Some standard content:
ICS55.100
Packaging Industry Standard of the People's Republic of China
BB/T00552010
Packaging Containers
Aluminum Water Bottles
Packing containers---Aluminum water bottle2010-04-22Promulgated
Implementation on 2010-10-01
Promulgated by the Ministry of Industry and Information Technology of the People's Republic of Chinahttn:
Announcement of the Ministry of Industry and Information Technology of the People's Republic of China
Engineering Science [2010] No. 96
The Ministry of Industry and Information Technology approved 192 industry standards including "Electron Beam Welding Process Guide" (see the attachment for standard number, name, main contents and starting implementation date), including 80 machinery industry standards, 110 light industry standards and 2 packaging industry standards, which are now announced. The above mechanical industry standards are published by the Machinery Industry Press, the light industry standards are published by the China Light Industry Press, and the packaging industry standards are published by the China Planning Press. Attachment: Standard number, name and starting date of implementation of 2 packaging standards. Ministry of Industry and Information Technology of the People's Republic of China April 22, 2010
htti
Attachment:
Standard number, name and starting date of implementation of 2 packaging standards Standard number
BB/T0054—2010
BB/T0055—2010
Standard name
Vacuum aluminum-plated paper
Packaging container Aluminum drinking bottle
httn ：
normntn
Starting date of implementation
2010-10-01
2010-10-01
Normative references
3Product classification
4Material·
5Requirement·
6Test method
Inspection rules
Marking, packaging, transportation, storage
httn
BB/T 0055—2010
BB/T0055—2010
This standard was proposed by China Packaging Federation. Foreword
This standard was issued by the National Packaging Standardization Technical Committee, and the responsible drafting unit of this standard is Ningbo Hongtang Aerosol Can Factory Packaging Product Quality Supervision and Inspection Center (Guangzhou). The participating drafting organizations of this standard are: Guangzhou Quality Supervision and Inspection Institute, Ningbo Aerosol Manufacturing Company. The main drafters of this standard are: Shen Yingfeng, Yao Xiaoqing, Guo Keyi, Zheng Sizhong, Zheng Haidong, Zhu Liping and Lu Ming. http://foodmate.net1 Scope
Packaging Containers Aluminum Drinking Bottles
BB/T 0055—2010
This standard specifies the product classification, materials, requirements, test methods, inspection rules and marking, packaging, transportation and storage of aluminum drinking bottles (hereinafter referred to as drinking bottles).
This standard applies to drinking bottles of various specifications with a capacity not exceeding 2L for drinking water, beverages and alcoholic beverages. 2 Normative References
The clauses in the following documents are the clauses of this standard through reference in this standard. For any dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties to an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced documents, the latest versions shall apply to this standard. GB/T191 Packaging, storage and transportation marking (GB/T191-.2000, eqVIS0780:1997) CB/T2828.1 Counting sampling inspection procedure Part 1: Sampling plan for batch inspection based on acceptance quality limit (AQL) (GB/T 2828.1--2003, 150 2859-1: 1999, IDT) GB/T2829 Counting sampling procedures and tables for periodic inspection (applicable to the inspection of process stability) CB4805 Hygienic standard for epoxy powder coating on the inner wall of food cans CB/T5009.60 Polyethylene, polystyrene and polyolefin moldings for food packaging: analytical methods for hygienic standards GH/T 5009. 69
Analysis method for hygienic standard of epoxy phenol coating on inner membrane of food can GB/T5009.72Analysis method for hygienic standard of aluminum tableware container CB/T6543Single corrugated paper box and double corrugated paper box for transport packaging (B9685Hygienic standard for additives in food containers and packaging materials CB9687Hygienic standard for polyethylene molded products for food packaging CB 9688
Hygienic standard for polyethylene molded products for food packaging GB9691
CB 9693
CB 11333
Health standard for polyethylene resin for food packagingSanitary standard for polyolefin resin for food packaging
Health standard for aluminum food containers
CB17326
Health standard for rubber-modified acrylonitrile-butadiene-ethylene molded products for food containers and packaging materialsGB/T17338Determination of residual acrylonitrile monomer in leaves of styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-ethylene resins and their molded products for food packaging
TIG/T2947Aluminum backwater Pot rubber seal heat sheet 3 Product classification
3.1 Drinking bottles are divided into coated bottles and oxidized bottles according to the method of surface treatment inside the bottle. 3.2 Drinking bottles are divided into round bottles and special-shaped bottles according to the shape of the bottle body (see Figure 1): Product Partner Europe ht
BB/T0055—2010
(a) Round bottle
Figure 1 Example of drinking bottle shape
(bh) Special-shaped bottle
3.3 Drinking bottles are divided into inner screw type, outer screw type and spring pressure type according to the combination of bottle body and bottle cap (see Figure 2). (a) Internal screw
4 Materials
4.1 Bottle
(h) External screw
Figure 2 Example of bottle body and bottle cap combination
The bottle body of the drinking bottle should be made of aluminum with a purity of not less than 99%. 4.2 Bottle cap
n) High pressure
The hygiene indexes of polyethylene (PE) resin and polypropylene (PP) resin of the raw materials of the bottle cap of the drinking bottle shall comply with the provisions of GB9691 and GB9693 respectively, and the hygiene indexes of acrylonitrile-butadiene-styrene (ABS) resin and other materials shall comply with the provisions of the corresponding hygiene standards. , and the relevant additives shall comply with the provisions of G 9685
4.3 Sealing gasket
The sealing gasket of the drinking bottle shall comply with the provisions of ITG/T2947. 5 Requirements
5.1 Appearance quality
The appearance quality requirements of drinking bottles shall be in accordance with the provisions of Table 1:2
htti
Table 1 Appearance quality
BB/T 0055-2010
The surface shall not have cracks, edges, obvious concave spots and wrinkles; the bottle mouth shall be smooth, the thread shall be clear and fine, and there shall be no unsafe defects such as thorns and sharp edges on the bottle mouth and thread.
The color of the paint film on the outer surface shall be uniform, and there shall be no defects such as bottom exposure, paint flow and other defects; there shall be no obvious color difference in the same color; the paint film shall be complete and not fall off. The printed graphics are clear and complete, consistent with the sample color, and the graphics are accurately overprinted. There should be no obvious scratches on the printed part. The inner surface is treated with epoxy resin coating, and the inner coating is evenly coated. There should be no protrusions, impurities and gas. If the surface is treated with oxidized film, the surface will be smooth and shiny.
