This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of wood files. This standard applies to wood files. When there are special requirements for the product, it is not subject to the restrictions of this standard. QB/T 2569.6-2002 Steel Files Wood Files QB/T2569.6-2002 Standard download decompression password: www.bzxz.net
Some standard content:
[CS 25.140.30 Classification number: J47 Record number, 11399-2003 Light Industry Standard of the People's Republic of China QB/T 2569. 6 —2002 Replaces QB/T3850—1999 Files--Rasps Published on 2002-12-27 Implementation of the State Economic and Trade Commission of the People's Republic of China on 2003-04-01 QB/T 2569.6—2C02 This standard is a revision of the original national standard GB/T5815—1986 "Wooden Chain" (the standard was issued by the China National Light Industry Association [1999] No. 112 document and converted to standard number QB/T3850-1999, which is not included in the revision). The following content has been revised and revised. The following content has been revised and revised. Part of the content has been revised as necessary. Www.bzxZ.net This standard was proposed by the China Light Industry Federation and issued by the National Tool Hardware Standardization Center. It was promoted by the Shanghai Tool Industry Research Institute, and Hailian Jinfeng Factory and Haigang No. 2 Factory jointly participated in the study. The main drafters are: Lu Kongling, Zhu Miaoxie, Xia Zhixiang, and Lin Guande. From the date of implementation of the standard, it will replace the national light industry standard QB/T3850-1999 issued by the National Light Industry Bureau. QB/T2569.6—2002 1 Scope Steel Files and Wood Files This standard specifies the product classification, requirements, test methods, inspection criteria, marking, packaging, transportation and storage of non-woven fabrics. This standard is applicable to woven fabrics. When the product has special requirements, it may not be subject to the provisions of this standard. 2 Normative References The following documents become the terms of this standard through the reference of this standard: For all reference documents with a date, all subsequent modifications (excluding incorrect documents) or revisions are not applicable to this standard. However, the parties who have reached an agreement based on this standard shall study whether the latest version of this document can be used. For all reference documents without a date, the latest version shall apply to this standard. GB/T5806-2003 General Technical Specifications for Steel Chains 3 Product Classification 3.1 The reference format of non-woven fabrics is shown in Figures 1 to 4. 3.2 The dimensions of the plug that is not sold are specified in Tables 1 to 4. * The basic dimensions of the wood file are as follows: M--2UU M-(-750 M-H1 30K0 Basic dimensions Yearly ruler Y-02-159 362209 4-02-250 M-02-300 M-03-15C M-113-250 M-13-300 Figure 2 Half-stocked seat |Table 2 Basic dimensions of semi-circular wooden fences Basic size 20 Basic size of round wooden files Basic size of domestic wire Q8/T2566.6-2002 25--50%L QR/T2569.6—2002 Oversize M-01-150 M-D4 200 X4-04 250 M04200 4 Requirements Figure 4 Furniture half-surface wood file Table 4 Basic dimensions of furniture half-surface water file Basic dimensions Technical requirements for furniture shall be in accordance with the provisions of GB/5806-2003 Section 4, 5 Test methods The test method for large chains shall be in accordance with the provisions of GB/T5806-2003 Chapter 5, 6 Inspection rules The inspection rules for properties shall be in accordance with the provisions of GB/T5806-2003 Section 6. Marking, packaging, transportation, storage Marking, packaging, transportation, storage shall be in accordance with the provisions of GB/T5806-2003 Chapter 7. 3 25~50)56 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.