Some standard content:
Industry Standard of the People's Republic of China
QB2176, 2191-95
QB/T1177~2185-95
Bicycle Industry Standard
199512-05Promulgated
Promulgated by China Light Industry Federation
Implementation on 1996-07-01
Industry Standard of the People's Republic of China
Bicycle
Quick-release axle and rear axle
1 Subject content and scope of application
-111K/bN KAa
QB/r 2179-95
This standard specifies the product type, connection requirements, test and supervision methods, inspection rules, marking, packaging, transportation and storage of bicycle quick-release front and rear axles.
This standard applies to the bicycle front axle and rear axle specified in QB1714. 1 Reference standards
GB2828 Batch inspection set counting sample list for continuous batch inspection GB2825 Periodic inspection sample list (applicable to the inspection of the stability of the production process) GB122 Bicycle inspection equipment and appliances Technical parts B1217 Bicycle electric parts
QB/T1219 Bicycle surface oxidation treatment technical data QB1711 Bicycle name and model compilation method B/T1893 Bicycle front axle and rear axle Q1220 Bicycle Bicycle pattern and gauge
QB1221
Bicycle American pattern and gauge
3 Product type
3 Product structure and size
3.1.1 Quick front axle code, KQ) part name and type size, specifications see Figures 1 and 1 China Light Industry Federation 1093-12-05 approved
1-00 implementation
Specification code
2 Drawing:
6·- Drawing change (adjustment or combination):
10-pushing screen responsibility;
QB/T2179-95
7·Lato!
11-Blue-shaped frequency again
deep ring or frame:
dynamic spring
12-Pull support and set benefit
Each flower plate
pushing and helping effect
98 or:0:
106111
M1C× 1-6H/tig
D, 379·26-GTI/6g(G
11, 26.18The image holes on the two flower plates
are five wax
open half a hole 2
QB/T2179—95
fast mail (code KH)Part name type size small.Specifications see 2 and 3.3.1. 2
1 burn
2 a trip to sip +
6 a leap body (Mongolian body combination
10 degrees,
126±1
135±1
Daochuan Fanguo
5 Bi Feilun
6 Yue Feiling
6 Ji Feilun
7 Dragonfly Flywheel
7 Niu Feikuai
3-Chuangmu.
7 a pull rod.
a flight-shaped bomb tube
4 a ball or a ball rack:
8 FAW;
-HKAN KAn
6 a good batch
H a defensive
137 or
141 or
146 or
M35×1
.24 6gbzxz.net
13 A lever and a sleeve
M:0x1-
J.379·26
-RH/6g6e
Years of flowers on
The dead end
(The two non-flowering night bearing holes are also
starting from each other half a hole distance!
3.1.3 The size of the image hole can be found in National 3 and Table 3.
3.2 Product code
Q8/T±79-95
The product code consists of the integral code, the opening size and the factory design serial number. XXX
Example,
×××
Factory design sequence number
L size (n)
Opening size mnu)
Type (fast front shot)
T factory design sequence
-L size 8mn
Front axle opening size 100mn
Fast front axle
4 Technical requirements
4.1 Tightness mark
QT2179—95
X×XX×
YYKAoNr KA8
Factory design program library number
L dimension (mm)
C dimension (mm)
Opening dimension (aun)
Type code (quick release rear axle)
Factory design program number
1. Dimension 141 (mm)
CRss (run)
Rear axle opening dimension 1aG (mm)
Quick release rear axle
The marking of the quick-acting machine can clearly indicate whether the machine is in a loose or tight position. 4-2 The sensitivity of the front axle
Use standard measurement, the number of movements shall not be less than 120 times. 4.3 The sensitivity of the rear axle
Use standard measurement or measurement, the number of movements shall not be less than 100 times. 4.4 The screw size
The screw size of the rear axle body M155×1gB1.375246g and the pin shall comply with the specifications of QB1220, QB1221. 4.5 The runout of the axle body
The runout of the rear hook material after the body is installed shall not be greater than 0.3rm4.6 The wear resistance of the front material
The front and rear axles shall be tested on a special grinding and testing machine, and the bowl shall not have any depressions (ignoring the needle). 4.7 After the rear axle reinforcement test on the special pressure resistance test machine, the rear axle bearing and the raceway surface shall not have any shape loss (needle clearance is not counted). 4.8 Heat-treated parts, the shaft shall not break when the inner diameter is compressed and deformed by 1%. 4.9, the front and rear axle bodies are second-class plated parts. 4.9.1 The appearance quality of electrical parts shall comply with the provisions of 5.1.1 of QB/T1217. 4.9.1 The surface quality of electrical relays shall comply with the provisions of 5.2.1 of QB/1217. 42
QE/T1179—95