The bottle cap has no defects such as cracks, deformation, bubbles, stains, etc. The thread should be flat and smooth, and there should be no missing teeth or rotten teeth. 5.2 Matching performance
The bottle body of the drinking bottle, the bottle cap and the sealing gasket are appropriately matched, and the sealing gasket should not fall off after being installed in the bottle cap. The bottle body, bottle cap and sealing ring of the same model and specification can be matched at will. 5.3 Size specification
The size specification of the drinking bottle shall be agreed upon by the supply and demand parties. 5.3.1 Dimension deviation
Height dimension deviation of drinking bottle: ±1.0mm, geometric dimension deviation of cross section: ±0.3mms5.3.2 Full mouth capacity
The full mouth capacity of drinking bottle shall not be less than 105% of the nominal capacity: 5.4 Coating quality
The coating quality of drinking bottle shall comply with the provisions of Table 2. Table 2 Coating quality
Outer coating film adhesion
Inner film integrity (coated bottle), mAWww.bzxZ.net
Inner surface oxide film thickness (oxidized bottle), um5.5 Heat resistance
After the paint film adhesion test, the coating does not fall off59
After the heat resistance test, the inner and outer coatings of the bottle body do not fall off or wrinkle, and the bottle cap has no cracks, deformation, bubbles and irritating odor. 5.6 Sealing performance
The drinking bottle should not leak after the sealing performance test. 5.7 Hygiene requirements
5.7.1 Bottle body
The hygienic index of the bottle body shall comply with the provisions of GB11333, and the coating material of the bottle body surface shall comply with the provisions of GB4805. 5.7.2 Bottle cap
The hygienic index of polyethylene (PE), polypropylene (PP), and propylene-butadiene-styrene (ABS) of the bottle cap material shall comply with the provisions of GB9687, GB9688, and GB17326 respectively, and other materials shall comply with the provisions of the corresponding hygienic standards. 3
htti
BR/T00552010
6 Test method
6.1 Appearance and matching performance inspection
Use manual and daily measurement methods. Visual inspection environment conditions: should be carried out in natural light or 0.6m away from 40W fluorescent lamp: 6.2 Dimension inspection
Measure with general or special measuring tools (instruments), and the minimum reading value of the measuring tool (instrument) shall not exceed 0.02mm. 6.3 Full capacity test
Use clean water as the test liquid, fill it into the sample bottle until it is level with the mouth, then pour the water in the bottle into the measuring cup and the reading is the full capacity of the sample bottle (or the capacity value can be obtained by weighing and then converting it into volume). 6.4 Test of adhesion of external coating film
Place the special marking gauge at the measuring position, and use the marking knife (paper cutter) to mark the marking gauge 11 times horizontally and 11 times vertically, with a spacing of 1mm. Then stick the adhesive tape (3M610 adhesive tape with a width of 25.4mm) on the concave line, press and rub it with your fingers until it sticks tightly, then tear off the adhesive tape quickly and forcefully to observe the condition of the coating.
6.5 Internal coating integrity test (suitable for coating bottle) Make the minimum reading value not greater than 0.1mA Internal coating integrity tester, connect the bottle body to the positive electrode, add 1% sodium chloride paint solution into the bottle, the liquid level is 20mm away from the bottle mouth, insert a stainless steel rod to connect the negative electrode, ensure that the liquid level is lower than the thread, and read the internal coating trap current value in the 4th second. 6.6 Test of oxide layer thickness (applicable to oxidation): First weigh the sample bottle, then add phosphoric acid-chromic acid solution (dissolve 20g chromium trioxide and 35mL phosphoric acid in water, then dilute to 1000mL) to the sample bottle, keep it in a (97±3)℃ water bath for 20min, take it out, pour out the phosphoric acid-chromic acid solution, then rinse the sample bottle with cold distilled water, place it in a 105% drying oven until dry, cool it and weigh it, calculate the average chloride film thickness of the sample bottle according to formula (1):
Note: The test solution is prepared with analytical pure reagents and distilled water. Formula (1) for calculating oxide film thickness:
Where:
d = (m, -m) ×10s
d-average thickness of oxide film, in micrometers (um); mo-mass of sample before oxide film dissolution, in grams (g); m-mass of sample after oxide film dissolution, in grams (g); A-surface area of oxide film to be tested, in square millimeters (rnm); p-density of oxide film, taken as 2.6 (g/cn) (based on the oxide film after sealing). 6.7 Heat resistance test
After adjusting the electric constant temperature water bath to (95±5)℃, immerse the sample bottle in the water bath, take it out after 10 minutes, and observe the condition of the sample bottle. 6.8 Sealing test
Pour 2/3 of the nominal capacity of the sample bottle into clean water at room temperature, tighten the bottle cap, close the water spout, and move the bottle downward for 10 times. Then, turn the drinking bottle upside down for 1 hour and observe whether there is any water leakage in the sample bottle; then open the water spout, turn the bottle mouth downward, and check whether the water outlet function of the spout is normal.
6.9 Wei Niu performance test
BB/T 0055:2010
The inspection of hygiene indexes shall be carried out in accordance with relevant standards such as GB/T5009.60, GB/T5009.69, GB/T5009.72, GB/T17338, etc. 7 Inspection rules
7.1-A batch of shipments of a model specification is an inspection batch, and a drinking water bottle is a sample unit. 7.2 The quality department of the production enterprise shall inspect the product in accordance with the provisions of this standard and issue a certificate of conformity. 7.3 The inspection of products is divided into factory inspection and type test. 7.4 Inspection
7.4.1 5.1.5.2, 5.4 and 5.6 of this standard are factory inspection items. 7.4.2 Inspection shall be carried out according to the normal inspection-secondary sampling plan in CB/T2828.1. The inspection items, inspection level and acceptance quality limit are shown in Table 3.
Table 3 Factory inspection
7.5 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (S.2)
Paint film adhesion (5.4)
Sealing performance (5.6)
Chapter 5 of this standard is the type test items. Type tests should be conducted in the following situations: new products or old products are transferred to the factory for trial production and identification; when the structure, material, process changes may affect the product performance; once every six months in normal production; when production is resumed after more than six months of suspension; when the factory inspection results are significantly different from the previous type test; when the national quality and technical supervision agency proposes to avoid type testing. The type test is carried out in accordance with the provisions of GB/T2829, using a one-time sampling plan with a discrimination level of 1. The inspection items, unqualified quality levels, sample size, and discrimination array are shown in Table 4. Table 4 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (5.2)
Rejection quality level (RQL)
ht
Sample size"
Judgment array
BB/T 0055
Inspection items
Dimension deviation (5.3.1)
Full mouth penetration (5.3.2)
Paint adhesion (5.4)
Inner coating film integrity (5.4)
Inner surface ammonium film thickness (5.4)
Heat resistance (5.5)
Sealing performance (5.6)
Sanitary requirements (5.7)
Marking, packaging, transportation, storage| |tt||Table 4 (continued)
Rejection quality level (RQI)
Sample size n
Judgment array
The product packaging box should have the product name, specification, quantity, packaging box size, production unit, production date and product certificate, and be marked with "Handle with care" and "Avoid moisture". The marking should comply with the provisions of B/\\191. 8.2 Packaging
8.2.1 The packaging material should be clean and dry, and no foreign smell or dirt is allowed. 8.2.2 The outer packaging of drinking water bottles shall be made of corrugated boxes or according to user requirements. If corrugated boxes are used as outer packaging, they shall meet the requirements of GB/T6543. Products shall be arranged vertically, and the bottles shall be separated by cushioning materials. 8.3 Transportation
The transportation vehicle shall be clean and dry, and no foreign particles or pollution are allowed. During transportation, the goods shall be loaded and unloaded with care, and throwing is strictly prohibited to prevent collision. During transportation, the goods shall be protected from rain, sun exposure, moisture pollution and damage, and shall not be placed in contact with corrosive items. 8.4 Storage
The product should be stored in a dry, ventilated and clean warehouse, free from pollution, damage and direct sunlight, and should not be stored with corrosive items.
