This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage and other requirements of rubber and plastic balls. This standard applies to balls made of polyvinyl chloride and synthetic rubber as the main raw materials through a one-time molding process. QB/T 1469-1992 Rubber and Plastic Balls QB/T1469-1992 Standard download decompression password: www.bzxz.net

Light Industry Standard of the People's Republic of China
Rubber and Plastic Ball
QB/T1469—1992
This standard adopts the relevant equipment content and scope of the "Competition Rules" of the International Basketball Federation, the International Football Federation, the International Volleyball Federation, the International Handball Federation and the International Water Federation
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage and other requirements of rubber and plastic balls. This standard applies to balls made of polyvinyl chloride and synthetic rubber as the main raw materials through a one-time molding process. 2 Reference standards
GB 191
Packaging storage and transportation pictorial marking
GB/T 2828Batch inspection counting sampling procedure and sampling table (applicable to continuous batch inspection)GB/T 2829
Periodic inspection counting sampling procedure and sampling table (applicable to the inspection of production process stability)3Transport packaging receiving and shipping marking
GB/T 6388Www.bzxZ.net
GB/T 6543
3Product classification
Wabang carton
Products are divided into basketball, football, volleyball, handball, water polo, etc.; according to use, they are divided into sports balls and popular balls. Technical requirements
The circumference of the ball shall comply with the provisions of Table 1.
The circumference difference of the ball shall comply with the provisions of Table 1.
Sports balls
1992-04-14 approved by the Ministry of Light Industry of the People's Republic of China for hot solid net
749~780
720~740
680~700
680~710
620~650
540~560
Popular balls
680~700|| tt||600~650
560~580
490~510
620~650
540~560
490510
Standards Graufe Room
Sports Balls
Popular Balls
1992-12-01Implementation
4.3 The quality of the ball shall conform to the requirements of Table 2.
QB/T1469---1992
Continued Table 1
Sports balls
650~670
610~640
560~600
580~600
540~560
680~710
4.4 After the ball is inflated and left to stand for 24 hours, the circumference shall not drop by more than 10%. 4.5 The rebound height of the ball shall comply with the provisions of Table 3. 328
Popular ball
490510
Sports ball
567~650
560~580
480~500
396~453||tt| |350~380
280~310
260~280
220~250
180~220
425~475
325~400
4 00~450
Standard industry bath material negative system
Sports balls
Popular balls
. and balls
440~490
370~410
260~320
210~270
160~220
250~310
190~250
160~220
160~220
Appearance requirements shall comply with the provisions of Table 4.
Trademark pattern
Test method
5.1 Measurement of ball circumference
QB/T 1469-1992
Sports balls
The writing is clear and the pattern is correct
The spherical surface is smooth, with spots and pollution less than or equal to 2%, and no damage; Basketball: The width of the connecting strip is less than or equal to 6.35mm5.1.1 Tools: Use a metal flat soft ruler with an indication of 1mm. Rebound height
Sports ball
1200~1400
1200~1400
1100~1400
1200~1400
1100~1400
11001350
1200~1400
Popular ball
1000~1400| |tt||1000~~1400
1100～1400
Popular ball
Allow a small amount of unclear printing, but no missing words. The ball surface is clean, with defects and pollution less than or equal to 7%, and no obvious scratches.
5.1.2 Method: Measure each ball three times, each measurement is 90° from the previous measurement, and the arithmetic mean of the circumference values ​​obtained by the three measurements is taken as the circumference value of the ball.
5. 2 Measurement of circumference difference
5.2.1 Tool: Use a metal flat soft ruler with an indication of 1mm. 5.2.2 Method: Measure each ball three times, each measurement is 90° from the previous measurement, and the maximum difference of the circumference values ​​obtained by the three measurements is taken as the circumference difference of the ball.
