 according to the process conditions. Support section
Square support
22.5×22.5bZxz.net
31×30
60X 60
75×75, 90×9h
Rectangular support
1.8±0.15
6±.15
10± 1.29
22.5×.3m
30×45
15×60. 5×.
75×112.5.60×12，90×120
5. Shoulder nut
16 +g-m8
GB 2804--81
6. Through hole, countersunk hole*
*Including waist-shaped hole and its countersunk hole.
7. Series threaded hole
H is the screw-in depth: H is the screw hole depth.
GB2804—81
8. Guide groove width
9. Butterfly pattern
GB 2804—B1
15 +g. 04
650 g.319
10, hole axis diameter*
d or force
GB2804—81
dH6 or Hi
*refers to the hole auxiliary diameter and outer diameter of the component with matching accuracy requirements, 36t
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.