Some standard content:
GB17654-1999
1. Appendix A to this standard, "Description of the Design of the Flag of the Macao Special Administrative Region of the People's Republic of China", is compiled in accordance with Article 10 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China and the relevant provisions of the "Draft Basic Law of the Macao Special Administrative Region of the People's Republic of China" and relevant documents and the relevant provisions of the subsequent works. 2. This standard is based on the Annex 1 of the "Interim Measures for the Use of the Flag and Emblem of the Macao Special Administrative Region of the People's Republic of China" "Instructions for the Flag of the Macao Special Administrative Region of the People's Republic of China" adopted at the Fifth Plenary Session of the Macao Special Administrative Region Committee of the National People's Congress on January 16, 1999, which formulates the technical requirements for the shape, pattern, standard size and other technical requirements of the flag of the Macao Special Administrative Region of the People's Republic of China, and includes this document as Appendix B of this standard. 3. The important technical parameters of the flag made of various fabrics in this standard, such as color fastness, standard size and allowable reading error, five-star yellow chromaticity value, flag appearance evaluation, flag sewing, etc., refer to the corresponding indicators in GB12982-1996 "National Flag", GB12983-1991 "Standard Sample of National Flag Color" and GB/T17392-1998 "Fabrics for National Flag". Appendix A, Appendix B and Appendix C of this standard are the appendices of the standard. This standard was proposed by the State Council Hong Kong Affairs Office and the State Quality and Technical Supervision Bureau. This standard was proposed by the Standardization Department of the State Administration of Quality and Technical Supervision. Who is responsible for drafting this standard: National Technical Committee for Standardization: Main contributors: Sun Xiuru, Qi Yamin, Zheng Zhenglin, Han Yue, Zhou Xiaoping, Sun Pei. wm1 Scope
National Standard of the People's Republic of China
Regional flag of Macao Special Administrative Region
Regional flag of Macao Special Administrative RegionGB17654—1999
This standard specifies the technical requirements, test methods, inspection rules, packaging and marking of the regional flag of the Macao Special Administrative Region of the People's Republic of China (hereinafter referred to as the regional flag).
This standard is applicable to flags made of chemical fiber fabrics (excluding artificial fiber fabrics and silk), and is also applicable to flags made of cotton, wool and linen fabrics. The appearance quality control of flags made of paper, plastic and other materials should also refer to this standard. 2 Referenced standards
The provisions contained in the following standards constitute the text of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards. GR250--1995 Charcoal color sample card for evaluating discoloration (id11SO105/A02:1993) GB/T 39211--1997 Test for color fastness of fabrics to washing color year: test 1 (envIS0 105/C01.1989) GB/T 3921.3—1997 Textiles: Test for colour fastness to washing - Test for colour fastness to washing 3 (eqvIS) 105/C03; 1989) GB/T 3979-1997 Method for measuring colour of objects
GI3/T8427--1998 Textiles: Tests for colour fastness - Color fastness to artificial light - Xenon arc fading lamp (ne9 ISO105/B021994) GB/T 8430---1998
3 Textiles: Tests for colour fastness - Xenon arc fading lamp (neqISO105/B04:1994) G1312983-1991 National flag colour standard sample GB/T17392—1998 Fabrics for national flags
3 Definitions
This standard adopts the following definitions.
3.1 The flag of the Macau Special Administrative Region
refers to the white flag with five stars, lotus, bridge and sea water on it, which represents the Macau Special Administrative Region established by the People's Republic of China. 3.2 Lotus White
refers to the white color with a specific reflectance ratio of the lotus, bridge and sea water on the Macau Special Administrative Region flag. 4 Requirements
4.1 Flag shape and pattern
4.1.1 The flag shape and pattern shall comply with the relevant provisions of the Basic Law of the Macau Special Administrative Region of the People's Republic of China and the Explanation of the Flag Pattern of the Macau Special Administrative Region of the People's Republic of China, see Appendix A. The flag pattern of the Macau Special Administrative Region of the People's Republic of China is shown in Figure! 4.1.2 The flag pattern is symmetrical with the center line of the length of the flag as the axis, see Figure 2. Approved by the State Administration of Quality Supervision, Inspection and Quarantine on February 1, 1999, and implemented on March 1, 1999
GB17654
Figure 1 Design of the flag of the Macao Special Administrative Region of the People's Republic of China 4.2 Dimensions and allowable errors of various parts of the standard flag 4.2.1 Dimensions of various parts of the standard flag conform to the relevant provisions of the "Instructions for the Flag of the Macao Special Administrative Region of the People's Republic of China". See Appendix B.
