Universal technical riquirements of anti-counterfeiting nuclear products
Some standard content:
1cs 27. 120. 99
National Standard of the People's Republic of China
GB/T18758-2002
Universal technical requirements of anti-counterfeiting nuclear technology products
Universal technical requirements of anti-counterfeiting nuclear technology products2002 - 06 - 13 Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
2003-01-01 Implementation
GB/T18758—2002
Visible in referenced documents
Product category
Anti-counterfeiting strength
Technical requirements
Testing methods
Testing rules
Safety management measures
1G Labeling, packaging, transportation, storage
E KAN KAca
This standard is selected by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. This standard is the National Anti-counterfeiting Association Standardization Technical Committee! 1.2002
GB/T T8758
Original units of this standard: Beijing Institute of New Technology, General Customs of the People's Republic of China, People's Bank of China, Beijing Tsinghua Jinbu New Technology Co., Ltd., First Institute of Public Security, Department of Chemistry of Huazhong University of Science and Technology. Main drafters of this standard: Xue Wu, Liu Zhijie, Fei Zixiang, Qiu Xuexin, Chen Rennian, Gong Laoma 1 Scope
General technical specifications for anti-counterfeiting nuclear technology products
GH/T 18758—2D02
This standard defines the classification, prevention strength, technical requirements, test methods, inspection rules, safety measures, marking, packaging, transportation and other aspects of anti-counterfeiting nuclear technology products.
This standard is used for the products with technical characteristics. 2 Normative references
The following references shall be used in accordance with the provisions of this standard: Any referenced document not dated after the date of reference shall be subject to the latest revision or amendment report (excluding the contents of the revision report) of the standard. However, the parties who have reached an agreement on this standard shall report the latest version of this document: Any referenced document not dated after the date of reference shall be subject to the latest revision of the standard. 0 Shipping drawing mark 6319-290019
GB/T2R1987 Vertical batch inspection plan and sampling procedure Sampling table for continuous batch inspection 1/2829-158? Periodic format spring counting sample program and sample table (for production process stability inspection) GB47U2 Radiation health protection basic standard (GR47521984) G1-Aluminum hot stamping
GB/T170001SS? Anti-counterfeiting information product bottle daily technical conditions GB/T 17((21557
Anti-counterfeiting printing product production management specification
G117004—99? Dangerous injury technical specification
3 Definitions
This standard uses the following definitions.
According to the traces of nucleartrackfnsolids
The charged particles in the solid body are produced according to the traces of 3.2
Nuclear pore membranesmuclear pxrs fllm
The charged particles are collected and the holes are marked.3. 3
Nuclear Spectroscopy
Studies the energy level transition and change of nuclei after radiation, including the number, mass, energy, angular distribution, etc. of the particles; and expresses the motion of nuclei in the form of nuclear energy spectrum, including nuclear resonance spectroscopy, synchronous radiography, X-ray photometry and spectroscopy, etc. 3. 4
Nuclear Trigger CodeUsing laser holographic film, plastic or paper as the medium, the information is revealed after physical and chemical synthesis, 3.5
Nuclear Double Card Anti-Counterfeiting TechnologyKANKAca
GA/T8758—2002
Applies the original nuclear spectroscopy as a signal to distinguish the random information it carries. Without anti-counterfeiting identification and inspection, the technology of double-checking can be used to distinguish the authenticity.
4 Product classification
The classification of nuclear technology products is as follows:
4.1 Nuclear pore fast products,
4.2 Nuclear pore membrane anti-counterfeiting products:
Nuclear pore replacement anti-counterfeiting products include
) Nuclear pore explicit pattern anti-counterfeiting products.
Nuclear pore membrane explicit pattern products include:
1! Color through printing type;
2) Disease water disinfection large-scale
Nuclear pore noise verification pattern to anti-counterfeiting products.
