This standard specifies the type, size and position of codes on window cards that meet the requirements of GB/T 17739.3-2004. This standard applies to OCR characters, bar codes, Holness codes and printed Holness codes, but not to compressed bar codes. GB/T 20232-2006 Rules for the use of microfilm bar codes on window cards GB/T20232-2006 Standard download decompression password: www.bzxz.net
This standard specifies the type, size and position of codes on window cards that meet the requirements of GB/T 17739.3-2004. This standard applies to OCR characters, bar codes, Holness codes and printed Holness codes, but not to compressed bar codes.
Some standard content:
National Standard of the People's Republic of China GB/20232—2006 Micrographic Technology Use af bar codes on aperturc cards(IS012655.2001.M0D) 2006-04-21Standardization General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China 2006-10-01Implementation (GR/T 20232—2005 This standard amendment adopts 1S12636, 2001 micro-carbon shadow technology to distinguish the English version in the use of the code) This standard and 152656: 2001 have the following technical differences: /125—990 etc. 31079-26 G11/17739.3—2004 is effective. 1SO32723.2001 is adopted. This standard has made the following editorial changes. t||"This international standard" is changed to "not standard"; except for the international standard, the name of this standard is compiled! The decimal point equal sign is used as the decimal point. Appendix A of this standard is a regulatory appendix. This standard is proposed by the Technical Committee for Standardization of Photographic Technology (C5AC/TC86) and the National Technical Committee for Standardization of Photographic Technology (C5AC/TC86) has been held. The Technical Committee for Standardization of Photographic Technology (C5AC/TC86) has been held. The Technical Committee for Standardization of Photographic Technology (C5AC/TC86) has been held. The main acceptors of this standard are: Fei Zhiwen and Sanjin. This standard is published for the first time. It is related to technical drawings and production. It uses perforated codes to mark the film with low quality. The latest printing method with automatic machine recognition can be used again. These machine-readable codes are more different from those used in paper and are more durable. This standard is formulated to standardize the size and position of each code on the card, to limit the use of these codes on automated equipment, and to specify the type, size and position of the barcode on the card in accordance with the requirements of G117739.3-2. This standard is applicable to DCR symbols, regulations, specifications and printed documents, but not to the production of shrink codes. 2. Normative references || tt || The following documents are referenced in this standard and become the terms of this standard. For any referenced document with a specified date, all subsequent revisions (excluding confidential revisions) are not applicable to this standard. However, the parties involved in the discussion of this standard shall study whether the latest versions of these documents can be used. For any referenced document without a date, the latest version shall not apply to this standard. This standard, GB/T120531989 academic limit letters set - God: (AR - A electronic research set printing image shape and size ([0976) || tt || GB/T12598-1990 optical rate all use of micro-character line second part 0CR-B character code giant sign system station e501073-21976 || tt || G/T17739.3-2004 technical table product technical documents from the third part: 36m0 auxiliary rubber rise window card ( 272-3,2051,M01)) 15016 cavity 2:1313 self-examination original 30 engraved perforation card huge transfer perforation size and arrangement IS door 6586:1980 information department alliance exchange fast seven bit and code word set on the government gift card purchase method cloud 3 technical communication and definition the following terms and definitions are used in this standard, coding area codira opening card internal identification hole and ground thickness area must be recordable screening material island (i.e. optical generation edge" block, 3.2 machine light code nuchine readable code The printout is automatically selected by the device at the top. 3.3 The main information on the card can be machine information. 3.4 The information is a line or a group of machine information. 4.1 The code on the card is a combination of 4.2.4.3 and 4.4. If more than one code is used, these codes may be combined due to the interaction of the code and the code is not compatible. GB/T 20232-20SG A2OCR character support 4. 2. 1. The code line should be parallel to the edge of the card (H713053-1989, and each line should be 68 mm above the boundary. The standard character height is 2.54 mm. The standard character height should be 24 mm. The OCR character position on the lower film should be consistent with the position of the card surface, and the code line should be 4.34 mm ± 0.25 mm from the top of the card to the top of the card. The distance between the right side of the card and the upper letter should not exceed 8. The distance between the two characters should be at least 6.35 m. 4.3.1 General Bar code characters shall use one of the following codes: 39 Industrial 25 code, Cross 25 code: Bar code characters shall be placed on the side of the window card, and the code line shall be parallel to the long side of the windowless card. The character of the message shall be at the maximum rate of ten, the minimum unit element is D, 19mm, and the maximum is 0.29mm. 4.3.2 The main position of the main message is shown in Figure 1 and Figure 2. Single 1.-39 30, Figure 1 Information position 1. Field 2 main change position 1 h CA/T 20232—2005 Unit is variable* Price setting 1 The minimum height of the main information shown is 20. The time limit from the card end to the core information is preferably 0.80mm ± 0.25 m (see 1. This clock main tracking is also suitable for automatic reading and down-to-earth work. The preferred consumption point is 16. The minimum height of the main information is 2.54tu:m. The distance from the end of the information to the bottom of the screen is 4,m ± 0,25 (see 2). This compensation is only applicable to automatic machines. 4.4 Not Ness day SO65 and TSO16 now define the requirements for the placement of Ness codes and related printing. The requirements for Ness codes for printing are Appendix A, GB/T 2G232-2DC6 (regular width) Printing the code The rectangular block of the code to be printed should be printed on the window card surface specified in 1S06586. The maximum number of characters available is 57. The specified column position is the 1st to 53rd to 77th column. The number of rows is 12. The same as for the perforated lower sheet--the manual delay reading code should be placed in the part before the opening card, which should also be placed in the B column position specified in 1S16 or in the 5th column printing optional position. In some cases, a manual recognition code can be left on the opening card to help the machine read the code. This code will not appear in the machine readable code area. Microfilm technology A6 size window card G3/T30233-20 06 1501687, 1973 Information processing non-calculation hole card specification EN799 Li Chuangkang Zi Jiangjing Xuexiang single "128 book" "Jiao San" CB/T20232—2006 Ren Gong H Nanzhi shadow board technique Xiang is indeed on the blind card to promote the use of rules G3/T 20232—500 China Medical Supervision and Approval North Fuxingmen Well Erlihe Ximing No.wwW.bzxz.Net Postal code: 100045 Tel: 6658304668517643 China Anti-Use, Group Company is in production Format 12301/16 Printing Sheet 0. Format 10 Noon 200% Year 0# One 200% Month No. 15th, 134068·1-8242 Price 10.00 yuan In addition, there are printing errors. The company Dragon Line Center has the exclusive right to consider the additional charges Report telephone: (010) 68533533 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.