4.2.2 Dimensions and allowable errors of various parts of the standard flag are shown in Table 1 and Figure 2. 4.2, 3 Analytical diagrams for the production of standard flags are shown in Appendix (. Flag
Big five-pointed layer
Distance from the top of the flag
Distance from the top of the lotus
Diameter of the outer circle of the big five-pointed star
Diameter of the outer circle of the small five-pointed star
Total length of the lotus
Distance from the tip of the lotus to the big five-pointed star Distance from top of bridge
Distance from bottom of seawater to bottom of Bin surface
Height of white bridge
Height 1
(Green part)
(Self-colored part)
Flagpole cover
Height 2
Height 3
Height garden
Height 1
Height 1
Height 3
Code in Figure 2
GB 176541999
Dimensions and allowable errors of the various parts of the flag of the promotion area No. 1
288030
2409+24
1920+20
360112
1-16±6
972±10
422±12
33—4
33—1
25—3
16—2
1 600 + 16 | 440-1B
960+15
1280+131
240±8
167±6
140±6
281±8
22-·2
960-12
180±6
125±5
105±4
486±5
18 on 2
211±6
16—2
20—2
1920+1001600+1001280+100: 960—8080~85
G0-~65
120±4
324±4
141±4
11—2
Signature English
300+6210+4150+3
200+4140+3100+2||tt| |26±219±2
15±211±2
101±271±2
640+50200+40140+5100-
40--45
15--2510-- 16 R--12
GB17654—1999
Figure 2 Dimensions of various parts of standard regional flag
GB 17654—1999
4.2.4 When making regional flags of non-standard size due to special needs, they shall be enlarged or reduced in proportion to the size of the standard regional flag and the allowable error. 4.3 Fabrics for regional flags
The fabrics used to make regional flags shall comply with the relevant provisions of GB/T17392. 4.4 Flag color and allowable error
4.4.1 Flag edge color: The green chromaticity value and allowable color difference of the flag made of chemical fiber fabric and silk are shown in Table 2. Table 2 Green chromaticity value and allowable color difference of the flag (I)s light source) material
chemical fiber fabric
chromaticity coordinates
allowable color difference
are both 4%4.
4.4.2 Five-star yellow: The five-star yellow of the flag of the district made of chemical fiber fabrics and silk screen shall be based on the five-star yellow of chemical fiber fabrics and silk in GB12983. When evaluated according to GB250, the color difference shall not be less than 3~4 levels. 4.4.3 White floral pattern: The stimulation value Y. of the white floral pattern of the district flag made of chemical fiber fabrics and silk screen shall not be less than 70. 4.4.4 White flagpole cover: The white flagpole cover in GB12983 shall be based on the five-star yellow of chemical fiber fabrics and silk screen. When evaluated according to GB250, the color difference shall not be less than 3~4 levels.
Metal or plastic rings that are in harmony with the color of the flag and flagpole cover can be placed at appropriate positions on the upper and lower ends of the flagpole cover. The length of the flagpole cover can be appropriately longer than the flag.
4.4.5 The green color of the flag of the district made of cotton, wool and linen fabrics shall be consistent with the provisions for chemical fiber fabrics in 4.4.1 of this standard. The white color of Lianhua, Daqiao and seawater is consistent with the provisions in 4.4.3 of this standard. The yellow color of the five-star flag is consistent with the five-star yellow color of chemical fiber fabrics in GJ312983. The color difference shall not be less than 3~4 levels when evaluated according to GB250. 4.5 Color fastness of the district flag
The color fastness of the district flag is shown in Table 3.
Table 3 Color fastness of regional flags
Chemical fiber fabrics
Color fastness to artificial light
Color fastness to artificial weather
Color fastness to washing (original color)
Color fastness to human light
Color fastness to human weather
Color fastness to washing (original color)
Grade 3~4
Grade 3--4
Regional flags made of cotton, wool, and linen fabrics shall have a color fastness not lower than the requirements for silk materials in Table 3. 4.6 Sewing of regional flags
4.6.1 Standard regional flags are not allowed to have splicing seams on the flag surface. 4.6.2 The seams around flags No. 1 to 5 and car flags shall be double-threaded, and wool yarn shall not be exposed at the seams. White Blue Blue
3~4 Level
3--4 Level
3~4 Level
4.6.3 Around the flag, the number of stitches at the joint between the flagpole cover and the flag surface is 34~42 stitches per 100mm, and the stitches are straight and wrinkle-free.