httn
S/N:1580177-433
911580171743302
China's Common Packaging Industry Standard
Packing Container Aluminum Drinking Bottle
BB/T (0S5—2010
Published by Zhongyuan Publishing House
【Address: 4th Floor, Guohong Building, No. 11, Muhuidi North Li, Xicheng District, Beijing (Postal Code: 100038 Tel: 6390643363906381) Issued by Xinhuadian Beijing Issuing Office
Sanhe Fuhua Printing and Packaging Cloth Co., Ltd. Printable size 880×1230 m 1/160.75 Sheet 18 Next 1st edition in July 2010 1st printing in July 2010 Number 1—400
Unified book number: 1580177·433
Price: 10.00 yuan
Copyright reserved 1
Infringement will be investigated
htti2 Bottle cap
The hygienic indexes of polyethylene (PE), polypropylene (PP) and propylene-butadiene-styrene (ABS) materials of bottle caps shall comply with the provisions of GB9687, GB9688 and GB17326 respectively, and other materials shall comply with the provisions of the corresponding hygienic standards. 3
htti
BR/T00552010
6 Test methods
6.1 Appearance and matching performance inspection
Use manual and daily measurement methods. Visual inspection environmental conditions: should be carried out in natural light or at a distance of 0.6m from a 40W fluorescent lamp: 6.2 Dimension inspection
Measure with general or special measuring tools (instruments), and the minimum reading value of the measuring tool (instrument) shall not exceed 0.02mm. 6.3 Full capacity test
Use clean water as the test liquid, fill it into the sample bottle until it is level with the mouth, then pour the water in the bottle into the measuring cup and the reading is the full capacity of the sample bottle (or the capacity value can be obtained by weighing and then converting it into volume). 6.4 Test of adhesion of external coating film
Place the special marking gauge at the measuring position, and use the marking knife (paper cutter) to mark the marking gauge 11 times horizontally and 11 times vertically, with a spacing of 1mm. Then stick the adhesive tape (3M610 adhesive tape with a width of 25.4mm) on the concave line, press and rub it with your fingers until it sticks tightly, then tear off the adhesive tape quickly and forcefully to observe the condition of the coating.
6.5 Internal coating integrity test (suitable for coating bottle) Make the minimum reading value not greater than 0.1mA Internal coating integrity tester, connect the bottle body to the positive electrode, add 1% sodium chloride paint solution into the bottle, the liquid level is 20mm away from the bottle mouth, insert a stainless steel rod to connect the negative electrode, ensure that the liquid level is lower than the thread, and read the internal coating trap current value in the 4th second. 6.6 Test of oxide layer thickness (applicable to oxidation): First weigh the sample bottle, then add phosphoric acid-chromic acid solution (dissolve 20g chromium trioxide and 35mL phosphoric acid in water, then dilute to 1000mL) to the sample bottle, keep it in a (97±3)℃ water bath for 20min, take it out, pour out the phosphoric acid-chromic acid solution, then rinse the sample bottle with cold distilled water, place it in a 105% drying oven until dry, cool it and weigh it, calculate the average chloride film thickness of the sample bottle according to formula (1):
Note: The test solution is prepared with analytical pure reagents and distilled water. Formula (1) for calculating oxide film thickness:
Where:
d = (m, -m) ×10s
d-average thickness of oxide film, in micrometers (um); mo-mass of sample before oxide film dissolution, in grams (g); m-mass of sample after oxide film dissolution, in grams (g); A-surface area of oxide film to be tested, in square millimeters (rnm); p-density of oxide film, taken as 2.6 (g/cn) (based on the oxide film after sealing). 6.7 Heat resistance test
After adjusting the electric constant temperature water bath to (95±5)℃, immerse the sample bottle in the water bath, take it out after 10 minutes, and observe the condition of the sample bottle. 6.8 Sealing test
Pour 2/3 of the nominal capacity of the sample bottle into clean water at room temperature, tighten the bottle cap, close the water spout, and move the bottle downward for 10 times. Then, turn the drinking bottle upside down for 1 hour and observe whether there is any water leakage in the sample bottle; then open the water spout, turn the bottle mouth downward, and check whether the water outlet function of the spout is normal.
6.9 Wei Niu performance test
BB/T 0055:2010
The inspection of hygiene indexes shall be carried out in accordance with relevant standards such as GB/T5009.60, GB/T5009.69, GB/T5009.72, GB/T17338, etc. 7 Inspection rules
7.1-A batch of shipments of a model specification is an inspection batch, and a drinking water bottle is a sample unit. 7.2 The quality department of the production enterprise shall inspect the product in accordance with the provisions of this standard and issue a certificate of conformity. 7.3 The inspection of products is divided into factory inspection and type test. 7.4 Inspection
7.4.1 5.1.5.2, 5.4 and 5.6 of this standard are factory inspection items. 7.4.2 Inspection shall be carried out according to the normal inspection-secondary sampling plan in CB/T2828.1. The inspection items, inspection level and acceptance quality limit are shown in Table 3.
Table 3 Factory inspection
7.5 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (S.2)
Paint film adhesion (5.4)
Sealing performance (5.6)
Chapter 5 of this standard is the type test items. Type tests should be conducted in the following situations: new products or old products are transferred to the factory for trial production and identification; when the structure, material, process changes may affect the product performance; once every six months in normal production; when production is resumed after more than six months of suspension; when the factory inspection results are significantly different from the previous type test; when the national quality and technical supervision agency proposes to avoid type testing. The type test is carried out in accordance with the provisions of GB/T2829, using a one-time sampling plan with a discrimination level of 1. The inspection items, unqualified quality levels, sample size, and discrimination array are shown in Table 4. Table 4 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (5.2)
Rejection quality level (RQL)
ht
Sample size"
Judgment array
BB/T 0055
Inspection items
Dimension deviation (5.3.1)
Full mouth penetration (5.3.2)
Paint adhesion (5.4)
Integrity of internal coating film (5.4)
Thickness of internal surface ammonium film (5.4)
Heat resistance (5.5)
Sealing performance (5.6)
Sanitary requirements (5.7)
Marking, packaging, transportation, storage| |tt||Table 4 (continued)
Rejection quality level (RQI)
Sample size n
Judgment array
The product packaging box should have the product name, specification, quantity, packaging box size, production unit, production date and product certificate, and be marked with "Handle with care" and "Avoid moisture". The marking should comply with the provisions of B/\\191. 8.2 Packaging
8.2.1 The packaging material should be clean and dry, and no foreign smell or dirt is allowed. 8.2.2 The outer packaging of drinking water bottles shall be made of corrugated boxes or according to user requirements. If corrugated boxes are used as outer packaging, they shall meet the requirements of GB/T6543. Products shall be arranged vertically, and the bottles shall be separated by cushioning materials. 8.3 Transportation
The transportation vehicle shall be clean and dry, and no foreign particles or pollution are allowed. During transportation, the goods shall be loaded and unloaded with care, and throwing is strictly prohibited to prevent collision. During transportation, the goods shall be protected from rain, sun exposure, moisture pollution and damage, and shall not be placed in contact with corrosive items. 8.4 Storage
The product should be stored in a dry, ventilated and clean warehouse, free from pollution, damage and direct sunlight, and should not be stored with corrosive items.
