This standard specifies the technical requirements, test methods and inspection rules for traffic cones. This standard applies to traffic cones that are used to temporarily separate traffic, guide traffic, direct vehicles around dangerous sections, and protect construction site facilities and personnel. GA/T 415-2003 Traffic cones GA/T415-2003 Standard download decompression password: www.bzxz.net

1CS03.220.7C
People's Republic of China Public Security Industry Standard GA/T415—2003
Traffic cones
2003-02-28 Issued
Ministry of Public Security of the People's Republic of China
2003-10-01 Implementation
This standard is issued by the Ministry of Public Security Traffic Management Bureau
This standard is drafted by the Ministry of Public Security Traffic Management Engineering Research Institute, and the main drafters of this standard are Lei Yundu, Wang Junhua, and Zou Yongliang. GA/T 415—2003
1 Scope
Conical traffic signs
This standard specifies the technical requirements, test methods and inspection rules for male and female flexible signs. GA/T 415—2003
This sign is suitable for paved traffic signs that are used to temporarily separate vehicle flows, guide traffic, allow vehicles to temporarily pass dangerous areas, and protect construction facilities and personnel.
2 Normative references
The following documents have become references to this standard through reference. For the referenced documents with a date indicated, all subsequent amendments (excluding those resulting from errors) or revisions are not applicable to this standard. However, the latest versions of these documents are applicable to the referenced documents. B/T523 Determination of tensile stress-strain properties of rubber or thermoplastics B/T104 (Test method for tensile properties of plastics)
GB/T39/8 Standard lighting and illumination observation conditions GR/T3979 Method for measuring object color
G58 Road traffic signs and road markings
G/T1543.2 Test methods for exposure to laboratory light sources Part 2: Lighting JT/T279--1995 Road traffic Technical conditions for standard board 3 Definitions
The following terms and definitions apply in this standard. 3.1
Luminous intensity coefficient Hc is the ratio of the effective light intensity on the retroreflective plane in the direction of the light to the illuminance F on the retroreflective plane perpendicular to the direction of light incidence, R=E.
Where:
R—luminous intensity coefficient, unit is cd·lx-1: [Luminous intensity, unit is cd·lx-1]: E multiplied by illuminance: unit is 1x (1x). 3.2
Retroreflection coefficient Rc is the quotient of the luminous intensity coefficient on the retroreflective surface of the plane divided by its surface area, RR
R\—retroreflection coefficient, unit is received per square kilometer.Inspection If one of the tests does not meet the requirements, the model is judged to be unqualified for the type (finalization) inspection.
Table 5 Test items and test sequence table
Special test
Test items
Shape, size inspection
Appearance inspection
Electrical and electrical performance test
Reverse test
Overall material qualitative test
Resistance test
Material compression resistance
Standard length testWww.bzxZ.net
Monitoring performance test
E. 3 Factory inspection
6.3.1 Inspection requirements
Type inspection
Factory inspection
Product design
After the product passes the type inspection, before the product leaves the factory, the factory inspection of the deformable road sign shall be carried out in accordance with the items specified in Table 5. B.3.2 Inspection agency
Factory inspection can be carried out by the quality inspection department of the manufacturer, or by entrusting a qualified inspection agency to conduct the inspection. 6.2.: 5
6.3.3 Inspection and judgment
GA/T415—2003
Factory inspection shall also be carried out by the manufacturer in accordance with the requirements of Table S. If any item does not meet the requirements, the factory inspection of the deformable road sign shall be judged to be unqualified and shall be reworked and repaired before re-inspection. 7 Packaging and marking
7. 1 Packaging
The packaging of cone traffic signs should meet the requirements of moisture-proof, impact-proof, squeeze-proof and corrosion-proof. Each individually packaged product should have a product manual, product inspection certificate, product after-sales service license and other accessories. 7.2 Labeling
Be careful to put clear and durable marks on the packaging of traffic cone products. The marks should indicate the Chinese product name, model and specification, trademark, manufacturer name and location certificate, and the product quality standard number and name. 8 Transportation and storage
8.1 Transportation
The packaged traffic cone products should be able to withstand transportation by cars, trains, ships and airplanes. 8.2 Storage
The storage environment temperature of traffic cone products should be around 10--4°C, with relatively low humidity.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.