4.7 Appearance Evaluation of the Flag Surface
The appearance evaluation of the regional flag surface is carried out on a per-flag basis. The evaluation requirements are shown in Table 4. Items
Green part
Yellow and white part
Color difference between the upper, middle and lower parts of the flag
Appearance of the flag
5 Test method
GB17654-1999
Table 4 Evaluation requirements for the appearance of the flag
No obvious stain, color matching, color spectrum, drum strips are allowed. No clear mark or color reading is allowed. Five stars, flowers, bridges, and sea water are not allowed to have obvious unclear circles. When evaluating according to GB 250, it is not allowed to follow level 4, which is equivalent to 2E% = 2.0. White, deep edges and weaving defects with obvious shadow appearance are not allowed on the dense surface. It is not allowed to attach decorations, text or other pictures on the flag (including the front and back sides) and the surrounding area. 5.1 The colorimetric measurement method of the chromaticity value of the edge color in the flag and the stimulus value Y1o of the white in the flag shall be carried out in accordance with the provisions of CB/T3979. The measurement results are expressed in accordance with the provisions of GB/T 3979, and the inhibition measurement value is expressed in terms of the stimulus value Ym.2tn,1. 5.2 The five-star yellow color difference evaluation method in the flag surface is carried out in accordance with GB250. 5.3 Color fastness test method
5.3.1 The color fastness test to artificial light is carried out in accordance with 6.2.3 of GB/T8427-1998. 5.3.2 The color fastness test to artificial weather is carried out in accordance with 6.4 of GB/T8430--1998. 5.3.3 The color fastness to washing of silk is carried out in accordance with the provisions of GB/T3921.1. Cotton and chemical fiber fabrics are carried out in accordance with the provisions of GB/T3921.3.
5.4 The measurement of the size and allowable error of each part of the standard flag is carried out with qualified tools with an accuracy of not less than 0.5%. 5.5 The flag appearance assessment test is conducted under bright natural light at a distance of 1 to 1.2 meters from the flag. The visual judgment is conducted. When using light inspection, the illumination of daylight fluorescent lamps should be no less than 7501x6 Inspection rules
6.1 The shape, pattern and size of each part of the flag, the appearance assessment of the flag, the color change quality, and the sewing of the flag are factory inspections. When the material, dye, or process changes, a type inspection should be conducted. 6.2 The number of samples for inspection of each batch of products is 2% of the total number of products in the batch, but shall not be less than 10; samples shall be randomly selected. 6.3 In the inspection of each batch of products, if all the inspection items of each sample are qualified, the sample shall be judged as qualified. When all the samples are qualified, the batch of products shall be judged as qualified products, otherwise they shall be unqualified products. Unqualified products shall not be shipped. 7 Packaging and marking
7.1 Each flag of the district shall be packaged separately, and the product name, specification, material, name and address of the manufacturer, trademark, and number of the national standard implemented shall be indicated on the packaging.
7.2 The outer packaging of batches of regional flags should ensure that the quality of the finished product is not damaged and is convenient for transportation. The outer packaging should indicate the product name, specifications, materials, quantity, name and address of the manufacturer, trademark, external dimensions, weight, and safe transportation mark. 7.3 Each regional flag should bear the manufacturer's trademark. The trademark is placed at the bottom of the flagpole cover. The dimensions of the logo in each direction shall not be greater than the width of the flagpole cover. The logo of the car flag, signature flag, and table flag can be pasted and printed on the lower right side of the flagpole cover or on the lower right side of the outer packaging bag of the single-sided regional flag. GB 17654 - 1999
Appendix A
(Appendix to the standard)
Description of the design of the flag of the Macao Special Administrative Region of the People's Republic of China The regional flag of the Macao Special Administrative Region is a green flag with five stars, lotus, bridge, and sea water patterns. (Quoted from Article 10 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China) The regional flag of the Macao Special Administrative Region is a green flag with five stars, linked flowers, bridge, and sea water patterns in the middle. Macao is an inseparable part of the motherland. The five stars symbolize the unity of the country. The lotus is deeply loved by the residents of Macao. It is about to bloom under the shining of the five stars, implying that Macao will prosper in the future. The three petals of the connected flower represent the three islands that make up Macao. The bridge and the sea reflect the characteristics of Macao's natural environment. (Quoted from "Explanation on the Basic Law of the Macao Special Administrative Region of the People's Republic of China (Draft)" and related documents and drafting works") Appendix B
(Appendix to the standard
Explanation of the flag of the Macao Special Administrative Region of the People's Republic of China
(Quoted from Annex 1 of the "Interim Measures for the Use of the Flag and Emblem of the Macao Special Administrative Region of the People's Republic of China") The shape and color of the flag are the same on both sides. The five stars, lotus, bridge and sea water patterns on the flag are opposite to each other on both sides. For convenience, this document only uses the side with the flagpole on the left. The flag stalls are explained. For the flagpole on the right side, they should be made accordingly. 1. The flag is green and rectangular, with a ratio of three to two in length and height. A white lotus composed of three petals is painted in the middle of the flag. There are golden five-pointed stars above the lotus - one large and four small, with two small five-pointed stars on each side of the large five-pointed star in the middle. Below the lotus is a white bridge and green and white seawater that gradually changes from near to far. The regional flag pattern is shown in Figure B1. Figure B1 The flag pattern of the Macao Special Administrative Region of the People's Republic of China The general sizes of the regional flag are set as follows: 1 No. 2: 288 cm long and 192 cm high.
