HG/T 3676-2000 Basic fluorescent red 8B (basic rose essence) HG/T3676-2000 standard download decompression password: www.bzxz.net

ICS 71.100.01;87.060.10
Chemical Industry Standard of the People's Republic of China
HG/T3676—2000
Basic Fluorescent Red 8B (Basic Rose Red)
Basic Fluorescent Red 8B (Basic Rose Red) 2000-06-05 Issued
2001-03-01 Implementation
State Administration of Petroleum and Chemical Industry Issued
W Record No.: 7496—2000
HG/T3676—2000
This standard selects the test conditions and determines the test method of dyeing color intensity in accordance with the national standard GB/T4465—1984 "Determination of color and intensity of basic dyes". According to the needs of users and the actual production situation, the test items and technical indicators are determined. This standard is proposed by the Policy and Regulations Department of the State Administration of Petroleum and Chemical Industry, and is under the jurisdiction of the National Technical Committee on Standardization of Dyes. The drafting units of this standard are: Shenyang Chemical Research Institute and Tianjin Zhenxing Chemical Plant. The main drafters of this standard are: Wang Yong and Cui Shunli. This standard is published for the first time.
This standard is interpreted by the Secretariat of the National Technical Committee on Standardization of Dyes 1
W.bzsoso.cOm1 Scope
Chemical Industry Standard of the People's Republic of China
Basic Fluorescent Red 8B (Basic Rose Red)
Basic Fluorescent Red 8B (Basic Rose Red) HG/T3676—2000
This standard specifies the requirements, sampling, test methods, inspection rules and marking, labeling, packaging, transportation and storage of basic fluorescent red 8B (CI basic violet 10).
This standard applies to basic fluorescent red 8B which is prepared by condensation of m-hydroxydiethylaniline and phthalic anhydride, followed by alkali fusion and crystallization. It is mainly used for dyeing acrylic fibers and silk.
Structural formula:
(C,H,,N
Molecular formula: C2aHs1OsNCl
N(C,H)
Relative molecular mass: 479.02 (according to the 1997 international relative atomic mass) 2 Cited standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T2374-1994 General conditions for dyeing determination of dyes GB/T2381-1994 Determination of insoluble matter content in dyes GB/T2399-1980 Color and intensity of cationic dyes Determination method GB/T3671.1—1996 Determination of solubility and solution stability of water-soluble dyes (idtISO105-Z07:1995) GB/T3920—1997 Textiles-Test for color fastness-Color fastness to rubbing (eqvISO105-X12:1993) GB/T3921.3—1997 Textiles-Test for color fastness-Color fastness to washing (eqvISO105-C03:1989) GB/T3922—1995 Textiles-Test for color fastness-Color fastness to perspiration (eqvISO105-E04:1994) GB/T4465—1984
Determination of color light and intensity of basic dyes GB/T4841.1—19841/1 Standard depth color chart for dyeing GB/T 6152—1997
GB/T8427—1998
3 Requirements
Color fastness test Color fastness to hot pressing (eqvISo105-x11:1994) Textiles
Textiles
3.1 Appearance: Green flash crystal.
Color fastness test Color fastness to light Xenon arc (eqvISO105-B02:1994) 3.2 The quality of basic fluorescent red 8B shall comply with the provisions of Table 1. Approved by the State Administration of Petroleum and Chemical Industry on June 5, 2000 and implemented on March 1, 2001
W.bzsoso:com Item
1. Color (with standard)
2. Intensity (of standard), points
3. Content of impurities insoluble in water, %
4. Solubility (60℃), 8/L
HG/T3676—2000
Quality requirements for basic fluorescent red 8B
Approximately~slightly
The color fastness of basic fluorescent red 8B on acrylic fabric should not be lower than that specified in Table 2. Table 2 Color fastness of basic fluorescent red 8B on acrylic fabric Light fastness
(Xenon arc)
1) 1/1 Dyeing depth is equivalent to 0.6% (owf). 4 Sampling
Sweat resistance
Friction resistance
Hot pressing resistance
200℃
Discoloration 4h
Sampling is done in batches. The manufacturer takes the products that are mixed evenly at one time as a batch. The number of sampling barrels in each batch shall not be less than 10%, and the sampling of small batch products shall not be less than 3 barrels. The packaging of the products must be intact. When sampling, do not allow foreign impurities to fall into the products. Use a probe to sample from the upper, middle and lower parts of the barrel. The total amount of samples taken shall not be less than 200g. After the samples are fully mixed, they are divided into two clean and dry brown ground-mouth bottles, sealed with paraffin, and labels are attached to the bottles. Indicate: manufacturer name, product name, batch number, sampling date and location. One bottle is for inspection, and the bottle is kept for reference.