httn
S/N:1580177-433
911580171743302
China's Common Packaging Industry Standard
Packing Container Aluminum Drinking Bottle
BB/T (0S5—2010
Published by Zhongyuan Publishing House
【Address: 4th Floor, Guohong Building, No. 11, Muhuidi North Li, Xicheng District, Beijing (Postal Code: 100038 Tel: 6390643363906381) Issued by Xinhuadian Beijing Issuing Office
Sanhe Fuhua Printing and Packaging Cloth Co., Ltd. Printable size 880×1230 m 1/160.75 Sheet 18 Next 1st edition in July 2010 1st printing in July 2010 Number 1—400
Unified book number: 1580177·433
Price: 10.00 yuan
Copyright reserved 1
Infringement will be investigated
htti2 Bottle cap
The hygienic indexes of polyethylene (PE), polypropylene (PP) and propylene-butadiene-styrene (ABS) materials of bottle caps shall comply with the provisions of GB9687, GB9688 and GB17326 respectively, and other materials shall comply with the provisions of the corresponding hygienic standards. 3
htti
BR/T00552010
6 Test methods
6.1 Appearance and matching performance inspection
Use manual and daily measurement methods. Visual inspection environmental conditions: should be carried out in natural light or at a distance of 0.6m from a 40W fluorescent lamp: 6.2 Dimension inspection
Measure with general or special measuring tools (instruments), and the minimum reading value of the measuring tool (instrument) shall not exceed 0.02mm. 6.3 Full capacity test
Use clean water as the test liquid, fill it into the sample bottle until it is level with the mouth, then pour the water in the bottle into the measuring cup and the reading is the full capacity of the sample bottle (or the capacity value can be obtained by weighing and then converting it into volume). 6.4 Test of adhesion of external coating film
Place the special marking gauge at the measuring position, and use the marking knife (paper cutter) to mark the marking gauge 11 times horizontally and 11 times vertically, with a spacing of 1mm. Then stick the adhesive tape (3M610 adhesive tape with a width of 25.4mm) on the concave line, press and rub it with your fingers until it sticks tightly, then tear off the adhesive tape quickly and forcefully to observe the condition of the coating.
6.5 Internal coating integrity test (suitable for coating bottle) Make the minimum reading value not greater than 0.1mA Internal coating integrity tester, connect the bottle body to the positive electrode, add 1% sodium chloride paint solution into the bottle, the liquid level is 20mm away from the bottle mouth, insert a stainless steel rod to connect the negative electrode, ensure that the liquid level is lower than the thread, and read the internal coating trap current value in the 4th second. 6.6 Test of oxide layer thickness (applicable to oxidation): First weigh the sample bottle, then add phosphoric acid-chromic acid solution (dissolve 20g chromium trioxide and 35mL phosphoric acid in water, then dilute to 1000mL) to the sample bottle, keep it in a (97±3)℃ water bath for 20min, take it out, pour out the phosphoric acid-chromic acid solution, then rinse the sample bottle with cold distilled water, place it in a 105% drying oven until dry, cool it and weigh it, calculate the average chloride film thickness of the sample bottle according to formula (1):
Note: The test solution is prepared with analytical pure reagents and distilled water. Formula (1) for calculating oxide film thickness:
Where:
d = (m, -m) ×10s
d-average thickness of oxide film, in micrometers (um); mo-mass of sample before oxide film dissolution, in grams (g); m-mass of sample after oxide film dissolution, in grams (g); A-surface area of oxide film to be tested, in square millimeters (rnm); p-density of oxide film, taken as 2.6 (g/cn) (based on the oxide film after sealing). 6.7 Heat resistance test
After adjusting the electric constant temperature water bath to (95±5)℃, immerse the sample bottle in the water bath, take it out after 10 minutes, and observe the condition of the sample bottle. 6.8 Sealing test
Pour 2/3 of the nominal capacity of the sample bottle into clean water at room temperature, tighten the bottle cap, close the water spout, and move the bottle downward for 10 times. Then, turn the drinking bottle upside down for 1 hour and observe whether there is any water leakage in the sample bottle; then open the water spout, turn the bottle mouth downward, and check whether the water outlet function of the spout is normal.
6.9 Wei Niu performance test
BB/T 0055:2010
The inspection of hygiene indexes shall be carried out in accordance with relevant standards such as GB/T5009.60, GB/T5009.69, GB/T5009.72, GB/T17338, etc. 7 Inspection rules
7.1-A batch of shipments of a model specification is an inspection batch, and a drinking water bottle is a sample unit. 7.2 The quality department of the production enterprise shall inspect the product in accordance with the provisions of this standard and issue a certificate of conformity. 7.3 The inspection of products is divided into factory inspection and type test. 7.4 Inspection
7.4.1 5.1.5.2, 5.4 and 5.6 of this standard are factory inspection items. 7.4.2 Inspection shall be carried out according to the normal inspection-secondary sampling plan in CB/T2828.1. The inspection items, inspection level and acceptance quality limit are shown in Table 3.
