GB/T 3453-1994 Basic control regulations for data communication
Basic Information
Standard ID:
GB/T 3453-1994
Standard Name: Basic control regulations for data communication
Chinese Name:
数据通信基本型控制规程
Standard category:National Standard (GB)
state:in force
Date of Release1982-01-02
Date of Implementation:1995-03-01
standard classification number
Standard ICS number:Information technology, office machinery and equipment >> 35.100 Open Systems Interconnection (OSI)
Standard Classification Number:Electronic Components and Information Technology>>Information Processing Technology>>L78 Data Information
associated standards
alternative situation:GB 3453-1982
Procurement status:NEQ ISO 745-1975
Publication information
publishing house:China Standards Press
Publication date:1995-03-01
other information
Release date:1982-12-31
Review date:2004-10-14
drafter:Zhang Baodong, Wang Maohong, Zhang Wenhui, Ye Shaozhi
Drafting unit:North China Institute of Computing Technology, Ministry of Machinery
Focal point unit:National Information Technology Standardization Technical Committee
Proposing unit:Ministry of Machinery and Electronics Industry of the People's Republic of China
Publishing department:State Bureau of Technical Supervision
competent authority:National Standardization Administration
Introduction to standards:
The basic control procedure is mainly applicable to the communication between data terminal equipment (DCE)/data circuit terminating equipment (DCE) or DTE/DTE in the network. This standard only stipulates the transmission on one data link and does not involve the operation of "serial" data links. GB/T 3453-1994 Data Communication Basic Control Procedure GB/T3453-1994 Standard Download Decompression Password: www.bzxz.net
Some standard content:
0 Introduction
National Standard of the People's Republic of China
Basic mode control procedures for data communicationswwW.bzxz.Net
GB/T3453-94
Replaces GB345382
Data communication system can be regarded as a collection of some data terminal devices and interconnected networks that can exchange information. -A data link is composed of many devices connected to the same network, working at the same rate and the same coding. Any "store and forward" and intermediate data processing will separate the data link. A system contains one or more data links. The data link control procedure is used to monitor the transmission of information in the data link. According to the mode of operation, it can be divided into many types. This standard is one of them, called "basic mode", and its control function is realized by transmitting control characters. 1 Subject content and scope of application
The basic control procedure is mainly applicable to network data terminal equipment (DTE)/data circuit terminating equipment
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.