HG/T 21575-1994 Illuminated sight glass HG/T21575-1994 standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
21575-94
Lighted Sight Glass
1994 - 11 -28
1995 -- 03 - 01
Ministry of Chemical Industry of the People's Republic of China
Industry Standard of the People's Republic of China
Lighted Sight Glass
HG/T 21575-94
Editing Unit:
Approving Department:
Implementation Date:
Shanghai Pharmaceutical Design Institute
Eighth Research Institute of Nuclear Industry
Shanghai Shuguang Lamp Factory
Ministry of Chemical Industry
March 1, 1995
Engineering Construction Standards Editing Center of Ministry of Chemical Industry
1995 Beijing
Ministry of Chemical Industry Document
Chemical Construction Development (1994) No. 810||tt| |Notice on the issuance of four chemical industry standards including "Mechanical Mixing Equipment"
To all provinces, autonomous regions, municipalities directly under the Central Government, cities with independent planning status, Construction Commissions (Construction Departments), Chemical Industry Departments (Bureaus, Companies), and relevant design units:
The four standards including "Mechanical Mixing Equipment", "Anti-Frost Liquid Level Meter", "Equipment Lifting Ears" and "Lighted Sight Glasses" formulated by the Ministry's Equipment Design Technology Center and organized by relevant design institutes have been approved as recommended chemical industry standards after review. The numbers are detailed in the attachment and will be implemented from March 1, 1995.
These standards are managed by the Ministry's Equipment Design Technology Center and published and issued by the Ministry's Engineering Construction Standards Editing Center. Appendix: Numbers of Four Chemical Industry Standards Ministry of Chemical Industry
November 28, 1994
Numbers of Four Chemical Industry Standards
Standard Name
Mechanical Mixing Equipment
Anti-Frost Liquid Level Gauge
Equipment Lifting Ear
Lighted Sight Glass
Standard Number
HG/T 20569-94
HG/T 21550-93
HG/T 21574-94
HG/T 21575-94
Subject content and scope of application
Cited standard
Basic parameters and dimensions of types
3.1Type A lighted sight glass
Type B lighted sight glass with flushing hole
Type C lighted sight glass with neck
Type D lighted sight glass with neck and flushing hole
Marking instructions
Marking example
Technical requirements
Sight glass lamp
Pressure test
Pressure test
Presentation instructions
Subject content and scope of application
This standard specifies the types, basic parameters, dimensions, technical conditions and usage regulations of lighted sight glasses.
This standard applies to various specifications and types of lighted sight glasses with nominal pressure not exceeding 1.0MPα, nominal diameter 100-150mm, medium leakage 0-200℃, and maximum sudden change temperature not exceeding 180℃.
GB/T1804
GB3836
GB/T 6580
GB/T 6581
GB/T6582
ZBK 04001
HGI 501-86-0
Reference standards
"General tolerance linear dimensions without tolerance" "Explosion-proof electrical equipment for explosive atmospheres" "Test method and classification of glass resistance to corrosion by boiling mixed alkali aqueous solution"
"Flame emission or atomic absorption spectrometry method for glass resistance to hydrochloric acid erosion at 100°C"
"Glass particle test method and classification for water resistance at 98°C"
"Environmental technical requirements for indoor and outdoor anti-corrosion electrical products" "Technical conditions for the manufacture and acceptance of tempered sight glass" 3 Types, basic parameters and dimensions
The lighted sight glass consists of a sight glass and a sight glass lamp. The types include lighted sight glass (type A), lighted sight glass with flushing hole (type B), lighted sight glass with neck (type C), and lighted sight glass with flushing hole (type D).
The sight glass body is made of carbon steel, a mixture of carbon steel and stainless steel, and all stainless steel. There are two types of sight glass lamps: anti-corrosion type and explosion-proof type. The anti-corrosion type sight glass lamp occupies half of the area of ​​the sight glass, and the other half can be used to peek into the container (see Figure 3a). The anti-corrosion type sight glass lamp is matched with the sight glass, and there are three types of DN100-150. The explosion-proof type sight glass lamp occupies most of the area of ​​the sight glass, and a non-lighted sight glass is installed to peek into the container (see Figure 36). The explosion-proof type sight glass lamp has only one specification of DN100, which is suitable for sight glasses of different specifications.
. Corrosion type
Explosion-proof type
3.1A type lighted sight glass (as shown in Figure 3.1)D
Figure 3.1A type lighted sight glass
The material of A type lighted sight glass shall comply with the provisions of Table 3.1.1. Detailed list of type A lighted sight glass
Sight glass glass
Pressure ring
See the dimension table for number of bolts
See the dimension table for cap nuts
Sight glass lamp
Tempered borosilicate glass
PTFE coated gasket
Q235-A
Q235-A
OCr19Nig
Q235-A
OCr19Ni9
OCr19Nig
Explosion-proof and corrosion-resistant halogen tungsten lamps
The outer side of the gasket can be used on the ladder
Rubber sheet
GB897-88
GB92 3-88
Explosion-proof type: BId
Corrosion-proof type: F2
3.1.2The dimensions of Type A lighted sight glass shall comply with the provisions of Table 3.1.2. Dimension table of Type A lighted sight glass
Nominal diameter Nominal pressure
18d150
Corrosion-proof type and explosion-proof type
1225190
Sight glass weight
Weight (kg)
Corrosion-proof type and explosion-proof type
12XM16
Type B lighted sight glass with flushing holes (as shown in Figure 3.2) Di
Figure 3.2 Type B lighted sight glass with flushing holes
The materials of Type B lighted sight glass with flushing holes shall comply with the provisions of Table 3.2.1. Detailed list of type B sight glass with light and flushing hole
Sight glass
Pressure ring
See dimension table for double-headed screw
See dimension table for cap nut
Sight glass lamp
Tempered borosilicate glass
PTFE cushion
Q235-A
.Q235-A
OCr19Ni9
Asbestos rubber sheet
OCr19Ni9
Q235-A
OCr19Ni9
OCr19Ni9
OCr19Ni9
·Explosion-proof and corrosion-resistant halogen tungsten lamp
3. 2. 1
． RemarkswwW.bzxz.Net
The two outer
gaskets can be
asbestos rubber sheet
GB897-88
GB923-88
explosion-proof type, BJd
corrosion-proof type F2
The dimensions of the B-type sight glass with light and flushing hole should comply with the provisions of Table 3.2.2. B-type sight glass with light and flushing hole dimension table
Nominal diameter Nominal pressure
1801501
Corrosion-proof type explosion-proof type
8×M12
Sight glass weight
12XM16
Table 3.2, 2
Weight (g)
Corrosion-proof type explosion-proof type
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.