Table 3 Factory inspection
7.5 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (S.2)
Paint film adhesion (5.4)
Sealing performance (5.6)
Chapter 5 of this standard is the type test items. Type tests should be conducted in the following situations: new products or old products are transferred to the factory for trial production and identification; when the structure, material, process changes may affect the product performance; once every six months in normal production; when production is resumed after more than six months of suspension; when the factory inspection results are significantly different from the previous type test; when the national quality and technical supervision agency proposes to avoid type testing. The type test is carried out in accordance with the provisions of GB/T2829, using a one-time sampling plan with a discrimination level of 1. The inspection items, unqualified quality levels, sample size, and discrimination array are shown in Table 4. Table 4 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (5.2)
Rejection quality level (RQL)
ht
Sample size"
Judgment array
BB/T 0055
Inspection items
Dimension deviation (5.3.1)
Full mouth penetration (5.3.2)
Paint adhesion (5.4)
Inner coating film integrity (5.4)
Inner surface ammonium film thickness (5.4)
Heat resistance (5.5)
Sealing performance (5.6)
Sanitary requirements (5.7)
Marking, packaging, transportation, storage| |tt||Table 4 (continued)
Rejection quality level (RQI)
Sample size n
Judgment array
The product packaging box should have the product name, specification, quantity, packaging box size, production unit, production date and product certificate, and be marked with "Handle with care" and "Avoid moisture". The marking should comply with the provisions of B/\\191. 8.2 Packaging
8.2.1 The packaging material should be clean and dry, and no foreign smell or dirt is allowed. 8.2.2 The outer packaging of drinking water bottles shall be made of corrugated boxes or according to user requirements. If corrugated boxes are used as outer packaging, they shall meet the requirements of GB/T6543. Products shall be arranged vertically, and the bottles shall be separated by cushioning materials. 8.3 Transportation
The transportation vehicle shall be clean and dry, and no foreign particles or pollution are allowed. During transportation, the goods shall be loaded and unloaded with care, and throwing is strictly prohibited to prevent collision. During transportation, the goods shall be protected from rain, sun exposure, moisture pollution and damage, and shall not be placed in contact with corrosive items. 8.4 Storage
The product should be stored in a dry, ventilated and clean warehouse, free from pollution, damage and direct sunlight, and should not be stored with corrosive items.
httn
S/N:1580177-433
911580171743302
China's Common Packaging Industry Standard
Packing Container Aluminum Drinking Bottle
BB/T (0S5—2010
Published by Zhongyuan Publishing House
【Address: 4th Floor, Guohong Building, No. 11, Muhuidi North Li, Xicheng District, Beijing (Postal Code: 100038 Tel: 6390643363906381) Issued by Xinhuadian Beijing Issuing Office
Sanhe Fuhua Printing and Packaging Cloth Co., Ltd. Printable size 880×1230 m 1/160.75 Sheet 18 Next 1st edition in July 2010 1st printing in July 2010 Number 1—400
Unified book number: 1580177·433
Price: 10.00 yuan
Copyright reserved 1
Infringement will be investigated
htti4 Test of adhesion of external coating film
Place the special marking gauge at the measuring position, and use the marking knife (paper cutter) to mark the gauge 11 times horizontally and 11 times vertically, with a spacing of 1mm. Then stick the adhesive tape (3M610 adhesive tape with a width of 25.4mm) to the concave marking line, press and rub it with your fingers, and then tear off the adhesive tape quickly and observe the coating condition
6.5 Test of the integrity of the internal coating film (suitable for coating bottles) Make the minimum reading value not greater than 0.1mA. Connect the bottle to the positive electrode, add 1% sodium chloride paint liquid to the bottle, and the liquid level is 20mm from the bottle mouth. Insert a stainless steel rod to connect to the negative electrode, ensure that the liquid level is lower than the thread, and read the internal coating film sink current value in the 4th second. 6.6 Test of oxide layer thickness (applicable to oxidation): First weigh the sample bottle, then add phosphoric acid-chromic acid solution (dissolve 20g chromium trioxide and 35mL phosphoric acid in water, then dilute to 1000mL) to the sample bottle, keep it in a (97±3)℃ water bath for 20min, take it out, pour out the phosphoric acid-chromic acid solution, then rinse the sample bottle with cold distilled water, place it in a 105% drying oven until dry, cool it and weigh it, calculate the average chloride film thickness of the sample bottle according to formula (1):
Note: The test solution is prepared with analytical pure reagents and distilled water. Formula (1) for calculating oxide film thickness:
Where:
d = (m, -m) ×10s
d-average thickness of oxide film, in micrometers (um); mo-mass of sample before oxide film dissolution, in grams (g); m-mass of sample after oxide film dissolution, in grams (g); A-surface area of oxide film to be tested, in square millimeters (rnm); p-density of oxide film, taken as 2.6 (g/cn) (based on the oxide film after sealing). 6.7 Heat resistance test
After adjusting the electric constant temperature water bath to (95±5)℃, immerse the sample bottle in the water bath, take it out after 10 minutes, and observe the condition of the sample bottle. 6.8 Sealing test
Pour 2/3 of the nominal capacity of the sample bottle into clean water at room temperature, tighten the bottle cap, close the water spout, and move the bottle downward for 10 times. Then, turn the drinking bottle upside down for 1 hour and observe whether there is any water leakage in the sample bottle; then open the water spout, turn the bottle mouth downward, and check whether the water outlet function of the spout is normal.
6.9 Wei Niu performance test
BB/T 0055:2010
The inspection of hygiene indexes shall be carried out in accordance with relevant standards such as GB/T5009.60, GB/T5009.69, GB/T5009.72, GB/T17338, etc. 7 Inspection rules
7.1-A batch of shipments of a model specification is an inspection batch, and a drinking water bottle is a sample unit. 7.2 The quality department of the production enterprise shall inspect the product in accordance with the provisions of this standard and issue a certificate of conformity. 7.3 The inspection of products is divided into factory inspection and type test. 7.4 Inspection
7.4.1 5.1.5.2, 5.4 and 5.6 of this standard are factory inspection items. 7.4.2 Inspection shall be carried out according to the normal inspection-secondary sampling plan in CB/T2828.1. The inspection items, inspection level and acceptance quality limit are shown in Table 3.
Table 3 Factory inspection
7.5 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (S.2)
Paint film adhesion (5.4)
Sealing performance (5.6)
Chapter 5 of this standard is the type test items. Type tests should be conducted in the following situations: new products or old products are transferred to the factory for trial production and identification; when the structure, material, process changes may affect the product performance; once every six months in normal production; when production is resumed after more than six months of suspension; when the factory inspection results are significantly different from the previous type test; when the national quality and technical supervision agency proposes to avoid type testing. The type test is carried out in accordance with the provisions of GB/T2829, using a one-time sampling plan with a discrimination level of 1. The inspection items, unqualified quality levels, sample size, and discrimination array are shown in Table 4. Table 4 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (5.2)
Rejection quality level (RQL)
ht
Sample size"
Judgment array
BB/T 0055
Inspection items
Dimension deviation (5.3.1)
Full mouth penetration (5.3.2)
Paint adhesion (5.4)
Inner coating film integrity (5.4)
Inner surface ammonium film thickness (5.4)
Heat resistance (5.5)
Sealing performance (5.6)
Sanitary requirements (5.7)
Marking, packaging, transportation, storage| |tt||Table 4 (continued)
Rejection quality level (RQI)
Sample size n
Judgment array
The product packaging box should have the product name, specification, quantity, packaging box size, production unit, production date and product certificate, and be marked with "Handle with care" and "Avoid moisture". The marking should comply with the provisions of B/\\191. 8.2 Packaging
8.2.1 The packaging material should be clean and dry, and no foreign smell or dirt is allowed. 8.2.2 The outer packaging of drinking water bottles shall be made of corrugated boxes or according to user requirements. If corrugated boxes are used as outer packaging, they shall meet the requirements of GB/T6543. Products shall be arranged vertically, and the bottles shall be separated by cushioning materials. 8.3 Transportation
The transportation vehicle shall be clean and dry, and no foreign particles or pollution are allowed. During transportation, the goods shall be loaded and unloaded with care, and throwing is strictly prohibited to prevent collision. During transportation, the goods shall be protected from rain, sun exposure, moisture pollution and damage, and shall not be placed in contact with corrosive items. 8.4 Storage
The product should be stored in a dry, ventilated and clean warehouse, free from pollution, damage and direct sunlight, and should not be stored with corrosive items.
