GB/T 2885.5-1981 Basic parameters and dimensions of metal ore flatbed cars
Basic Information
Standard ID:
GB/T 2885.5-1981
Standard Name: Basic parameters and dimensions of metal ore flatbed cars
Chinese Name:
金属矿平板车 基本参数及尺寸
Standard category:National Standard (GB)
state:Abolished
Date of Release1981-01-02
Date of Implementation:1982-07-01
Date of Expiration:2009-02-01
standard classification number
Standard ICS number:Mining and Mineral Products >> 73.100 Mining Equipment
Standard Classification Number:Railway>>Railway Vehicles>>S56 Narrow Gauge Industrial and Mining Railway Vehicles
Publication information
publishing house:China Standards Press
Publication date:1982-07-01
other information
Release date:1981-12-31
Review date:2004-10-14
Drafting unit:Beijing Nonferrous Metallurgy Design and Research Institute
Focal point unit:National Technical Committee for Standardization of Mining Machinery
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 2885.5-1981 Basic parameters and dimensions of metal ore flatbed trucks GB/T2885.5-1981 standard download decompression password: www.bzxz.net
Some standard content:
The People's Republic of China
National Standard
Metal Ore Flatbed Truck
Basic Parameters and Dimensions
This standard applies to underground metal mines or other mines. The basic parameters and dimensions of metal ore flatbed trucks used to transport equipment or other items along underground tunnels and surface industrial sites should comply with the provisions of the table. Note: This figure only shows the dimension symbols.
State Administration of Standards
State Administration of Nonferrous Metals Industry proposed to implement on July 1, 1982
Beijing Nonferrous Metallurgy Design and Research Institute
Total 3 pages Page 2
YPC1-6
YPC3-6
YPC3-7
YPC5-6
YPC5-7
YPC5-9
Load
GB2885.5-81
Note: Height H and traction height h are measured from the rail surface (when unloaded) 14
Traction height
YKAO KAca
Traction
(not too large
The model of the metal ore flatbed car is stipulated as:
GB2885.5—81
Marking example:
Load capacity 3t, track gauge 600mm metal ore flatbed car YPC3-6 flatbed car GB2885.5-81
Total 3 pages Page 3
Track gauge code: 6 means 600mm
7 means 762mmwww.bzxz.net
9 means 900mm
Load code (t
Mine car code
Flatbed car code
Metal ore code
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.