title>JB/T 3411.99-1999 Dimensions of boring bars for tool holders - JB/T 3411.99-1999 - Chinese standardNet - bzxz.net
Home > JB > JB/T 3411.99-1999 Dimensions of boring bars for tool holders
JB/T 3411.99-1999 Dimensions of boring bars for tool holders

Basic Information

Standard ID: JB/T 3411.99-1999

Standard Name: Dimensions of boring bars for tool holders

Chinese Name: 刀座用镗杆 尺寸

Standard category:Machinery Industry Standard (JB)

state:in force

Date of Release1999-05-20

Date of Implementation:2000-01-01

standard classification number

Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools

Standard Classification Number:Machinery>>Metal Cutting Machine Tools>>J52 Machine Tool Accessories and Accessories

associated standards

alternative situation:JB 3510-1983

Publication information

other information

Focal point unit:Mechanical Standardization Institute

Publishing department:Mechanical Science Research Institute

Introduction to standards:

JB/T 3411.99-1999 This standard is a revision of JB 3510-83 "Dimensions of boring bars for tool holders". Only the following points have been modified during the revision, and the main technical content has not changed: - Writing format; - Standard name plus English; - Relevant reference standards and related content; - Thread drawing method. This standard specifies the type and size of boring bars for tool holders. JB/T 3411.99-1999 Dimensions of boring bars for tool holders JB/T3411.99-1999 Standard download decompression password: www.bzxz.net

Some standard content:

1CS 25.080.01
Standard of the Machinery Industry of the People's Republic of China
JB/T3411.83-3411.100-19
Accessories of boringmachines
Accessories of boringmachines1999-05-20 Issued
State Bureau of Machinery Industry
Implemented on 2000-01-01bzxZ.net
Standard of the Machinery Industry of the People's Republic of China
Dimensions of boring bars for tool holders
Kudiulburiag tool halder in gupportDimensions
This standard version of the wide knife seat can support the type and size of the parts, 2 type and size 4
Type and size according to the following figure and table Le
3 Marking
Marking:
D-63mm, 1-400mm force seat with chain agent: turning
boring bar × 40B door 1411.9—1999
State Machinery Industry Bureau 1999-05-2 approved
K inner belly
Extreme table difference 11
JB/T3411.99—1999
JB3510—83
2000-01-0 implemented
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.