httn
S/N:1580177-433
911580171743302
China's Common Packaging Industry Standard
Packing Container Aluminum Drinking Bottle
BB/T (0S5—2010
Published by Zhongyuan Publishing House
【Address: 4th Floor, Guohong Building, No. 11, Muhuidi North Li, Xicheng District, Beijing (Postal Code: 100038 Tel: 6390643363906381) Issued by Xinhuadian Beijing Issuing Office
Sanhe Fuhua Printing and Packaging Cloth Co., Ltd. Printable size 880×1230 m 1/160.75 Sheet 18 Next 1st edition in July 2010 1st printing in July 2010 Number 1—400
Unified book number: 1580177·433
Price: 10.00 yuan
Copyright reserved 1
Infringement will be investigated
htti4 Test of adhesion of external coating film
Place the special marking gauge at the measuring position, and use the marking knife (paper cutter) to mark the gauge 11 times horizontally and 11 times vertically, with a spacing of 1mm. Then stick the adhesive tape (3M610 adhesive tape with a width of 25.4mm) to the concave marking line, press and rub it with your fingers, and then tear off the adhesive tape quickly and observe the coating condition
6.5 Test of the integrity of the internal coating film (suitable for coating bottles) Make the minimum reading value not greater than 0.1mA. Connect the bottle to the positive electrode, add 1% sodium chloride paint liquid to the bottle, and the liquid level is 20mm from the bottle mouth. Insert a stainless steel rod to connect to the negative electrode, ensure that the liquid level is lower than the thread, and read the internal coating film sink current value in the 4th second. 6.6 Test of oxide layer thickness (applicable to oxidation): First weigh the sample bottle, then add phosphoric acid-chromic acid solution (dissolve 20g chromium trioxide and 35mL phosphoric acid in water, then dilute to 1000mL) to the sample bottle, keep it in a (97±3)℃ water bath for 20min, take it out, pour out the phosphoric acid-chromic acid solution, then rinse the sample bottle with cold distilled water, place it in a 105% drying oven until dry, cool it and weigh it, calculate the average chloride film thickness of the sample bottle according to formula (1):
Note: The test solution is prepared with analytical pure reagents and distilled water. Formula (1) for calculating oxide film thickness:
Where:
d = (m, -m) ×10s
d-average thickness of oxide film, in micrometers (um); mo-mass of sample before oxide film dissolution, in grams (g); m-mass of sample after oxide film dissolution, in grams (g); A-surface area of oxide film to be tested, in square millimeters (rnm); p-density of oxide film, taken as 2.6 (g/cn) (based on the oxide film after sealing). 6.7 Heat resistance test
After adjusting the electric constant temperature water bath to (95±5)℃, immerse the sample bottle in the water bath, take it out after 10 minutes, and observe the condition of the sample bottle. 6.8 Sealing test
Pour 2/3 of the nominal capacity of the sample bottle into clean water at room temperature, tighten the bottle cap, close the water spout, and move the bottle downward for 10 times. Then, turn the drinking bottle upside down for 1 hour and observe whether there is any water leakage in the sample bottle; then open the water spout, turn the bottle mouth downward, and check whether the water outlet function of the spout is normal.
6.9 Wei Niu performance test
BB/T 0055:2010
The inspection of hygiene indexes shall be carried out in accordance with relevant standards such as GB/T5009.60, GB/T5009.69, GB/T5009.72, GB/T17338, etc. 7 Inspection rules
7.1-A batch of shipments of a model specification is an inspection batch, and a drinking water bottle is a sample unit. 7.2 The quality department of the production enterprise shall inspect the product in accordance with the provisions of this standard and issue a certificate of conformity. 7.3 The inspection of products is divided into factory inspection and type test. 7.4 Inspection
7.4.1 5.1.5.2, 5.4 and 5.6 of this standard are factory inspection items. 7.4.2 Inspection shall be carried out according to the normal inspection-secondary sampling plan in CB/T2828.1. The inspection items, inspection level and acceptance quality limit are shown in Table 3.
Table 3 Factory inspection
7.5 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (S.2)
Paint film adhesion (5.4)
Sealing performance (5.6)
Chapter 5 of this standard is the type test items. Type tests should be conducted in the following situations: new products or old products are transferred to the factory for trial production and identification; when the structure, material, process changes may affect the product performance; once every six months in normal production; when production is resumed after more than six months of suspension; when the factory inspection results are significantly different from the previous type test; when the national quality and technical supervision agency proposes to avoid type testing. The type test is carried out in accordance with the provisions of GB/T2829, using a one-time sampling plan with a discrimination level of 1. The inspection items, unqualified quality levels, sample size, and discrimination array are shown in Table 4. Table 4 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (5.2)
Rejection quality level (RQL)
ht
Sample size"
Judgment array
BB/T 0055
Inspection items
Dimension deviation (5.3.1)
Full mouth penetration (5.3.2)
Paint adhesion (5.4)
Inner coating film integrity (5.4)
Inner surface ammonium film thickness (5.4)
Heat resistance (5.5)
Sealing performance (5.6)
Sanitary requirements (5.7)
Marking, packaging, transportation, storage| |tt||Table 4 (continued)
Rejection quality level (RQI)
Sample size n
Judgment array
The product packaging box should have the product name, specification, quantity, packaging box size, production unit, production date and product certificate, and be marked with "Handle with care" and "Avoid moisture". The marking should comply with the provisions of B/\\191. 8.2 Packaging
8.2.1 The packaging material should be clean and dry, and no foreign smell or dirt is allowed. 8.2.2 The outer packaging of drinking water bottles shall be made of corrugated boxes or according to user requirements. If corrugated boxes are used as outer packaging, they shall meet the requirements of GB/T6543. Products shall be arranged vertically, and the bottles shall be separated by cushioning materials. 8.3 Transportation
The transportation vehicle shall be clean and dry, and no foreign particles or pollution are allowed. During transportation, the goods shall be loaded and unloaded with care, and throwing is strictly prohibited to prevent collision. During transportation, the goods shall be protected from rain, sun exposure, moisture pollution and damage, and shall not be placed in contact with corrosive items. 8.4 Storage
The product should be stored in a dry, ventilated and clean warehouse, free from pollution, damage and direct sunlight, and should not be stored with corrosive items.
