JB/T 9162.39-1999 Guide Bushing Dimensions
Basic Information
Standard ID:
JB/T 9162.39-1999
Standard Name: Guide Bushing Dimensions
Chinese Name:
导套 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.39-1999 JB/T 9162.39-1999 Guide bushing dimensions JB/T9162.39-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999www.bzxz.net
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Bushing
Dimensious
The standard specifies the style and size of the fixture. The style and size are as shown in the figure below.
Marking:
Marking of A-type guide sleeve with a hole diameter of 4mm:
Guide sleeve A4JB/162.3U—1999
Approved by the State Machinery Industry Bureau on 1999-05-20JB/T 916Z.39-[999
ZB J44 001 39 87
Implemented on 2000-01-01
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.