() Pore membrane to identify anti-counterfeiting products
4.3 Nuclear pore password is issued, that is, counterfeit products.
Read the clock to send passwords to counterfeit products include:
) Physical trigger new business anti-injury products:
b) Chemical trigger password anti-counterfeiting products:
() Biological trigger password anti-counterfeiting products:
4.4 Nuclear speed anti-counterfeiting products.
Nuclear price connected counterfeit products include
) Nuclear speed anti-counterfeiting products with laser holographic film as carrier;
Nuclear speed anti-counterfeiting products with whole film as carrier;
Nuclear speed anti-counterfeiting products with paper as carrier;
5 Nuclear speed anti-counterfeiting products with paper as carrier;
6 Nuclear speed anti-counterfeiting products with paper as carrier;
7 Nuclear speed anti-counterfeiting products with paper as carrier;
8 Nuclear speed anti-counterfeiting products with paper as carrier;
9 Nuclear speed anti-counterfeiting products with paper as carrier;
10 Nuclear speed anti-counterfeiting products with paper as carrier;
11 Nuclear speed anti-counterfeiting products with paper as carrier;
12 Nuclear speed anti-counterfeiting products with paper as carrier;
13 Nuclear speed anti-counterfeiting products with paper as carrier;
14 Nuclear speed anti-counterfeiting products with paper as carrier;
15 Nuclear speed anti-counterfeiting products with paper as carrier;
16 Nuclear speed anti-counterfeiting products with paper as carrier;
17 Nuclear speed anti-counterfeiting products with paper as carrier;
18 Nuclear speed anti-counterfeiting products with paper as carrier;
19 Nuclear speed anti-counterfeiting products with paper as carrier;
20 Nuclear speed
. Level: projects that do not need to be publicized,
Level D: projects that cannot be publicized.
5.2 According to the degree of product certification of the technical points, the projects are officially developed and domestically and internationally exclusive.
Level B: independently developed and domestically exclusive.
Level: projects that can be introduced but not expanded:
Level D: projects that have been introduced but have serious protection.
5.3 According to the degree of setting of the level measurement: | |tt||Grade: internal identification, professional equipment identification, complete chemical identification. Level: physical identification and intelligent identification.
Grade: professional equipment identification
Grade, this is physical limited identification
5.4 Evaluation and grading according to the safety period of the enterprise:
Grade A: no less than five years,
1 Short: no less than two years,
Grade C, no less than one year:
D Natural: no less than
6 Technical requirements
6.1 Safety performance
6.1.1 Health and safety performance
All nuclear anti-counterfeiting products shall comply with the radiation health and safety requirements of H4792. 6.1.2 Anti-counterfeiting safety performance
All simulation anti-counterfeiting products shall meet the requirements of non-transfer and non-use: 6.2 Appearance quality
The appearance quality of anti-counterfeiting technology products shall comply with 6B/ The standard of 7.2 in T1(1UU7 is. 6.3 Comprehensive performance index of nuclear anti-counterfeiting products
Comprehensive performance index of nuclear anti-counterfeiting products is Table 1. Table 1
Mountain public
Detection device
Underwriter's signal noise North
Nuclear anti-counterfeiting products contain performance index
T Salary
G: T8/58-20D2
Ester index
565. 00> t. 2: 150. 50
139 50 77. 410
Core product comprehensive performance index month broad evaluation of the product anti-express mail, small public or () mountain: comprehensive performance index points AE center D a total of 1 level 6.3.1 alley can be disclosed
A level can not be disclosed is zero, T=state
level: can not be disclosed for one item, =
【'level: can not be disclosed for two must, 【=2】level 1: ten can be disclosed for three items, small = 10632 detection position device signal to noise ratio I:
A level: the signal is higher than the signal,! =!