httn
S/N:1580177-433
911580171743302
China's Common Packaging Industry Standard
Packing Container Aluminum Drinking Bottle
BB/T (0S5—2010
Published by Zhongyuan Publishing House
【Address: 4th Floor, Guohong Building, No. 11, Muhuidi North Li, Xicheng District, Beijing (Postal Code: 100038 Tel: 6390643363906381) Issued by Xinhuadian Beijing Issuing Office
Sanhe Fuhua Printing and Packaging Cloth Co., Ltd. Printable size 880×1230 m 1/160.75 Sheet 18 Next 1st edition in July 2010 1st printing in July 2010 Number 1—400
Unified book number: 1580177·433
Price: 10.00 yuan
Copyright reserved 1
Infringement will be investigated
htti-m) ×10s
d-average thickness of oxide film, in micrometers (um); mo-mass of sample before oxide film dissolution, in grams (g); m-mass of sample after oxide film dissolution, in grams (g); A-surface area of oxide film to be tested, in square millimeters (rnm); p-density of oxide film, taken as 2.6 (g/cn) (based on the oxide film after sealing). 6.7 Heat resistance test
After adjusting the electric constant temperature water bath to (95±5)℃, immerse the sample bottle in the water bath, take it out after 10 minutes, and observe the condition of the sample bottle. 6.8 Sealing test
Pour 2/3 of the nominal capacity of the sample bottle into clean water at room temperature, tighten the bottle cap, close the water spout, and move the bottle downward for 10 times. Then, turn the drinking bottle upside down for 1 hour and observe whether there is any water leakage in the sample bottle; then open the water spout, turn the bottle mouth downward, and check whether the water outlet function of the spout is normal.
6.9 Wei Niu performance test
BB/T 0055:2010
The inspection of hygiene indexes shall be carried out in accordance with relevant standards such as GB/T5009.60, GB/T5009.69, GB/T5009.72, GB/T17338, etc. 7 Inspection rules
7.1-A batch of shipments of a model specification is an inspection batch, and a drinking water bottle is a sample unit. 7.2 The quality department of the production enterprise shall inspect the product in accordance with the provisions of this standard and issue a certificate of conformity. 7.3 The inspection of products is divided into factory inspection and type test. 7.4 Inspection
7.4.1 5.1.5.2, 5.4 and 5.6 of this standard are factory inspection items. 7.4.2 Inspection shall be carried out according to the normal inspection-secondary sampling plan in CB/T2828.1. The inspection items, inspection level and acceptance quality limit are shown in Table 3.
Table 3 Factory inspection
7.5 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (S.2)
Paint film adhesion (5.4)
Sealing performance (5.6)
Chapter 5 of this standard is the type test items. Type tests should be conducted in the following situations: new products or old products are transferred to the factory for trial production and identification; when the structure, material, process changes may affect the product performance; once every six months in normal production; when production is resumed after more than six months of suspension; when the factory inspection results are significantly different from the previous type test; when the national quality and technical supervision agency proposes to avoid type testing. The type test is carried out in accordance with the provisions of GB/T2829, using a one-time sampling plan with a discrimination level of 1. The inspection items, unqualified quality levels, sample size, and discrimination array are shown in Table 4. Table 4 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (5.2)
Rejection quality level (RQL)
ht
Sample size"
Judgment array
BB/T 0055
Inspection items
Dimension deviation (5.3.1)
Full mouth penetration (5.3.2)
Paint adhesion (5.4)
Inner coating film integrity (5.4)
Inner surface ammonium film thickness (5.4)
Heat resistance (5.5)
Sealing performance (5.6)
Sanitary requirements (5.7)
Marking, packaging, transportation, storage| |tt||Table 4 (continued)
Rejection quality level (RQI)
Sample size n
Judgment array
The product packaging box should have the product name, specification, quantity, packaging box size, production unit, production date and product certificate, and be marked with "Handle with care" and "Avoid moisture". The marking should comply with the provisions of B/\\191. 8.2 Packaging
8.2.1 The packaging material should be clean and dry, and no foreign smell or dirt is allowed. 8.2.2 The outer packaging of drinking water bottles shall be made of corrugated boxes or according to user requirements. If corrugated boxes are used as outer packaging, they shall meet the requirements of GB/T6543. Products shall be arranged vertically, and the bottles shall be separated by cushioning materials. 8.3 Transportation
The transportation vehicle shall be clean and dry, and no foreign particles or pollution are allowed. During transportation, the goods shall be loaded and unloaded with care, and throwing is strictly prohibited to prevent collision. During transportation, the goods shall be protected from rain, sun exposure, moisture pollution and damage, and shall not be placed in contact with corrosive items. 8.4 Storage
The product should be stored in a dry, ventilated and clean warehouse, free from pollution, damage and direct sunlight, and should not be stored with corrosive items.
httn
S/N:1580177-433
911580171743302
China's Common Packaging Industry Standard
Packing Container Aluminum Drinking Bottle
BB/T (0S5—2010
Published by Zhongyuan Publishing House
【Address: 4th Floor, Guohong Building, No. 11, Muhuidi North Li, Xicheng District, Beijing (Postal Code: 100038 Tel: 6390643363906381) Issued by Xinhuadian Beijing Issuing Office
Sanhe Fuhua Printing and Packaging Cloth Co., Ltd. Printable size 880×1230 m 1/160.75 Sheet 18 Next 1st edition in July 2010 1st printing in July 2010 Number 1—400
Unified book number: 1580177·433
Price: 10.00 yuan
Copyright reserved 1
Infringement will be investigated
htti-m) ×10s
d-average thickness of oxide film, in micrometers (um); mo-mass of sample before oxide film dissolution, in grams (g); m-mass of sample after oxide film dissolution, in grams (g); A-surface area of oxide film to be tested, in square millimeters (rnm); p-density of oxide film, taken as 2.6 (g/cn) (based on the oxide film after sealing). 6.7 Heat resistance test
After adjusting the electric constant temperature water bath to (95±5)℃, immerse the sample bottle in the water bath, take it out after 10 minutes, and observe the condition of the sample bottle. 6.8 Sealing test
Pour 2/3 of the nominal capacity of the sample bottle into clean water at room temperature, tighten the bottle cap, close the water spout, and move the bottle downward for 10 times. Then, turn the drinking bottle upside down for 1 hour and observe whether there is any water leakage in the sample bottle; then open the water spout, turn the bottle mouth downward, and check whether the water outlet function of the spout is normal.
6.9 Wei Niu performance test
BB/T 0055:2010
The inspection of hygiene indexes shall be carried out in accordance with relevant standards such as GB/T5009.60, GB/T5009.69, GB/T5009.72, GB/T17338, etc. 7 Inspection rules
7.1-A batch of shipments of a model specification is an inspection batch, and a drinking water bottle is a sample unit. 7.2 The quality department of the production enterprise shall inspect the product in accordance with the provisions of this standard and issue a certificate of conformity. 7.3 The inspection of products is divided into factory inspection and type test. 7.4 Inspection
7.4.1 5.1.5.2, 5.4 and 5.6 of this standard are factory inspection items. 7.4.2 Inspection shall be carried out according to the normal inspection-secondary sampling plan in CB/T2828.1. The inspection items, inspection level and acceptance quality limit are shown in Table 3.
