JB/T 9162.15-1999 Compression screw dimensions
Basic Information
Standard ID:
JB/T 9162.15-1999
Standard Name: Compression screw dimensions
Chinese Name:
压紧螺钉 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.15-1999 JB/T 9162.15-1999 Compression screw dimensions JB/T9162.15-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
National Machinery Industry BureauwwW.bzxz.Net
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Clamping screws
Clampingscrew
Dimentinns
This standard specifies the types and sizes of clamping screws. Types and sizes
Types and sizes can be specified in the following figures and tables. 3 Marking Marking example: Marking of the clamping screw of M6, L=22mm, L=12mm: M6×22×12 JB/9162.15—1999 Approved by the State Machinery Industry Bureau on 1999-5-20 JB/T9162.15-1999 Implementation on 2000-01-01
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.