HG/T 2137-1991 Glass-lined Cross HG/T2137-1991 Standard download decompression password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
Glass Cross
Subject content and scope of application
This standard specifies the types, basic parameters, dimensions and technical requirements of glass crosses HG/T213791
This standard is applicable to glass crosses with nominal pressure (PN) equal to or less than 0.6MPa and medium temperature between -10℃ and 200℃.
Referenced standards
GB1804 Tolerances and fits Limits of dimensions without tolerances GB5780 Hexagonal bolts, grade C
GB61701 Hexagonal nuts, grade A and B
GB9439 Grey cast iron parts
ZBG94004 Technical conditions for glass equipment
HG/T2105 Slip-on flanges for glass equipment
3 Types, basic parameters and dimensions
3.1 Cast iron glass crosses (type B) connected by slip-on flanges shall be as specified in Figure 1 and Table 1.
*PN and DN in this standard represent nominal pressure and nominal diameter, respectively. Approved by the Ministry of Chemical Industry of the People's Republic of China on August 19, 1991. Standard exchange network.mm.bsaomo.com. Free download of various US standard industry materials. Implementation on January 1, 1992.
PN/MPa
HG/T2137-91
Figure 1 Type B
dg× s.
106×9
Standard photography network.bzaoso
.cmAll American standard industry data are free to download
Reference weight
PN/MPa
158×10
214×11
262x12
HG/T2137—91
Note: S and in the figure and table refer to the thickness of the front wall of the pond glass. 3.2 Flange-connected cast iron pond glass cross (C type) is according to Figure 2 and Table 2 Provisions, Www.bzxZ.net
106×9
158×10
158×10
214×11
106×9
158×10
214×11
262×12
Standard pick-up network Mb plus EDS0m various US standard industry data free download 170
Reference heavy Meng
120240
HG/T2137—91
Figure 2C type
86×8.5135|270190128150/4×17.5106×9
310210148170
132x9.5175350
240/178
Standard newspaper website w, bzsom
106×9
Free ticket for various US standard industry information departments
110/4×13.5
5230140|90||t t||120240
120240
130260
135270
135|270/190
HG/T2137--91
158×10195390265202225||tt| |nx,
2605203202582808×17.5
214x11
26 2×1231563037531233512×17.5250
Note: S and in the figure and table refer to the thickness of the front wall of the sugar glass 3.3 Marking example
106×9
158×10
106×9
158×10
214x11
106×9
158×10
214×11
262×12
170/3 40/140
1753501
180360/190
185370210
380240
195130017652021325
205410
140190
21543 0/210
440240178200
450265202225
26052032 0258
4901140
250500160
255510/190
260520210
270540
2751550
110130
202225
0375312335
PN of B-type pond glass four-way is 0.6MPa, DN, is 65mm, DNz is 50mm mark: four-way PN0 .6DN65/50-BHG/T2137-914·Technical requirements
、4.1 Material selection, manufacturing, testing and acceptance shall be carried out in accordance with ZBG94004 and this standard. 4.2 Manufacturing tolerance and allowable deviation
4.2.1 The materials of B-type and C-type crosses shall comply with the relevant provisions of GB9439 mm
4.2.2 The allowable deviation of the center circle diameter of the bolt hole on the C-type cross flange and the chord length of two adjacent bolt holes is ±0.6mm, and the allowable deviation of the chord length of any two bolt holes is 1mm.
Standard search
HG/T2137-91
4.2.3 The tolerance grade of the un-toleranced dimensions of the machined surface shall comply with the IT14 grade specified in GB1804, and the tolerance grade of the un-toleranced dimensions of the non-machined surface shall comply with the IT16 grade.
4.2.4 The allowable deviations of lengths L, L, L2, L, shall be in accordance with the provisions of Table 3. Table 3
65~100
4.3 The slip-on flanges for type B crosses shall be selected in accordance with HG/T2105. 125~200
The bolts for flange connection shall be in accordance with the provisions of GB5780, the nuts shall be in accordance with the provisions of GB6170, and the gaskets shall be selected in accordance with relevant standards. 4.4
4.5 The water pressure test pressure and the maximum working pressure at different temperatures shall be selected in accordance with Table 4. Table 4
5 Packaging, transportation and storage
Test pressure
5.1 The product shall be accompanied by a packing list, product certificate and product instruction manual. 5.2 Avoid collision during handling and transportation.
5.3 The exposed pond glass surface shall be sealed with soft gaskets and blind plates. 5.4 The product should be stored indoors. Open-air storage or stacking is not allowed. Lianjia said:
This standard is proposed by China National Chemical Equipment Corporation. This standard is under the jurisdiction of the National Technical Committee for Standardization of Sugar Glass Equipment. This standard is drafted by the Shanghai Pharmaceutical Design Institute of the State Drug Administration. The main drafters of this standard are Li Yijun, Hua Qiuyuan and Bao Aiyuan. mm
The maximum working pressure P at the following temperatures
From the date of implementation of this standard, the former Ministry of Chemical Industry of the People's Republic of China Standard HG5-258-79 "Stone Glass Cross-section" will be invalid.
Free download of various US standard industry information
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.