This standard specifies the technical requirements, packaging, marking, storage, transportation and sampling of general-purpose lithium-based grease for automobiles. This standard applies to greases made by thickening mineral lubricating oil with fatty acid lithium soap and adding antioxidant and anti-rust additives. GB/T 5671-1995 General-purpose lithium-based grease for automobiles GB/T5671-1995 Standard download decompression password: www.bzxz.net

ICs 75. 100
National Standard of the People's Republic of China
GB/5671-1995
General purpose lithium base grease for automobile
Published on December 21, 1995
State Bureau of Technical Supervision
Implementation on August 1, 1996
National Standard of the People's Republic of China
General purpose lithium base grease for automobile
Ceneral parpase Hithtom base grease For antomobile
1 Main changes and scope of application
The automobile standard specifies the requirements for the receipt, packaging, maintenance, transportation and performance of lithium base grease for automobiles. CR/T 5671--1995
/ 587 ---5
This standard is suitable for the standard belt made of mineral lubricating oil with anti-rust and anti-rust additives. The products in accordance with this standard are suitable for the working temperature of 30~120℃, such as the wheel, axle, chassis, water and power generation parts of automobiles, and follow the principle of GB/T681.8. Its code is: LXCCHA2. 2 Reference standards: Lubricating grease and grease penetration standard GB: TASU
GRT5018
GB/T7325
CK/T 7326
Method for determination of lubricity full point
Method for determination of lubricity corrosion index
Method for determination of lubricity loss by evaporation loss of lubricating grease Copper strip corrosion test
GB/T7631. Classification of lubricants and related products [Class L> Part 8: Group X (standard greases STI/T(H48
SHI/T 610G
SH0164
Lubricating greases Viscosity measurement and control Salt resistance
Water resistance of greases Xie Xueshang
Standard product package transportation and delivery acceptance specifications for solid and semi-solid products Sampling and delivery of solid and semi-solid products
$H/70524
SIT OS
SH/T0526
SHT USS
SH/T336
Determination of steel mesh porosity of lubricating grease (static method)Qualitative quality method for oxidation of lubricating grease
Determination of slip loss of automobile wheel bearings
Determination of grease saturation and free acidity Determination of lubricating grease bar quality determination method (microscope method) Note: The international standard is not allowed to be determined by code, and the above-mentioned standards should be effective standards. 3 Technical requirements
The above standards are used as reference standards,
full points,
not waiting for the approval of the national control supervision from December 21, 1995 or the quality index
265-29
, trial method
GRT 269
GF/T4922
1996-0B-01 implementation
adhesion (20C,. +
bird forest.NH
etching (1.1h)
GB/T 5671---1995
quality standard
today+
not people in
technology greater than
long work system degree (Ian, European degree of life, %
not less
chemical trire9ot.t.7:M.
pressure J attached MPI
elimination of disease 2, knowledge
miscellaneous, individual
au jer t
12e r The packaging, labeling, purchase plan, copper sheet missing package, dark black change, this product is free of installation, marking, storage, transportation and delivery inspection shall be carried out according to SI0161. 5 sampling shall be carried out according to H0729, and 2.3k0 shall be taken as inspection and retention sample. 2
Wuhan Test Society:
SH/0324
SAT/T 0018
GB/T732G7.
G/77325
5[10326wwW.bzxz.Net
SH 015
SH/T32:
5/70336
Additional Notes
GB/T5671—1995
The standard is issued by China Petrochemical Corporation: This standard is under the technical jurisdiction of the Institute of Chemical Engineering. This standard was drafted by the Institute of Chemical Engineering, and the main drafter of this standard is Jin Shangyin. The standard is based on the Japanese Industrial Standard 1S2220—1993 Automobile Wheel Bearing Grease 1, M
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.