5 Test method
5.1 Determination of appearance
Visual evaluation is adopted.
5.2 Determination of dyeing shade and intensity
Colorimetry.
General conditions shall be in accordance with the relevant provisions of GB/T
2374. The dyeing method adopts the acrylic bulked dyeing in GB/T4465-1984. The dyeing depth is 0.3%. 2g acrylic bulked yarn is used for dyeing. The bath ratio is 1:100. 5.2.2
5.2.3 Preparation of dye bath: Prepare the dye bath in five 300mL dye vats according to the provisions of Table 3. Table 3 Preparation of dye bath
Dyeing tank number
0.1g/500mL standard solution
0.1g/500mL sample solution
10g/L acetic acid solution
10g/L sodium acetate solution
100g/L anhydrous sodium sulfate solution
Make up to total volume with distilled water
5.2.4 Dyeing operation
Dye at 70℃, heat to 100℃ in 30min, keep warm and dye for 60min. Other operations shall be carried out in accordance with the relevant provisions of GB/T2399. 5.2.5 The evaluation of color light and intensity shall be carried out in accordance with the relevant provisions of GB/T2374. 2
W.bzsoso,cOn5.3 Determination of water-insoluble impurities
Carry out in accordance with the provisions of GB/T2381.
5.4 Determination of solubility
HG/T3676—2000
Perform according to the provisions of GB/T3671.1. The dye is pulped with an equal mass of glacial acetic acid and then adjusted to the specified volume with water. 5.5 Determination of color fastness
All color fastness test samples are dyed to 1/1 depth according to the provisions of GB/T4841.1. Color fastness to rubbing is carried out according to the provisions of GB/T3920. Color fastness to washing is carried out according to the provisions of GB/T3921.3. Color fastness to perspiration is carried out according to the provisions of GB/T3922. Color fastness to hot pressing is carried out according to the provisions of GB/T6152, dry pressing at 200℃. Color fastness to light is carried out according to the provisions of GB/T8427. 6 Inspection rules
6.1 Inspection classification
All items specified in 3.1, 3.2 and 3.3 of this standard are type inspection items, among which 1~3 items in 3.1 and 3.2 are factory inspection items. Item 4 in 3.2 and 3.3 shall be inspected once a year during continuous normal production. 6.2 Factory inspection
Alkaline fluorescent red 8B shall be inspected by the quality inspection department of the manufacturer. The manufacturer shall ensure that all basic fluorescent red 8B shipped out of the factory meet the requirements of this standard.
6.3 User acceptance
The user unit has the right to inspect the received basic fluorescent red 8B in accordance with the provisions of this standard to check whether it meets the requirements of this standard.
6.4 Re-inspection
If one of the indicators in the inspection results does not meet the requirements of this standard, samples shall be taken from twice the amount of packaging for re-inspection. Even if only one indicator in the re-inspection results does not meet the requirements of this standard, the entire batch of products cannot be accepted. 7. Marking, labeling, packaging, transportation and storage 7.1. Marking and labeling
The packaging barrels of Alkaline Fluorescent Red 8B should be painted with firm and clear markings, indicating: the name of the manufacturer, the address of the factory, the product name, the registered trademark, the standard number, the batch number, the production date, the gross weight and the net weight. Each package of the product should be accompanied by a label of a certain format, including: the name of the manufacturer, the product name, the trademark, the certificate that the product quality meets the standard requirements and the standard number. 7.2. Packaging
Alkaline Fluorescent Red 8B is packed in an iron barrel lined with a plastic bag and sealed and sealed. The net weight of each barrel is 25kg. Other packaging can be determined by negotiation with the user.
7.3. Transportation
During transportation, it should be prevented from being inverted, handled with care, and collisions should be avoided. Do not damage the packaging. 7.4. Storage
Alkaline Fluorescent Red 8B should be stored in a cool, dry and ventilated place to prevent moisture and heat. 3bZxz.net
W.bzsoso.cOI
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.