Some standard content:
This standard replaces FZT33((2
1992,
machine standard and F7/T3002-1992 file main changes are as follows! The standard has been modified to expand the suitable specifications of the wide steel push; the length, width, breaking strength and other indicators of each product are adjusted; the allowable score number of each product surface flow point is adjusted; the customer's product is stricter. 3 points/1m1FZ/33002-2003
has made adjustments to the points of weft, drum, warp, warp, warp, box, box, needle path: added the name of the human section and the heart flow point; added the explanation of the recovery of the recovery point The scoring provisions for the points of pure warp shrinkage and wave pattern, 1rr1 or less, single-shot warp break, parallel warp main yarn and parallel break, different fibers, etc. have been cancelled. The provisions for the point reduction of cloth surface energy have been added. Except for A, B, and front center reduction, this standard is a machine standard. This standard was proposed by the former State Administration of Industry and Commerce. This standard is the starting unit of Chaonan Technology Research and Development Center, Chaonan Province Product Quality Supervision and Testing Center, Chaonan Province Dongting Core Weaving and Printing Factory. The main drafters of this standard are Deng Zhi, Deng Zhi, and Xu Ke, who are in charge of the revision and revision of this standard. The revision of this standard is as follows: -FJ E24-1982.FZ/T 3507.:393.1 Standard Field
Ramie Standard
Fy./T33002—2003
This standard specifies the requirements, test methods, inspection rules and markings, number, transportation and storage of pure hemp fabrics. 2 Normative References
The following documents become the terms of this standard through the reference of this standard. All documents of the date of use shall be in full (excluding the abandoned version due to the delay) or revised version in the near future and shall be in conformity with this standard. However, the parties who have not reached an agreement on this standard shall use the latest version of this document. All documents of the date of use shall be in full (excluding the abandoned version due to the delay) or revised version in the near future and shall not be in conformity with this standard. The referenced documents are applicable to the latest edition of this standard: 32, the first part of the identification of textile properties, the determination of breaking strength and new tear rate of strip samples GB/T4666 Determination of length change of woven fabrics GB/T14667 Determination of width of woven fabrics GB:T617 Numerical rules for density change of woven paper materials 3 Requirements 3.1 Classification 3.2 Technical requirements Technical requirements 3.2 Technical requirements 3.3 Technical requirements 3.4 Technical requirements 3.5 Technical requirements 3.6 Technical requirements 3.7 Technical requirements 3.8 Technical requirements 3.9 Technical requirements 3.10 Technical requirements 3.11 Technical requirements 3.2 ... 1 Grading rules
3.2.1.1 The grades of two hemp cloths are divided into substitute grades, first-class grades, second-class grades, and third-class grades. Those with fake third-class certificates are substandard products. 3.2.1.2 The grades of blue cloth are based on pieces. The new and wide cloths are graded in the market, and the density, breaking strength and other items are used as the grades of existing products. 3.2.1.3 Fabric organization: width, density, and breaking strength are shown in Table 1. Table 1 Fabric organization, width, density, and breaking strength are shown in Table 1.
Based on the material!
Please rate.
Change technical design regulations
Product price
Building property design item price
Involved in the appendix blood new fission power
Upgrade its formula design business
Conform to the design and installation requirements
Conform to the internal design production
-1.0 yuan
The cost meets the design requirements
Exceeds-1.14
One, etc.
Exceeds 5
Experience, the same as the individual Kaitai Fan Han Chuan price is a few, the yarn Jie degree does not meet the regulations, and the ten products can create points, this year can be divided into "products, etc., through the sweep product money to take the risk determination, etc., so that the classification does not allow the full cost of the steam standard to be processed, +2/T 33002-2003
3. 2. 1.4
Light grade
First grade
Second grade
3. 2. 1, 5
For the width grade, please refer to Table 2.
Table 2 Cloth surface grade score limit
G t--150 an or more--2 cm2t0 E--259 mu. 5
The thickness of the warp and yarn must be guaranteed or wrapped in accordance with 1 uniform heat standard: 3.2.1.6 In the surface grade standard
3.2, 1, 6. 1
The total score allowed per horse is (1)
The total score allowed per horse is 10 points per horse (/horse) per meter. The unit is 10 points per meter (10 points per meter): the length of the horse is in meters (m).