B level: the signal is 5 times, 『=5
heart vertical, the signal is 0 times higher than 7 times,! =7
D level: the signal is guaranteed to be 0 times, 1
6.3.31 Thank you 1
A: embedded recognition, professional recognition and energy recognition, 130B: H channel recognition, energy recognition, I one heart C level, internal eye recognition and industry recognition, several 4n1 payment: only meat take recognition, T=2℃
6.3.4 Recognition degree
A number: point product correct recognition rate 1 bad: slow product error recognition rate, =1.KANKAca
GB/I187582002
The product correct recognition rate +95%, low product error recognition rate 1%, V=0.95C level; product correct recognition rate 2% energy product error recognition rate, V.Level 1: 80% recognition rate of genuine products, 0.806.3.5 comprehensive system 1!
Level 4: Independent development, domestic and foreign independent safety period is more than 5 years, 5B: Independent and domestic independent full period is more than "years", "3 systems, only imported, but no spread, safety period is more than 1 year, including level 2; imported items, no strict expansion, safety distribution is more than half a year, V17 trial method
7.1 Test requirements
7.1.1 Test environment
Ambient temperature
Degree of humidity: 50+
7.1.2 Appearance inspection
7.1.2.1 When using the micro-light hologram as the carrier, it shall comply with GB/T17000 standard. 1.2.2 When using paper or plastic as the carrier, blow it clean with high-pressure air. 7.2 It cannot be transferred and reused. Inspection
7.2.: When using the laser hologram as the carrier, it shall comply with GB/T17000 standard. 7.2.2 When using paper or other materials as the carrier, it is exempted from inspection. 7.3 Comprehensive performance index measurement
7.3.1 Technical disclosure degree
7.3.1.1 The technical disclosure scope is as follows: 1) Equipment
2) Materials;
3) Technology (or method)
4) Production of 2-10 small products (one for each sample) using the same material on the same equipment: a) Use the same material to inspect the product. 7.3.2 Detection of receiver input signal ratio
7.3.2.1 Detection of receiver input signal ratio The inspection instruments are as follows: 1) Optical microscope:
2) Nuclear analysis
Other related information.
7.3.2. ? The test method for measuring the noise ratio of the device is as follows: Detection of background noise ratio!
Sampling test information
Information ratio = (SI/EI./N
Wherein, is the information;, is the background and N is the detection efficiency. 7.3.3 Identifiable products
7.3.3.1 Identification requirements are as follows:
a) Appearance recognition:
b) Professional training:
Intelligent recognition.
7.3.3.7 Identifiability test method:
Observe the product appearance information and compare it with the sample: a
1) Use professional instruments to compare the sample with the control sample: c) Use intelligent instruments to compare the sample with the control product. 8 Inspection rules
8.1 Product factory inspection
Products must pass the inspection of this standard by the quality inspection department of the manufacturer before leaving the factory. 8.2 Routine inspection and type inspection of products
Product inspection is mainly divided into routine inspection and type inspection, see Table 2. Table 2 Product Inspection
Inspection Classification
Inspection Risk
Intensive Inspection
8- 2.1 Routine Inspection
8.2.1.1 Batch
The same variety and same specification of product delivery batch is a batch, 8.2.1.2 Sampling Plan
Features
GB/T18758—2002
External width, specialized characteristics, performance and compatibility with GB/T2828 are determined by the routine sampling plan, and the inspection level is TAQI.6.3.8.2.1. 3 Sample extraction
Specimen shall be randomly selected from the batch, and the sample shall represent the quality of the goods. The sampling time can be during the batch formation process or after the batch processing
8.2.1.4 Sample inspection
The sample is divided into the following categories:
8) Appearance inspection;
b) Professional instrument inspection:
Instrument inspection.
8.2.1.5 Determination of required inspection
The determination of routine inspection shall be carried out in accordance with the following provisions:) Appearance inspection shall be carried out in accordance with 8.3 of GB/17000 and meet the requirements of 7.2 of GB/17000.L) Professional instrument inspection shall be based on the instrument judgment. ): Intelligent inspection shall be based on the judgment of the instrument: 2.2 Type inspection
When new products are put into production, the process is changed, the mold is changed, and the main raw materials are changed, type inspection must be carried out. 8-7.2.1 Batch
The delivery batch of products of the same variety and specification is a batch. 8.2.2.2 Sampling method
See G1/T2829 for the selection of sampling plan. 8.2.2.3 Sample extraction
Select sub-samples from the batch according to the first, middle and last section of the batch. 8.2.2.4 Sample inspection
KAN KAa
GR/T1675B—2C02
The sample inspection shall be carried out according to the following methods; the general performance inspection of this document also includes: 1) external inspection, 2) professional instrument inspection: 3) intelligent instrument inspection.
