JB/T 8535-1997 This standard specifies the structural type and basic parameters, technical requirements, test methods, packaging, transportation and storage of tubular electrostatic precipitators. This standard applies to the following scopes: a) The gas volume treated is not more than 5×104m3/h (standard state); b) The working temperature is not more than 45℃; c) The working pressure is -73×102~0Pa; d) Tubular electrostatic precipitators for sulfuric acid production with an ambient temperature of -30℃~40℃ and a relative humidity of 100%. This standard is not applicable to the treatment of flammable and explosive flue gases (flammable and explosive flue gases should be specially treated). When the designed working conditions exceed the scope of application of this standard, its quality indicators should be specified in the technical documents of the product (such as the technical agreement). JB/T 8535-1997 Tubular electrostatic precipitator JB/T8535-1997 Standard download decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
JB/T8535—1997
Tubular Electrostatic Precipitator
Published on April 15, 1997
Ministry of Machinery Industry of the People's Republic of China
Implementation on January 1, 1998
JB/Y 8535--1997
This standard is issued by the Environmental Protection Machinery Standardization Technical Committee of the Ministry of Machinery of Shanhaiguan City, and the quality of the electrostatic precipitator is not zero. The unit of this standard is a chemical factory in Changzhou City. The standard is to be entrusted by the Ministry of Environmental Protection and Standardization Technical Committee of the Ministry of Environmental Protection and Standardization Technical Committee of the Ministry of Environmental Protection. Scope
Machinery Industry Standard of the People's Republic of China
Tubular Electrostatic Precipitator
JD/TA535-1997
The whole standard specifies the service life of tubular single-type electric precipitators, technical requirements, test methods, including tables, specifications and storage: This standard can be used in the following ranges
a) The processing gas volume is not less than × 16m/ (international standard carbon state b) The temperature is increased by 15℃:
J731~oPa:
d) does not cause the temperature to be 34℃. The relative humidity is 100℃. The sulfur slow production service type defogger is not applicable to the flammable and explosive smoke. It is the flammable and explosive smoke that is handled by the skin. When the design and treatment of the door exceeds the appropriate scope of this standard, its quality index is originally established in the technical table of the product (the more dense the technical agreement, the more dense the party,
2 referenced standards
the following standards are included in the vehicle standard and are introduced as vehicle standard flow clauses. When this standard is published, the new version is effective: all standards will be revised when the vehicle is used. The following super weak version is possible G5 38880-8
GB/T 139!1 92
ZR K46 388.1. 88wwW.bzxz.Net
3 Dimensions and basic parameters
3.1 Dimensions
Electrostatic demister performance test method
Electrostatic demister performance test method
High-tech electrostatic demister equipment
3.1.1 According to the material, the electrostatic demisters are divided into two types: anodized and plastic. Among them, the plastic electrostatic demisters are divided into tube type and belt type
3.1.2 The electrostatic demister consists of a main body and a power supply part. The main body equipment includes gate system, anode system, cleaning system, exhaust, exhaust, shell, that is, airflow distribution device, Research drawing] Approved by the Ministry of Machinery Industry on April 15, 1997, implemented on January 1, 1998, IR/T8535·1997, series type electric elimination, tt||tE series type automatic elimination, add thanks, tt||5, 24 packing road: 3: mountain: tt||5-Sichuan hot president: 6-our system: --occupying sinking system diagram 1, point source part is not: it is a complex package source with star power control, high illumination implementation 32, tt||3.2.1 garbage cost efficiency according to Table 1. 8535—1997
3* .2.75.90.52.123.1t1.355,t7+.17h.187.2 5.270.330.3+su.120.J.t5.J7/.215,3u3.805.53u.3.12 comfortable
TILTmL
light out type rental equivalent to our standard No. 2 regulations
period line length
open level soft
3.2. 3 insulation box electric device outside the school according to the requirements of the loss 3 type
insulation image heating device model
3.2. + use power supply
3. 2. 4.1
Plastic 3 tube
The ancient English device is powered by a high-voltage boundary source, Liuhe
37-- 3±3
Manpan line
32.4.2 is available for you to use! The DC circuit is based on the positive grade DC current ratio and should be treated as 1K458.【,88 2. Single current product teaching method
Tube efficiency: see the three pull-number length display
Intelligent type name: Use Ningmu and G2 to represent the dead tube type and tube history type structure respectively. Material: Monthly mark and system mark indicate lead plastic electric demister
to 1,>WQG1330 clothing shows lead page tube type 330 tube mouth demister Example 2: IIWS.H ticket plastic belt table 86 tube electric demister 4 technical requirements
4. 1 Dangerous fog effect check
In the case of joint design work, the flexible use of first-level electric demister includes the purchase fee of no more than. Standard state), use second-level electric wing curtain! The acid content is not large, Cm, etc., according to the user requirements, the two parties in the technical cooperation in the net 4.2 long reduction
enterprise management platform efficiency plan, the electrostatic demister body H reduction is not people card cra: 4.3
demister parts slip rate is not less than 1%,
JD/T8515--1997
plastic electricity price re-flow voltage is not less than 55kV, or the secondary current is full load. The DC output voltage of the demister is not less than ice or the secondary current is drum, 4.5 The demister needs to be installed as a whole, and the limit deviation between the cathode and the anode is ±211. 4.6 The relative mean square of the airflow distribution is not more than 0.25, +7 under the conditions of meeting the design conditions, the electrostatic demister is put into operation for at least 000 hours. The information of the electric demisting case with charging body auxiliary equipment can be controlled by the ground according to the ground electric composition under the control of each system. 21, 5 test methods
Gradually the wind rate is carried out according to the center.
5.2 Demisting efficiency ratio of the Ministry of Industry and the Ministry of Construction acid production public closing regulations 5.3 The main body pressure drop, case distribution, fast safety characteristics test questions, read the anode question installation bias, room load boost test Jun Shangan (H/13931 I line
Maintenance packaging, transportation and storage
6.1 Packaging
61! The main body of the card processing is better to be the operating parts, the Buddha ring matching with the box first whole, the installation should ensure that the product does not change and change, and meet the delivery requirements. 1.2 Random documents should be scanned,
) Transfer order:
b) Product certificate:
Product brochure.
6.2. The parts and boxes should be pulled by the machine during transportation. .6.3.2 The parts should be fixed in the car to prevent the parts from falling during transportation. .3·Purchase release
.3 The equipment should not be installed, and the coal should be stored in a clean and tidy manner, and the temperature should be kept within 253 (within the scope of the opening of the two continents before the month.
6.32 The finished products should be placed between the processed materials. 6.3.3 The plastic tube (Antarctic tube) should be stored on a flat cement floor. The height of the equipment should not exceed 1.2. The distance from the heat source should be 2.6.3.4 After the equipment is assembled, it is strictly forbidden to open fire within 2m of the equipment.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.