QB/T 1778-1993 Ethyl Hexanoate QB/T1778-1993 Standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
QB 1769~-1801-93
Standard for Fragrance
(Product Standard)
Published on April 29, 1993
Implemented on December 1, 1993
Published by the Ministry of Light Industry of the People's Republic of China
1 Main Content and Scope of Application
Industry Standard of the People's Republic of China
Ethyl Hexanoate
This standard specifies the technical requirements, selection and inspection rules of ethyl hexanoate. This standard is suitable for ethyl hexanoate prepared by chemical reaction of ethyl hexanoate with ethyl hexanoate. 2 Reference standards GB/T11451.3 Determination of color of spices GB/T14454. Determination of the refractive index of common spices GB/T14454. Determination of relative density of isolated and synthetic spices CB/T14474 Determination of acid value or acid content of isolated and synthetic spices GB/T1447.5 Determination of the content of commercial synthetic spices CB/T14157.1 Determination of the content of ethyl acetate in high-quality synthetic spices CB11539 Gas chromatography analysis of isolated and synthetic refills 3 Product quality control Name, molecule, structure, molecular weight Chemical name Ethyl hexanoate
Fractional formula CH.
Structural formula (cHcn).coocH,c,
Molecular weight 144.21
4 Technical requirements
(according to the original national regulations of 1987)
4.1 Color, colorless, slightly transparent, color evaluation does not pass the standard Yabi color is not marked No. 6 4.2 Aroma: 4.3 Degrees (25/2) 0.857.871
4.4 Refractive index (20)
4.5 Acid value ≤1.
4.6 Solubility of tyrochrome (total)
Solubility (25)
Test method
1.4060~1.40
Test total 70% (/)
5.1 Verification of the state
See GB/T 14454.3,
Q91778-93
5.2 Evaluation of zero gas
See GB/T24454.2
5.3 Determination of relative density, 23/25
See GB11540.
5.4 Determination of refractive index, 21
RGB/T144S4.4.
5.5 Determination of acid position
See CB/T 14457.4,
5.6 Determination of the content of ethylhexanoate
JCB/T 14457.5.
For the determination method of ethylhexanoate, see the appendix.
For the determination of the degree of degradation at 25℃, see GB/T 14437.1.
6 Inspection rules
QE 1778-93
6,1 Each batch of ethylhexanoate products shall be technically inspected by the inspection department of the manufacturer. The manufacturer shall ensure that the products meet the requirements of this standard: Each batch of products shall be accompanied by a quality certificate, which shall include: manufacturer name, product name, trademark, export date, batch number, purity, product certification and standard number. 6.2 Inspection form should be made according to this standard to check the quality of the products received. Each batch number should be inspected once, and different batch numbers should be inspected separately. B.3 For each batch of packaging units, two bottles should be collected if the number is less than 1 barrel (bottle), and three barrels (bottles) should be collected if the number is more than 14 barrels (bottles). Take the packaging from the laboratory, check the moisture and impurities, and then heat the sample tube for 5-10 μm: the sample is fully dried and the sand is uniformly discharged. The manufacturer, product name, batch number, quantity and collection period are listed on the sample, one for inspection and the other for confidential storage.
. If any indicator does not meet the requirements of this standard, the production station may stop the production and re-inspect the product. If the re-inspection result still indicates that it is not qualified, the batch of products cannot be accepted. 6.5 If the parties have any objection, they may decide to solve the problem or invite a legal inspection agency to do so, and the party shall bear the cost.
6. Color, acid value, desorption capacity are factory inspection indicators, relative density, optical density, and solubility are type inspection indicators, and inspection shall be conducted once a quarter.
Marking, packaging, transportation, and storage
7.1 The following iron barrels or packagings should be marked with: product name, manufacturer name, trademark, approval letter, and packaging letter. If the investment unit has special requirements, please discuss and negotiate with the manufacturer. 2. During transportation, the product should be protected from exposure to sunlight, rain, and heat, and should not be mixed with aldehydes. 7.3 The product should be stored in a dry, ventilated, and shaded warehouse. Prevent air pollution and transport away from fire sources. A
Customer standard industry data free download A1 Instrument
96 1778-93
Appendix A
Determination of ethyl ketone content Gas phase negative harmonic normalization method (state number part
A1.1 Chromatography instrument, source and micromachine
According to the current provisions of GB=1539 card chapter,
Fill length, diameter
Determine E0,%
WAWMCS60-R month 1:
A1.3 Detector
Fire grid separation Chemical detector,
A? Operation parameters
A2.1 Sweetness
Injection temperature 7~18℃, random
/m or 1209 constant temperature.
Injection temperature m℃. bzxZ.net
Detection temperature 150℃.
A2.2 Flow rate
Flow rate bottle gas, 25ml/miz.
A Determination of column efficiency
A Name.1 Chemical properties test
The test shall be carried out according to the method specified in Article 3, 1 of GB1153, and the general requirements shall be met.
A3.2 Column efficiency
The column efficiency shall be measured by the percentage method specified in Article 8.2 of GD11%B0. A4 Determination method
The internal normalization route shall be carried out according to Article 19, and the specified method shall be carried out. A5 Complexation and result expression
The test shall be carried out according to Article 11.4 of G11338, and the result shall be met. The standard is proposed by the Quality Standards Department of the Ministry of Light Industry. This standard is issued by the Shanghai Spice Factory under the supervision of the Shanghai Spice Factory and the Jiang Spice Factory. The main drafter of this standard is Luo Xilin. This standard is equivalent to the American Association of Standards E0A No. 172. From the date of implementation of this standard, the former Ministry of Light Industry standard Q866-83 is used as the standard for ethyl acetate.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.