title>JB/T 8024.2-1999 Machine tool fixture parts and component fixing handles - JB/T 8024.2-1999 - Chinese standardNet - bzxz.net
Home > JB > JB/T 8024.2-1999 Machine tool fixture parts and component fixing handles
JB/T 8024.2-1999 Machine tool fixture parts and component fixing handles

Basic Information

Standard ID: JB/T 8024.2-1999

Standard Name: Machine tool fixture parts and component fixing handles

Chinese Name: 机床夹具零件及部件 固定手柄

Standard category:Machinery Industry Standard (JB)

state:in force

Date of Release1999-08-06

Date of Implementation:2000-01-01

standard classification number

Standard ICS number:General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)

Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture

associated standards

alternative situation:JB/T 8024.2-1995 (original standard number GB/T 2221-1991)

Publication information

other information

Focal point unit:Mechanical Science Research Institute

Introduction to standards:

JB/T 8024.2-1999 JB/T 8024.2-1999 Machine tool fixture parts and components fixed handle JB/T8024.2-1999 Standard download decompression password: www.bzxz.net

Some standard content:

ICS 25. 080. 01
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06Promulgated
State Bureau of Machinery Industry
Implementation on 2000-01-01
1 Scope
Machinery Industry Standard of the People's Republic of China
Parts and units of jigs and fixtures
The parts and anits of jigs and fixturesFixed handie
This standard specifies fixed handies with specifications of 5~20mm. 2 Reference standards
JB/T8024.2-1999
Replaces JB/T8024.2-1995
The provisions contained in the following standards constitute the provisions of this standard by citing them in this standard. At the time of publication of this standard, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T700-1988 Carbon structural steel
JB/T8044--1999 Technical requirements for machine tool parts and components 3 Dimensions
The dimensions are shown in the following figure and table.
Straight grain m0.3
Approved by the State Bureau of Machinery Industry on August 6, 1999 and implemented on January 1, 2000
4 Technical conditions
JB/T8024.2—1999
4.1 Material: Q235-A in accordance with GB/T700. 4.2 Other technical conditions in accordance with JB/T8044. 5 Marking
5.1 Marking example:
Fixed handle with D-8mm and L=80mm:www.bzxz.net
Handle 8×80JB/T8024.2-1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.