1) Comprehensive inspection of samples
2) Recognition degree inspection:
4) Recognition degree inspection:
5) Comprehensive coefficient inspection:
8.2.2.5 Type inspection judgment
Type inspection judgment is divided into judgment on overall performance and judgment on comprehensive performance: n) General judgment:
1) Appearance is based on professional instrument inspection.
2) Instrument inspection is based on equipment inspection. Comprehensive performance judgment:
) Judging by product manual
2 Determined by general instruments.
9 Safety management measures
9.1 The whole process shall comply with the provisions of GB/T170021097. 9.2 The production and handling shall comply with the relevant provisions of GB/T17001SS? Article 10 10 Marking, packaging, transportation, storage
10.1 Marking
The product name, number, manufacturer's name and address shall be marked on the packaging box, and the production period shall be 10-2 Packaging
The inner packaging shall be paper or plastic bag, and the outer color shall be standard color packaging, with a certificate of quality attached. 10.3 When transporting the product, it shall be protected from alcohol, and the protection rate is:
10.4 StorageWww.bzxZ.net
The food shall be stored in a well-ventilated and safe environment.1. Product factory inspection
Products must pass the inspection of this standard by the quality inspection department of the manufacturer before leaving the factory. 8.2 Routine inspection and type inspection of products
Product inspection is mainly divided into routine inspection and type inspection, see Table 2. Table 2 Product Inspection
Inspection Classification
Inspection Risk
Intensive Inspection
8- 2.1 Routine Inspection
8.2.1.1 Batch
The same variety and same specification of product delivery batch is a batch, 8.2.1.2 Sampling Plan
Features
GB/T18758—2002
External width, specialized characteristics, performance and compatibility with GB/T2828 are determined by the routine sampling plan, and the inspection level is TAQI.6.3.8.2.1. 3 Sample extraction
Specimen shall be randomly selected from the batch, and the sample shall represent the quality of the goods. The sampling time can be during the batch formation process or after the batch processing
8.2.1.4 Sample inspection
The sample is divided into the following categories:
8) Appearance inspection;
b) Professional instrument inspection:
Instrument inspection.
8.2.1.5 Determination of required inspection
The determination of routine inspection shall be carried out in accordance with the following provisions:) Appearance inspection shall be carried out in accordance with 8.3 of GB/17000 and meet the requirements of 7.2 of GB/17000.L) Professional instrument inspection shall be based on the instrument judgment. ): Intelligent inspection shall be based on the judgment of the instrument: 2.2 Type inspection
When new products are put into production, the process is changed, the mold is changed, and the main raw materials are changed, type inspection must be carried out. 8-7.2.1 Batch
The delivery batch of products of the same variety and specification is a batch. 8.2.2.2 Sampling method
See G1/T2829 for the selection of sampling plan. 8.2.2.3 Sample extraction
Select sub-samples from the batch according to the first, middle and last section of the batch. 8.2.2.4 Sample inspection
KAN KAa
GR/T1675B—2C02
The sample inspection shall be carried out according to the following methods; the general performance inspection of this document also includes: 1) external inspection, 2) professional instrument inspection: 3) intelligent instrument inspection.
1) Comprehensive inspection of samples
2) Recognition degree inspection:
4) Recognition degree inspection:
5) Comprehensive coefficient inspection:
8.2.2.5 Type inspection judgment
Type inspection judgment is divided into judgment on overall performance and judgment on comprehensive performance: n) General judgment:
1) Appearance is based on professional instrument inspection.