49.3 The thickness of the electroplated parts shall comply with the provisions of 5.3.1 of QB1217, and 49.4 The electroplated anti-corrosion capacity shall comply with the provisions of 5.4.1 of Q3/T1217. 4.10 Technical conditions for surface oxidation treatment
The front axle and rear axle are treated with oxidation treatment as Class I parts. 4.10.1 The appearance quality of parts treated with surface oxidation shall comply with the provisions of Article 3.2 of QB/T1219. 4.10.2 The corrosion resistance of parts treated with surface oxidation shall comply with the provisions of Article 3.3 of QB/T1219. 4.1I.3 The anti-corrosion performance of parts treated with surface oxidation shall comply with the provisions of Article 3.4 of QB/T1219. 4.11 Holding force of front and rear axles of quick release
Before and after quick release, apply forces of 505V and 170.V differentially along the direction of wheel removal for 30min. There should be no relative displacement between the front axle and front fork, rear axle and frame. 4.12 Strength of quick release mechanism
The quick release mechanism shall be able to withstand a locking force of 25% without continuous deformation. 4.13 Self-determination of the quick release mechanism When the front and rear supports are in the locked state, the force required to rotate the lever along the loose force interval shall not be less than 5N. 5 Test methods The testing equipment and instruments used in the test of this chapter shall comply with the provisions of G312742. 5.1 Check the tightness mark of the plate rod. 5.2 The front axle flexibility test shall be carried out in accordance with Article 5.1 of QB/T1883. 5.3 The rear axle flexibility test shall be carried out in accordance with Article 5.2 of QD/T1883. 5.4 The thread precision test shall be carried out in accordance with Article 5.3 of Q/T1883. 5.5 The rear axle body dynamic test shall be carried out in accordance with Article 5.4 of QB/T1883. 5.6 The front axle endurance test shall be carried out in accordance with Article 5.5 of QB/T1H3. The rear axle front grinding performance test shall be carried out in accordance with the provisions of Article 5.6 of QB/T1-83. 5.8 The scratch test of heat-treated parts shall be carried out in accordance with the provisions of Article 7 of Q3,188#. 5.9 The performance test of forged parts shall be carried out in accordance with the provisions of Article 5.8 of Qn/T1883. 5.10 The performance test of the oxidation-treated parts in the table shall be carried out in accordance with the provisions of Article 5.9 of QB/T1883. 5.11 Holding force test
Adjust the quick-release mechanism so that the quick release and the rear stop are correctly placed on the holding force test tool (called Xielu A). At 5mm from the end of the lever, add a force of 200N to the chain to eliminate the locking force. Apply a force of 500N and 178CN to the front and rear axles in the direction of wheel removal. Observe for displacement for 30s. See Figure 5 for examples. 5.12 Quick release mechanism test
Install the quick release front and rear axles on the test tool, apply a force of 250N at 5mm from the end of the lever, and observe the damage of the tension mechanism.
The quick release mechanism should be adjusted to prevent the mechanism from being completely locked under this force. 5.13 Quick release mechanism self-locking force test
According to 5.11, the lock is turned on, and a force of 5CN is applied at 5mm from the end of the lever in the loosening direction. The lever shall not rotate. 43
Inspection rules
QB/T2179—95
6.1 The production seat can be shipped after being inspected by the quality inspection department of the manufacturer and attached with the consultation. One set of front axle and rear axle.
6.2 Unit product
6.3 Delivery inspection
6.3.1 Delivery inspection
According to G8.
Work belt inspection secondary sample force plan,
6.3.2 Extraction plan
Batch quality is calculated based on the total number of unqualified products in each order, 6.3.3
Inspection items, inspection level (1L), unqualified classification, qualified quality level: AQ1.) and table 46.3.43
Technical standard provisions
Inspection items
Thread beat
Back-end step fear management medical momentum
Electric sealing quality
Surface oxidation management zero external quality
6. 4 Type inspection
6.4.1 Type control
According to GB2629.
Technical provisions
Test method
-HKAN KAn
Non-conforming
QB/T 2179—95
6.4.2 The test items are all the items specified in this standard. 6.4.3 The test period is three months.
6.4.4 Sampling plan
The sampling plan is changed.