5.3 Measurement of mass
5.3.1 Tool: Use a weighing instrument with an indication of 1g. 5.3.2 Method: Place the ball on an accurately adjusted scale for weighing. 329
Quasi-heat solid net
m standard line tape
5.4 Measurement of air tightness
QB/T1469—1992
5.4.1 Tool: Use a metal flat ruler with an indication of 1mm. 5.4.2 Method: Inflate the ball to meet the requirements of Table 1, let it stand at room temperature for 24 hours, and then measure the percentage of its circumference drop. 5.5 Measurement of rebound height.
5.5.1 Tool: Rebound height meter.
5.5.2 Method: Inflate the ball to meet the requirements of Table 1, clamp the ball mouth upward on the fixture, and the bottom of the ball is 1800mm away from the bottom plate of the rebound meter. After free fall, read its rebound height value (the value reached on the top of the ball). Each ball is tested 10 times, and the arithmetic average is taken as the rebound height value. 5.6 Appearance inspection
Mainly by visual inspection, trademarks, patterns, colors should meet the requirements of product drawings. Steel rulers can be used when necessary. The indoor light should be sufficient and the viewing distance should be 300mm.
6 Inspection rules
6.1 Product inspection is divided into factory inspection and type inspection. 6.2 Factory inspection
6.2.1 4.1, 4.2, 4.3, 4.5 of the technical requirements are sampled and inspected by production batches, and 4.6 appearance indicators are inspected piece by piece. 6.2.2 Sampling is carried out in accordance with GB/T 2828, using the normal one-time sampling plan of general inspection level I, and the inspection unit is "piece". 6.2.3 Inspection items, technical requirements, test methods, and acceptable quality level (AQL) values ​​are shown in Table 5. Table 5
Circumference and circumference difference
Rebound height
Technical requirements clause
Test method clause
6.2.4 Products must be inspected and approved by the manufacturer’s inspection department before leaving the factory, and can only leave the factory with a certificate of conformity. 6.3 Type inspection
Acceptable quality level (AQL)
6.3.1 Sampling shall be carried out in accordance with GB/T2829, using a single sampling plan of discrimination level I, and the inspection unit is "". 6.3.2 Inspection items, technical requirements, test methods, unacceptable quality level (RQL) values, and judgment arrays are shown in Table 6. Table 6
Airtightness
Technical requirements Clauses
Type inspection should be carried out in any of the following situations. Test method clauses
Trial determination and identification of new products or old products transferred to the factory for production; unacceptable quality level (RQL)
After formal production, if the structure, material, or process has been greatly changed When there is a change that may affect product performance, during normal production, an inspection shall be carried out every 6 months; when the product is stopped for a long time and production is resumed; when there is a large difference between the factory inspection result and the last type inspection; when the national quality supervision agency proposes a type inspection requirement. 7 Packaging, marking, transportation, storage
Discrimination array
Inner packaging should be packed with plastic film or soft paper and moisture-proof paper, and the outer packaging should be packed with plastic woven bags or double corrugated paper boxes that meet the requirements of Class 1 and Class 2330 in GB/T6543.
QB/T 1469--1992
7.2 Each ball must be marked with the production unit, registered trademark, product name, product grade, code, ball number and attached with a certificate of conformity, etc. The outer packaging box should comply with the relevant provisions of GB191 and GB/T6388. 7.3 During transportation, it should be protected from exposure to sunlight, rain, moisture and pollution, and isolated from organic solvents to prevent deterioration. 7.4 The storage warehouse should be ventilated and dry. The product should be stored 30cm from the ground, 20cm from the wall, and 100cm from the roof. Volatile oils and organic solvents should be isolated.
7.5 Under the above conditions, the shelf life is 18 months (from the date of manufacture). Additional remarks:
This standard was proposed by the Quality Standards Department of the Ministry of Light Industry. This standard is under the jurisdiction of the China Fur Leather Standardization Center. This standard was drafted by the Jinan Rubber and Plastic Ball Factory, and Tianjin Lisheng Sports Goods Factory participated in the drafting. The main drafters of this standard are Fu Jiaju and Liu Sushen. 331
standard search network
standard line material labor fee element
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.