HG/T 2034-1999 Industrial manganese acetate HG/T2034-1999 Standard download decompression password: www.bzxz.net

1C871. 080. 30
Chemical Industry Standard of the People's Republic of China
Organic Chemical Products
(1999）
Published on 1999-06-16
Implemented on 2000-06-01
Published by the State Administration of Petroleum and Chemical Industry
ICS 71. 080. 99
Registration No.: 3731-1999
IIC/T 2034-1999
The standard is revised from the chemical industry standard HG/T 203491.L lithium megaacetate. The main technical differences between this standard and HGI 2044 are as follows: military, daily heavy metals (measured in Pb), zinc item after. The name of the test ammonium precipitate (in terms of sodium chloride) was changed to gold reduction and gold screen: the oxidation number (in terms of I> index of superior products was changed from less than or equal to 0.003% to less than or equal to + C.C02%, and the guarantee index was increased. The superior products, first-class products and qualified products were all less than 0.08%. The determination method provided was changed from the visual colorimetric method to the hand absorption spectrometry method. From the implementation of the standard in 2001, it replaced 1IG/T3034-91. This standard was proposed by the National Technical Committee on Chemical Standardization. This standard is under the jurisdiction of the National Technical Committee on Chemical Standardization: The unit that drafted this standard is Dalian Juxing Organic Chemical Co., Ltd. (the first organic chemical factory of the People's Republic of China). The participating drafting units of this standard are Nanjing Chemical Reagent Factory, Yizheng Chemical Fiber Lairun Special Chemicals Co., Ltd., Liaoyang Hongwei Heying Energy Co., Ltd. This standard mainly involves the planning and design of the standard, and the standard is entrusted to the organic branch of the Chemical Standardization Technical Committee of the People's Republic of China for interpretation. 41
Chemical Industry Standard of the People's Republic of China
Industrial Manganese Acetate
Manganese Acetate for iadutilal useIG/T 2034
Replaces HG/T/20349
This standard specifies the requirements for industrial acetic acid, including test methods, inspection, testing, storage, etc. This standard is applicable to industrial acetic acid obtained by reacting with raw acetic acid. This product is used as a oxidizing agent for producing building materials, deep acetic acid, etc.
Molecular weight: MCH, COO), *4H, O
Molecular mass: 1C according to the international atomic mass 2 Reference standards
The following standards contain the provisions that are quoted in this standard and shall constitute the remainder of this standard. The versions shown are valid at the time of publication. All standards will be revised. Parties using this standard should explore the possibility of using the following standard morning new version, 60188
GE/Te0?
1 Titration analysis (solution analysis) Preparation of standard solutions for chemical weapons
Chemical Chengsu
Chemical test
Preparation of standard solutions for affinity determination (1S) 5.1..1.1: 1982) Preparation of preparations and products used in test methods (EN 5065-1: 15822 Expression and judgment of limiting effect
GR/7: 6678-86
e67!35
3 Requirements
6682-92
General topic of sampling of chemical products
Appropriate chemical. 1. General rules for product samples
Specification and test methods for laboratory use (MenTS () H5: 147) 3.1 External porridge: red porridge,
3. 2T industrial acetic acid chain disk should meet the requirements of Table 1" Requirements
2 Commercial MCHCOOHO measured by quantity
Water does not usually contain
Light: Contains
INi contains
Limited metal surface alkali content
4 Test method
, uc :bzxZ.net
Today's grid
The reagents and water used in the standard shall be the same as those used in the standard. Unless otherwise specified, the water shall be the same as that used in the standard. The reagents and water used in the standard shall be the same as those used in the standard. Unless otherwise specified, the water shall be the same as that used in the standard. The reagents and water used in the standard shall be the same as those used in the standard. Unless otherwise specified, the reagents and water used in the standard shall be the same as those used in the standard. When there are special requirements, the preparation shall be in accordance with GB/T601.GB/T632.GH603. 4.1. Sub-determination of acetaldehyde manganese content. 4.1. Method: In the presence of oxygen-activated buffer solution, the sample is titrated with FDTA standard titration, and the change in the color of the indicator is used to determine the full point of the titration: the content of acetic acid is calculated based on the volume of the consumed standard titration solution. 4.2. Test solution. 4.2. 1. Pick cyclohexane,
4.1.2.2-Ascorbic acid buffer
4.1.2.3 Ethylenediaminetetrakis disodium (EDT4) standard titration solution: rFTTA: 0.1m0./L.4.1.2.4 Chrome black indicator solution.
4.1.3 Analysis steps
Weigh 0.6g of sample (accurate c.0902g) into 250ml of water, add 130ml of water, titrate with about 20% chromium hydroxide standard solution, add 0.1g ascorbic acid, 1mL ammonium hydroxide solution and 2 drops of chromium black indicator solution, continue titrating until the color of the solution decreases from red to blue, which is the flash point. The blank test was carried out in the same way. 4.1.4 Analysis results were expressed as a percentage of the original amount of acetic acid short [in terms of Ma (CIIC (O)); 4H, O containing (X, calculated according to formula (1)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.