Table 3 Factory inspection
7.5 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (S.2)
Paint film adhesion (5.4)
Sealing performance (5.6)
Chapter 5 of this standard is the type test items. Type tests should be conducted in the following situations: new products or old products are transferred to the factory for trial production and identification; when the structure, material, process changes may affect the product performance; once every six months in normal production; when production is resumed after more than six months of suspension; when the factory inspection results are significantly different from the previous type test; when the national quality and technical supervision agency proposes to avoid type testing. The type test is carried out in accordance with the provisions of GB/T2829, using a one-time sampling plan with a discrimination level of 1. The inspection items, unqualified quality levels, sample size, and discrimination array are shown in Table 4. Table 4 Type test
Inspection items
Appearance quality (5.1)
Fitting performance (5.2)
Rejection quality level (RQL)
ht
Sample size"
Judgment array
BB/T 0055
Inspection items
Dimension deviation (5.3.1)
Full mouth penetration (5.3.2)
Paint adhesion (5.4)
Inner coating film integrity (5.4)
Inner surface ammonium film thickness (5.4)
Heat resistance (5.5)
Sealing performance (5.6)
Sanitary requirements (5.7)
Marking, packaging, transportation, storage| |tt||Table 4 (continued)
Rejection quality level (RQI)
Sample size n
Judgment array
The product packaging box should have the product name, specification, quantity, packaging box size, production unit, production date and product certificate, and be marked with "Handle with care" and "Avoid moisture". The marking should comply with the provisions of B/\\191. 8.2 Packaging
8.2.1 The packaging material should be clean and dry, and no foreign smell or dirt is allowed. 8.2.2 The outer packaging of drinking water bottles shall be made of corrugated boxes or according to user requirements. If corrugated boxes are used as outer packaging, they shall meet the requirements of GB/T6543. Products shall be arranged vertically, and the bottles shall be separated by cushioning materials. 8.3 Transportation
The transportation vehicle shall be clean and dry, and no foreign particles or pollution are allowed. During transportation, the goods shall be loaded and unloaded with care, and throwing is strictly prohibited to prevent collision. During transportation, the goods shall be protected from rain, sun exposure, moisture pollution and damage, and shall not be placed in contact with corrosive items. 8.4 Storage
The product should be stored in a dry, ventilated and clean warehouse, free from pollution, damage and direct sunlight, and should not be stored with corrosive items.
httn
S/N:1580177-433
911580171743302
China's Common Packaging Industry Standard
Packing Container Aluminum Drinking Bottle
BB/T (0S5—2010
Published by Zhongyuan Publishing House
【Address: 4th Floor, Guohong Building, No. 11, Muhuidi North Li, Xicheng District, Beijing (Postal Code: 100038 Tel: 6390643363906381) Issued by Xinhuadian Beijing Issuing Office
Sanhe Fuhua Printing and Packaging Cloth Co., Ltd. Printable size 880×1230 m 1/160.75 Sheet 18 Next 1st edition in July 2010 1st printing in July 2010 Number 1—400
Unified book number: 1580177·433
Price: 10.00 yuan
Copyright reserved 1
Infringement will be investigated
htti1)
Full mouth penetration (5.3.2)
Paint adhesion (5.4)
Inner coating film integrity (5.4)
Inner surface ammonium film thickness (5.4)
Heat resistance (5.5)
Sealing performance (5.6)
Sanitary requirements (5.7)
Marking, packaging, transportation, storage
Table 4 (continued)
Rejection quality level (RQI)
Sample size n
Judgment array
The product packaging box should have the product name, specification, quantity, packaging box size, production unit, production date and product certificate, and be marked with "Handle with care" and "Avoid moisture". The marking should comply with the provisions of B/\\191. 8.2 Packaging
8.2.1 Packaging materials should be clean, dry, and not allowed to have peculiar smell and pollution. 8.2.2 The outer packaging of drinking water bottles shall be made of corrugated boxes or according to user requirements. If corrugated boxes are used as outer packaging, the corrugated boxes shall meet the requirements of GB/T6543. The products shall be arranged vertically, and the bottles shall be separated by cushioning materials. 8.3 Transportation
The means of transportation shall be clean and dry, and no foreign particles or pollution shall be allowed. During transportation, loading and unloading shall be done gently. Throwing is strictly prohibited to prevent collision. During transportation, rain, exposure to the sun, moisture pollution and damage shall be avoided, and it shall not be shipped with corrosive items. 8.4 Storage
The products shall be stored in a dry, ventilated and clean warehouse, and shall not be polluted, damaged or exposed to direct sunlight. They shall not be stored together with corrosive items.
httn
S/N:1580177-433
911580171743302
China's Common Packaging Industry Standard
Packing Container Aluminum Drinking Bottle
BB/T (0S5-2010
Published by China Publishing House
【Address: 4th Floor, Guohong Building, No. 11, Muhuidi North Lane, Xicheng District, Beijing (Postal Code: 100038 Tel: 6390643363906381) Issued by Beijing Xinhua Store
Sanhe Fuhua Printing and Packaging Cloth Co., Ltd. Printable 880×1230 m 1/160.75 Sheet 18 down July 2010 1st Edition July 2010 1st Printing quantity is 1-400
Uniform book number: 1580177·433
Price: 10.00 yuan
Copyright 1
Infringement will be investigated
htti1)
Full mouth penetration (5.3.2)
Paint adhesion (5.4)
Inner coating film integrity (5.4)
Inner surface ammonium film thickness (5.4)
Heat resistance (5.5)
Sealing performance (5.6)
Sanitary requirements (5.7)
Marking, packaging, transportation, storage
Table 4 (continued)
Rejection quality level (RQI)
Sample size n
Judgment array
The product packaging box should have the product name, specification, quantity, packaging box size, production unit, production date and product certificate, and be marked with "Handle with care" and "Avoid moisture". The marking should comply with the provisions of B/\\191. 8.2 Packaging
8.2.1 Packaging materials should be clean, dry, and not allowed to have peculiar smell and pollution. 8.2.2 The outer packaging of drinking water bottles shall be made of corrugated boxes or according to user requirements. If corrugated boxes are used as outer packaging, the corrugated boxes shall meet the requirements of GB/T6543. The products shall be arranged vertically, and the bottles shall be separated by cushioning materials. 8.3 Transportation
The means of transportation shall be clean and dry, and no foreign particles or pollution shall be allowed. During transportation, loading and unloading shall be done gently. Throwing is strictly prohibited to prevent collision. During transportation, rain, exposure to the sun, moisture pollution and damage shall be avoided, and it shall not be shipped with corrosive items. 8.4 Storage
The products shall be stored in a dry, ventilated and clean warehouse, and shall not be polluted, damaged or exposed to direct sunlight. They shall not be stored together with corrosive items.
httn
S/N:1580177-433
911580171743302
China's Common Packaging Industry Standard
Packing Container Aluminum Drinking Bottle
BB/T (0S5-2010
Published
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.