No. 2: 240 cm long, 160 cm high
No. 3: 192 cm long and 128 cm high
No. 4: 114 cm long and 96 cm high.
No. 5: 96 cm long and 64 cm high.
Car flag: 30 cm long and 20 cm high,
Signature flag: 21 cm long and 14 cm high.
Table flag: 15 cm long and 10 cm high.
GB176541999
When making flags of different sizes due to special needs, they should be enlarged or reduced in proportion to the general scale. Three,Regional flag pattern positioning diagram
Figure B2 Regional flag pattern positioning diagram
Appendix C
(Standardized Appendix)
Analysis and standard data for making regional flag of Macao Special Administrative Region of the People's Republic of China
C1 The flag is a rectangle with a length-to-height ratio of 3:2. A rectangular coordinate system is established with the fold line of the height and length of the flag as the horizontal and vertical axes. The origin is located at the center of the flag.
Draw a pattern auxiliary circle with 0 as the center and 0 as the diameter. The patterns on both sides of the coordinate vertical axis in the pattern auxiliary circle are drawn accordingly (Figure C1). H
Flag length
Flag height
Center position of auxiliary pattern in the middle of the flag
Diameter of auxiliary circle of pattern in the middle of the flag
Flag length
Flag height
Code in Figure C1
Code in Figure C1
Center position of auxiliary circle of pattern in the middle of the flag
Diameter of auxiliary circle of pattern in the middle of the flag
GB 17654— 1999
Figure ℃1
Abstract coordinate
Vertical coordinate
Abstract coordinate
Abstract coordinate, ordinate
Vertical coordinate
Abstract coordinate
Lazy coordinate
Vertical coordinate
Signature flag
Abstract coordinate
Abstract coordinate
Vertical coordinate
C2 Draw three auxiliary circles with diameters of with 0 and 00 as the center, and draw an auxiliary circle with diameter of with 0 as the center. Connect the arcs to form the central lotus petals (Figure C2). and
center position of central flower auxiliary circle
center position of central flower auxiliary circle
center position of central flower auxiliary circle
center position of central flower auxiliary circle
center diameter of central flower auxiliary circle
center position of central flower auxiliary circle
center diameter of Chinese flower auxiliary circle
center position of central flower auxiliary circle
center diameter of central flower auxiliary circle
code in Figure C2
code in Figure C2
GB17654 —1999
Vertical coordinate
Abstract coordinate
—199
—118
Horizontal mark
Vertical coordinate
Abstract coordinate
Dust markbZxz.net
—288
Abstract coordinate
Vertical coordinate
Abstract coordinate
Abstract coordinate
Vertical coordinate
Signature
Abstract coordinate
Model coordinate vertical wall mark
GB 17654—1999
C3 is 0,0,,0. Draw three auxiliary circles with diameters of 00, 00, and three auxiliary circles with true diameters of 00, 00, and then draw an auxiliary circle with diameters of 00, 00, and connect the arcs to form the left and right flower arrangements (Figure C3). Figure C3
In C3
The first position of the left flower auxiliary circle
The second position of the left flower auxiliary circle
The center of the left flower auxiliary circle
The first, second, and third diameters of the left flower auxiliary circle
The fifth position of the left flower circle
The sixth position of the left flower auxiliary circle
The fourth, fifth, and largest diameters of the left flower auxiliary circle
The fourth position of the left flower auxiliary circle The code of the diameter of the left side of the flower incubation auxiliary garden is tt. The horizontal coordinate is tt. The vertical coordinate is -339. The horizontal coordinate is tt. The vertical coordinate is -404. The horizontal coordinate is tt. The vertical coordinate is tt. The horizontal coordinate is tt. The vertical coordinate is -404. The horizontal coordinate is tt. The vertical coordinate is -121. The horizontal coordinate is 142. The horizontal coordinate is 247. The vertical coordinate is 205. The pseudo-coordinate is
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.