Calculate to 10 points and make B/T1. You are approximately an integer
3.2.1. Daily.2 Yuan deposits all the bottom points and the total score exceeds 10 points. For downgraded products, add 3.2 .1.5.3U.5I same name batch points or continuous support points 1u less downgrade.ti
3.2.1. No. 40.5 within half of the grinding more than the obvious measures, double Wei plus full piece score 1u is the same quality. 3.2.2 Fabric surface screening point scoring
3.2.2.1 Fabric surface bottom point inspection
Inspection standard world quality light is 41x-1 (center 1x. 3.2.2.1.1
Unit times tooth each boundary
250m 3.2.2.1.2 The scoring is based on the surface of the fabric, the number of fabrics and the shape of the mountain pattern. The fabric is positive according to the cross print, and the fabric is positive according to the cross print. The fabric is positive according to the straight line (\). The fabric is positive according to the vertical line (production). 3.2.2.1.3 When checking the strong points on the surface, the fabric should be flat on the work table. The inspector should stand beside the work table, with the stock and the point about 6 inches apart. The point that can be clearly seen is the most obvious point. 3.2.2.2 Scoring of pure points on the fabric surface
3. 2.2.2.1 The scoring of fabric points is shown in Table 3. The scoring of fabric points. Key point categories: After renting, obviously able to point, tea, weft, clear product low point/first point, stricter than point, not month product, Wu Guo rating, s, cn and above, 3, cm and above - half a grid and below, scoring effect, T, 5 T and F, each
7.5(m above.-15m each~
2. 5 cr with h -12,5 or12, 5 am with F25 e2, 5 c f.-12, 5 er
13. 3 cnF.-r width
more than half sink
sail is under
E root-bzxZ.net
key postal long road points when the occurrence, from the production points
purchase more than
1 and above
3.2.2.2.21m in the meter score display more than 10 evaluation. 3.2.2.2.3 various types of stupid points within the record B.3.2.2.2.4 customer clock system point name description record C. 3.2.2.3 Measurement rules for width
3.2.2.3.1 The width of the point is measured by the maximum length of the warp or weft direction. 12/1330022003
3.2.2.3.2 The width of the warp (longitude) is 1cm or less, and it is scored as one line. If the width exceeds 1cm, each: em is a line, and it is not necessarily 1cm.
3.2.2.3.3 If the warp is obvious, the length is more than 1rrl, and the passing score is re-scored according to Table 3. 3.2.2.3.4 If there are more than two points in a line within 52m in the warp (weft) direction, they will be scored according to the continuous length. 3.2.2.3.5 If there are two or more points in the warp (weft) direction (including points without network name) in a case, the dust is intermittent (spacing) When it is within 5cm, the score will be given according to the degree of the most or the least. 3.2.2.3.6 The broken into two rows (including the front and back) is divided into two rows, two rows and three rows, and the following is the broken or parallel row.
Explanation of the exact scoring points
3.2.2.4,1 The following points are used to distinguish between obvious and not obvious when scoring; 3.2.2.4.1.1 The density of the warp is obvious when the water is on the right, and the single is not obvious when the fragrance is eliminated. When there is a dispute, it is distinguished by the root. a) Zhangwei: The period of less than 2 warp yarns in the warp direction,) the warp is 5 or more dense. 3.2.2.4.1.2 The mixture of unobvious sparse weft and double weft is obvious sparse weft. 3.2.2.4.1.3 The tear marks that reach the standard column are obvious, and those that do not reach the standard but can be recorded are not obvious. 3.2.2.4.2. The machine will score eight points, including the material weft, age box, disassembly, repair, bad yarn, no hook, cloud weaving sleeve class, etc. 3.2.2.5. The scoring starting point of the following points is stipulated as follows: 3.2.2.5.1. The warts within 1cml of the edge will not be scored, the holes, rust stains, rottenness, hairiness, and jumps of 3.5m or more will be scored. If the points extend beyond the distance of 1cm, the score should be added. The length of the weaving standard cloth edge should be 3.3tr--℃.8cm. If it exceeds the specified length, 1 point will be awarded for each meter. 1 point will be awarded for each 2cm of the length that does not play a role in the edge. 3.2.2.5.2. The broken warp, silk, skipped yarn, sunken yarn, weft box and loose shrinkage), oil warp, oil weft, oil stains, Knots, hemp grains, and star jumps are not scored.
3.2.2.5.3 Small dots below 0.2 cm are not scored. Each one that is densely packed within 3m×3cm in the warp direction is scored 1 point. 3.2.2.5.4 Three weft shrinkages within 30cm are scored 1 point. 3.2.2.5.5 Each yarn of the fabric with a length of 1m or more and a length of 3<1m or more is scored (one in and one out is counted as one yarn).
Single-period weft change of 5m& or more is scored 1 point. Double weft or continuous double weft within 1m in the warp direction is scored according to the obvious symptoms between wefts. 3.2.2.5.6
3.2.25.71.3
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.