HG/T 20636.1-1998 Scope of responsibility of automatic control profession HG/T20636.1-1998 standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
International General Design System and Method
HG/T20636-1998
Specification for Engineering Management of Instrumentation1998-06-22Published
State Administration of Petroleum and Chemical Industry
Standard Exchange Network wm.bzsogo.comFree Download of Various American Standard Industry Data199901-01
Industry Standard of the People's Republic of China
Specification for Engineering Management of Instrumentation InstrumentationHG/T20636—1998
Editor: China Huanqiu Chemical Engineering CorporationChina Chengda Chemical Engineering Corporation
Approval Department: State Petroleum and Chemical Industry BureauImplementation Date: January 1, 1999National Chemical Engineering Construction Standard Editing Center1999 Beijing
Standard Photography Network
805O.cmWork Scope and Responsibilities of Automatic Control Professional Instrumentation HG/T20636.1—1998
Compiled by: China Huanqiu Chemical Engineering Corporation Approved by: State Petroleum and Chemical Industry Bureau Implementation date: January 1, 1999 Standard visual loss network cm.b2s6so.ccn Various standards industry information free download Compiled by:
Zhang Zhenji
Reviewed by:
Duanmu Xian Gao Xin Wang Ximing
Xie Changjie
Standard visual loss network cm.b2s6so.ccn Various standards industry information free download 1 General
1.0.1 This regulation stipulates the work of the automatic control specialty in each stage of the engineering project and clarifies the scope of responsibility of this specialty.
1.0.2 This regulation applies to the work of the automatic control specialty in the design, procurement, construction, start-up and assessment and acceptance, as well as design management, basic work and technical development work. 1.0.3 When implementing this regulation, it shall also comply with the provisions of the relevant national standards. Standards for network replacement mm.bsono.comy Free download of various American standard industry materials 2 Preliminary design work
Feasibility study (including pre-feasibility study) 2.1.1 In the feasibility study stage, the automatic control major is responsible for formulating the following contents: automation level;
2 Principles for the selection of main instruments;
3 Propose the conditions for the investment estimation of instruments; www.bzxz.net
4 Propose the conditions for the preparation of feasibility study reports to relevant majors. 2.1.2 Complete the feasibility study report of this major. 2.2 Project quotation
In the project quotation stage, the automatic control major is responsible for formulating the following contents: control scheme;
Design principles, adopted standards and specifications; 3
Instrument selection;
Cooperate with the budget estimate major to make estimates of equipment and material costs; Estimation of design and installation workload and costs: Propose the conditions for the preparation of project quotations to relevant majors. Complete the project quotation documents of this major.
Standard Exchange Network mm.bzsom.com. Free download of various American standard industry data 3. Imported project work
3.0.1 In the introduced project, the automatic control major is responsible for the following work: Participate in technical exchanges with foreign companies:
2 Responsible for the negotiation of technical annexes of the contract. Formulate design principles, scope of supply, equipment delivery, design division of labor and design documents, and discuss the list of suppliers recommended by the foreign party; participate in design liaison, equipment inspection and design review; 3
Participate in cooperative design, return package design and DCS software configuration. 3
Standard exchange network
All kinds of standard industry loading free download
4 Design work
4.1 Basic design/preliminary design
4.1.1 In the basic design/preliminary design stage, the automatic control major is responsible for the following work: 1 Complete the basic design/preliminary design specification to formulate the technical plan of the control system and interlocking system, the instrument selection regulations, and the power supply and gas supply plan;
2 Complete the preliminary instrument list, the control room plan layout and the instrument panel front layout plan, and carry out preliminary inquiry work;
3 Complete the process control flow chart ((PCD): 4 Propose the system configuration plan of DCS:
5 Cooperate with the process system major to complete the first version of the pipeline instrument flow chart (P&ID); Propose design conditions to relevant majors.
4.2 Engineering design
4.2.1 In the engineering design stage, the automatic control major should be responsible for the design work of the following contents: 1 Responsible for production Design of computer systems for detection, control, alarm, interlocking/parking and monitoring/management of production equipment, auxiliary engineering and public engineering systems;
2 Responsible for the selection and design of detection instruments, control systems and their auxiliary equipment and installation materials; 3 Responsible for the installation and design of detection instruments and control systems: 4 Responsible for the system configuration, functional requirements and equipment selection of DCS, PLC, ESD and upper computer (monitoring, management), and responsible for or participate in the preparation of software; 5 Responsible for the design of environmental protection measures for field instruments; 6 Accept the design conditions of processes, systems and other leading disciplines, and propose design conditions for equipment, piping, electrical, civil engineering, HVAC and water supply and drainage.
7 Responsible for the design of control rooms, analyzer rooms and instrument repair workshops; 8 Responsible for the design of factory production process metering systems. 4
Standard exchange network 0
B080.n Free download of various standard industry materials 5.0.1
Instrument procurement work
In instruments During the procurement stage, the automatic control major is responsible for the following work: submitting purchase documents such as purchase requisitions, instrument technical manuals and instrument data sheets; cooperating with the procurement department to carry out technical bid evaluation: participating in the vendor coordination meeting (VCM) to review and confirm the vendor's documents; participating in the inspection of instrument equipment;
cooperating with relevant majors to carry out price inquiry, bid evaluation and contract negotiation for the instrument part of the complete set of equipment. Standard Jieti.com 362806066 Free download of various relevant standard industry materials 6.0.1
6 Construction site work
During the construction stage, the automatic control major is responsible for the following work: conducting design briefings to the construction unit; sending design representatives to the site to cooperate with the installation, adjustment and start-up of the instruments; promptly handling problems raised on site and providing technical services: 3
Summary of on-site construction, commissioning and start-up; completing completion drawings (if necessary) and design return visits 6
Standard Exchange Regulation.com 3628060/66 Free download of standard industry materials 7 Design management work
In terms of design management, the automatic control major should do the following work: 7.0.1
Responsible for estimating and controlling the man-hour consumption of this major, and allocating manpower according to the workload and progress requirements of the project: 1
2 Prepare a detailed design schedule for this major in accordance with the overall progress plan of the project, and carry out design cost and progress control;
3 Carry out design quality control in accordance with the ISO9000 quality assurance procedures; when the design is completed, the design documents should be archived according to the prescribed procedures and a design completion report should be prepared. Standard Jiehuan Network
con Free download of various standard industry building materials
Basic work and technical development work
8.1 Basic work
8.1.1 The automatic control major should do the following basic work: 1 Responsible for the preparation/revision of standards, specifications, manuals, atlases and computer programs for this major; 2 Technical position training for professionals. 8.2 Technical development work
The automatic control major should do the following technical development work: 8.2.1
Participate in experimental research and technical development work related to engineering projects; 2 Formulate the development plan of this major.
标摄换网.bz80B0.com
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.