2) Instrument inspection is based on equipment inspection. Comprehensive performance judgment:
) Judging by product manual
2 Determined by general instruments.
9 Safety management measures
9.1 The whole process shall comply with the provisions of GB/T170021097. 9.2 The production and handling shall comply with the relevant provisions of GB/T17001SS? Article 10 10 Marking, packaging, transportation, storage
10.1 Marking
The product name, number, manufacturer's name and address shall be marked on the packaging box, and the production period shall be 10-2 Packaging
The inner packaging shall be paper or plastic bag, and the outer color shall be standard color packaging, with a certificate of quality attached. 10.3 When transporting the product, it shall be protected from alcohol, and the protection rate is:
10.4 Storage
The food shall be stored in a well-ventilated and safe environment.1. Product factory inspection
Products must pass the inspection of this standard by the quality inspection department of the manufacturer before leaving the factory. 8.2 Routine inspection and type inspection of products
Product inspection is mainly divided into routine inspection and type inspection, see Table 2. Table 2 Product Inspection
Inspection Classification
Inspection Risk
Intensive Inspection
8- 2.1 Routine Inspection
8.2.1.1 Batch
The same variety and same specification of product delivery batch is a batch, 8.2.1.2 Sampling Plan
Features
GB/T18758—2002
External width, specialized characteristics, performance and compatibility with GB/T2828 are determined by the routine sampling plan, and the inspection level is TAQI.6.3.8.2.1. 3 Sample extraction
Specimen shall be randomly selected from the batch, and the sample shall represent the quality of the goods. The sampling time can be during the batch formation process or after the batch processing
8.2.1.4 Sample inspection
The sample is divided into the following categories:
8) Appearance inspection;
b) Professional instrument inspection:
Instrument inspection.
8.2.1.5 Determination of required inspection
The determination of routine inspection shall be carried out in accordance with the following provisions:) Appearance inspection shall be carried out in accordance with 8.3 of GB/17000 and meet the requirements of 7.2 of GB/17000.L) Professional instrument inspection shall be based on the instrument judgment. ): Intelligent inspection shall be based on the judgment of the instrument: 2.2 Type inspection
When new products are put into production, the process is changed, the mold is changed, and the main raw materials are changed, type inspection must be carried out. 8-7.2.1 Batch
The delivery batch of products of the same variety and specification is a batch. 8.2.2.2 Sampling method
See G1/T2829 for the selection of sampling plan. 8.2.2.3 Sample extraction
Select sub-samples from the batch according to the first, middle and last section of the batch. 8.2.2.4 Sample inspection
KAN KAa
GR/T1675B—2C02
The sample inspection shall be carried out according to the following methods; the general performance inspection of this document also includes: 1) external inspection, 2) professional instrument inspection: 3) intelligent instrument inspection.
1) Comprehensive inspection of samples
2) Recognition degree inspection:
4) Recognition degree inspection:
5) Comprehensive coefficient inspection:
8.2.2.5 Type inspection judgment
Type inspection judgment is divided into judgment on overall performance and judgment on comprehensive performance: n) General judgment:
1) Appearance is based on professional instrument inspection.
2) Instrument inspection is based on equipment inspection. Comprehensive performance judgment:
) Judging by product manual
2 Determined by general instruments.
9 Safety management measures
9.1 The whole process shall comply with the provisions of GB/T170021097. 9.2 The production and handling shall comply with the relevant provisions of GB/T17001SS? Article 10 10 Marking, packaging, transportation, storage
10.1 Marking
The product name, number, manufacturer's name and address shall be marked on the packaging box, and the production period shall be 10-2 Packaging
The inner packaging shall be paper or plastic bag, and the outer color shall be standard color packaging, with a certificate of quality attached. 10.3 When transporting the product, it shall be protected from alcohol, and the protection rate is:
10.4 Storage
The food shall be stored in a well-ventilated and safe environment.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.