This standard specifies the model, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of mica foil for electrical insulation. This standard applies to mica foil with flaked mica paper as the base material, suitable adhesive paint as the adhesive, single-sided, double-sided or multi-layer adhesive reinforcement material, plasticity at a certain temperature, and the B-stage adhesive contained in it can be finally cured after application. JB/T 901-1995 Mica foil JB/T901-1995 Standard download decompression password: www.bzxz.net
Some standard content:
Machinery Industry Standard of the People's Republic of China JB/T901-1995 Mica Foil Published on November 24, 1995 Ministry of Machinery Industry of the People's Republic of China Implementation on June 1, 1996 Mechanical Industry Standard of the People's Republic of China Subject Content and Applicable Scope JB/T901-1995 Replaces JB901-74 JB148974 This standard specifies the model, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of mica boxes for electrical insulation. This standard applies to mica foil with flaked mica or mica paper as the base material, suitable adhesive paint as the adhesive, single-sided, double-sided or multi-layer adhesive reinforcement material, which has plasticity at a certain temperature and can be finally cured after the B-stage adhesive contained in it is applied. Reference standards GB5019 GB5020 Product classification Electrical insulation mica products Electrical insulation mica products Test methods Definition and general requirements This standard divides the models according to the composition structure and heat resistance of the products. The product models are shown in Table 1. Table 1 Product model 5834-1 5836-1 5841-1 5842-1 5843-1 5851-1 Reinforcement materials Alkali-free glass cloth and polyester film for electrical use Alkali-free glass cloth for electrical use Alkali-free glass cloth and polyimide film for electrical useAlkali-free glass cloth and polyester film for electrical use Alkali-free glass cloth for electrical use Polyester film Alkali-free glass cloth for electrical use Technical parts Adhesive||t t||Epoxy adhesive paint Phenolic epoxy adhesive paint or epoxy Epoxy diphenyl ether adhesive paint Organic silicone adhesive paint Diphenyl ether adhesive paint Application range Applicable to the rolled insulation and parts of motors and electrical appliances with a working temperature of 130°C Applicable to the rolled insulation and parts of motors and electrical appliances with a working temperature of 155°C Applicable to the rolled insulation and parts of motors and electrical appliances with a working temperature of 180°C The surface of the mica box should be flat, the adhesive should be evenly distributed, the edges should be neat, and foreign impurities and stratification are not allowed. 4.2 Dimensions 4.2.1 Thickness The nominal thickness and allowable deviation of mica box are shown in Table 2. Approved by the Ministry of Machinery Industry on November 24, 1995 Implementation on June 1, 1996 5834-1 5836-1 5840-1 5841-1 5842-1 5843-1 5851-1 Length and width JB/T901-1995 Nominal thickness 0.17; 0. 20 0.20;0.25 0.17; 0.20 0.11; 0.15 0.17; 0.20 0.25; 0.30 0. 10 ;0. 15 0.20;0.25 Deviation of individual value from nominal thicknessbzxz.net The recommended length of mica box is 500mm~1200mm, and the recommended width is 300~1000. It can also be supplied according to the agreed size between the supplier and the buyer. The deviation of length and width of mica foil trimmed according to the nominal size is ±5%. 4.3 Performance requirements The performance of mica foil shall comply with the requirements of Table 3. Table Indicator name Volatile matter content Adhesive content Mica content Average value Individual value Plasticity Long-term heat resistance Temperature index Test method 5834-1 Evaluation by visual observation. ≥ 30 ≥ 34 5836-1 5840-1, 5841~1 ≥ 45 5842-1 5843-1 Treat at 110±5℃ for 15min to make a plastic tube≥130 According to the provisions of Chapter 1 of GB5019. Length and width Measure at least three places with a ruler with a scale of 1mm and report the average value. Treat at 130±5℃ for 15min to make a plastic tube Volatile matter content According to the provisions of Chapter 3 of GB5019. Adhesive content According to GB5019 5Mica content According to the provisions of Chapter 3 of GB5019. Dielectric strength According to the provisions of Chapter 16 of GB5019. Plasticity According to the provisions of Chapter 15 of GB5019. Temperature index JB/T 901 -1995 According to the provisions of GB11026.1, the judgment standard of the end of life shall be agreed upon by the supply and demand parties. Inspection rules Mica foil with the same raw materials and process and a continuous production quantity not exceeding 500kg is a batch. Each batch shall be subject to factory test, and the factory test items are the 4th and 5th items in Table 3 of Articles 4.1, 4.2 and 4.3 of this standard. 6.2 Select no less than 5% of the total number of sheets in a batch for inspection according to Article 4.1 and Article 4.2 of this standard, and the inspection of other items shall be taken on the same box. 6.3 The temperature index in Item 6 of Table 3 of Article 4.3 is the product finalization test item. 6.4 Other items shall comply with the provisions of Chapter 2 of GB5020. 7 Marking, packaging, transportation, storage The storage period of mica boxes is three months from the date of leaving the factory. Other items shall comply with the provisions of Chapter 3 of GB5020. 7.2 Additional remarks: This standard is proposed and managed by the National Technical Committee for Standardization of Insulating Materials. This standard is drafted by Shanghai Mica Insulating Materials Factory. The main drafters of this standard are: Li Yuanzhang, Yang Lihua, Gu Haigen, and Zhu Chaying. People's Republic of China Mechanical Industry Standard Mica Foil JB/T901-1995 Published and issued by the Mechanical Science Research Institute Printed by the Mechanical Science Research Institute (No. 2 Shouti South Road, Beijing Format 880×1230 Edition X in xX month, 19XX Printing 1-XXX Postal Code 100044) Print Sheet X/X Number of Words xXXx,xXX Printing X in XX month, 19XX Price XXX.XX Yuan XX-XXX Mechanical Industry Standard Service Network: http://www.JB.ac.cnS661 - 106 /8F Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.