6.4.5 The quality is calculated by the number of unqualified products per 100 units of product. 6.4. Test items, discrimination level (Dr.), unqualified classification, unqualified quality level (RQ,) sample size (m). See Table 5 for the discrimination group.
Inspection items
Getze mark
New shaft joint
Rear single degree
Fire condition
On-box treatment hall
Electric missing parts surface roughness seat
Electric sensitive parts chain layer thickness seat
Electric key parts anti-corrosion ability
Agricultural oxidation treated plastic parts
Surface oxidation treated parts
High-performance
Central holding force
Quick mechanical strength
Quick mechanical strength
Electrical components visual quality
Surface oxidation treatment components
External modification 5 room
Text of this standard
Technical requirements
Test method
Unqualified
: Splice
Special determination group
Ar-1 Rt-2
A-2 K-5
A,=5 R.=7
R:—?
A,=0R,=2
A,=GR,=2
A=IR,=2
Regarding marking, packaging, transportation, purchase and storage
7.1 Labeling
7.1.1 Product marking
Qn/T2179—95
The product should have the factory trademark mark, which can also be agreed upon according to the user's requirements. 7.1.2 Packaging mark
Outer surface of the product packaging box The following signs should be present:
8. Manufacturer name:
b. Product name:
C. Trademark name
d. Product model or mark:
e. Ex-factory date:
F. Quantity:
Net weight:
h, body dimensions (length × height>
5. Standard code, number, name (can be marked on the product manual): "Caution, light effect, "wet".
7.1 Packaging| |tt||HKAoNKAe
了.2.1 Before packing, the front and rear axles of quick-discharging vehicles should be cleaned and coated with industrial neutral anti-rust oil + etc. The front and rear axles of quick-discharging vehicles should be packed in plastic bags or anti-drip bags, and then packed according to the specified number of letters or the name of this package. The soft inflatable cushioning materials in the box should be arranged neatly in the box, and the air should not be generated. The packaging should be reported to the supply and demand department without penetration. 1.3 Transportation hoop
The packaging and transportation efficiency of the front and rear axles of quick-discharging vehicles should be It should be carefully placed in a strong place. It should not be placed on the ground. It should not be packed with corrosive and flammable items. It should not be exposed to rain, snow or moisture during transportation. 7.4 Storage 4.1 The packaging with quick-release should be placed under the ground, away from the wind, and should not be placed with active chemicals or volatile substances. The box should be firmly placed and not more than 30m from the ground. 7.4.2 The product should not rust within 3 months from the factory under normal transportation and storage conditions. 46 -
Construction requirements
QB/217995
Appendix A
Clamping force inspection tool
(Supplement)
1. The coaxial width error of the two presses is not more than 0.10mm, 2.36mm long, internal heat treatment temperature HRC4245. Attached explanation,
This standard is issued by the Quality Standard Department of China Light Industry Association, and this standard is under the jurisdiction of the National White Vehicle Standard North Center. This standard is the responsibility of Mizhou City Vehicle Standard
This standard is promoted by: Zhang Yueping, Sun Luozheng, Qin Huiqin, Zhang Feng, -fu.sSee Table 5 for the determination array.
Inspection items
Getze mark
New shaft joint
Rear single degree
Fire condition
On-box treatment hall
Electrical missing parts surface roughness seat
Electrical sensitive parts chain layer thickness seat
Electrical key parts anti-corrosion ability
Agricultural oxidation treatment plastic parts
Surface oxidation treatment parts
High-performance
Central holding force
Quick mechanical strength
Quick mechanical strength
Electrical components visual quality
Surface oxidation treatment components
External modification 5 room
Text of this standard
Technical requirements
Test method
Unqualified
: Splice
Special determination group
Ar-1 Rt-2
A-2 K-5
A,=5 R.=7
R:—?
A,=0R,=2
A,=GR,=2
A=IR,=2
Regarding marking, packaging, transportation, purchase and storage
7.1 Labeling
7.1.1 Product marking
Qn/T2179—95
The product should have the factory trademark mark, which can also be agreed upon according to the user's requirements. 7.1.2 Packaging mark
Outer surface of the product packaging box The following signs should be present:
8. Manufacturer name:
b. Product name:
C. Trademark name
d. Product model or mark:
e. Ex-factory date:
F. Quantity:
Net weight:
h, body dimensions (length × height>
5. Standard code, number, name (can be marked on the product manual): "Caution, light effect, "wet".
7.1 Packaging| |tt||HKAoNKAe
了.2.1 Before packing, the front and rear axles of quick-discharging vehicles should be cleaned and coated with industrial neutral anti-rust oil + etc. The front and rear axles of quick-discharging vehicles should be packed in plastic bags or anti-drip bags, and then packed according to the specified number of letters or the name of this package. The soft inflatable cushioning materials in the box should be arranged neatly in the box, and the air should not be generated. The packaging should be reported to the supply and demand department without penetration. 1.3 Transportation hoop
The packaging and transportation efficiency of the front and rear axles of quick-discharging vehicles should be It should be carefully placed in a strong place. It should not be placed on the ground. It should not be packed with corrosive and flammable items. It should not be exposed to rain, snow or moisture during transportation. 7.4 Storage 4.1 The packaging with quick-release should be placed under the ground, with the outside protected from the wind. It is not allowed to be placed together with active chemicals or activating substances. The box should be firmly erected and no more than 30m from the ground. 7.4.2 The product should not rust within 3 months from the factory under normal transportation and storage conditions. 46 -
Construction requirements
QB/217995
Appendix A
Clamping force inspection tool
(Supplement)
1. The coaxial width error of the two presses is not more than 0.10mm, 2.36mm long, internal heat treatment temperature HRC4245. Attached explanation,
This standard is issued by the Quality Standard Department of China Light Industry Association, and this standard is under the jurisdiction of the National White Vehicle Standard North Center. This standard is the responsibility of Mizhou City Vehicle Standard
This standard is promoted by: Zhang Yueping, Sun Luozheng, Qin Huiqin, Zhang Feng, -fu.sSee Table 5 for the determination array.
Inspection items
Getze mark
New shaft joint
Rear single degree
Fire condition
On-box treatment hall
Electrical missing parts surface roughness seat
Electrical sensitive parts chain layer thickness seat
Electrical key parts anti-corrosion ability
Agricultural oxidation treatment plastic parts
Surface oxidation treatment parts
High-performance
Central holding force
Quick mechanical strength
Quick mechanical strength
Electrical components visual quality
Surface oxidation treatment components
External modification 5 room
Text of this standard
Technical requirements
Test method
Unqualified
: Splice
Special determination group
Ar-1 Rt-2
A-2 K-5
A,=5 R.=7
R:—?
A,=0R,=2
A,=GR,=2
A=IR,=2
Regarding marking, packaging, transportation, purchase and storage
7.1 Labeling
7.1.1 Product marking
Qn/T2179—95
The product should have the factory trademark mark, which can also be agreed upon according to the user's requirements. 7.1.2 Packaging mark
Outer surface of the product packaging box The following signs should be present:
8. Manufacturer name:
b. Product name:
C. Trademark name
d. Product model or mark:
e. Ex-factory date:
F. Quantity:
Net weight:
h, body dimensions (length × height>
5. Standard code, number, name (can be marked on the product manual): "Caution, light effect, "wet".
7.1 Packaging| |tt||HKAoNKAe
了.2.1 Before packing, the front and rear axles of quick-discharging vehicles should be cleaned and coated with industrial neutral anti-rust oil + etc. The front and rear axles of quick-discharging vehicles should be packed in plastic bags or anti-drip bags, and then packed according to the specified number of letters or the name of this package. The soft inflatable cushioning materials in the box should be arranged neatly in the box, and the air should not be generated. The packaging should be reported to the supply and demand department without penetration. 1.3 Transportation hoop
The packaging and transportation efficiency of the front and rear axles of quick-discharging vehicles should be It should be carefully placed in a strong place. It should not be placed on the ground. It should not be packed with corrosive and flammable items. It should not be exposed to rain, snow or moisture during transportation. 7.4 Storage 4.1 The packaging with quick-release should be placed under the ground, away from the wind, and should not be placed with active chemicals or volatile substances. The box should be firmly placed and not more than 30m from the ground. 7.4.2 The product should not rust within 3 months from the factory under normal transportation and storage conditions. 46 -
Construction requirements
QB/217995
Appendix A
Clamping force inspection tool
(Supplement)
1. The coaxial width error of the two presses is not more than 0.10mm, 2.36mm long, internal heat treatment temperature HRC4245. Attached explanation,
This standard is issued by the Quality Standard Department of China Light Industry Association, and this standard is under the jurisdiction of the National White Vehicle Standard North Center. This standard is the responsibility of Mizhou City Vehicle Standard
This standard is promoted by: Zhang Yueping, Sun Luozheng, Qin Huiqin, Zhang Feng, -fu.s
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.