GB 3894.7-1983 Graphical symbols for ship layout drawings - Mooring equipment
Basic Information
Standard ID:
GB 3894.7-1983
Standard Name: Graphical symbols for ship layout drawings - Mooring equipment
Chinese Name:
船舶布置图图形符号 系泊设备
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-10-28
Date of Implementation:1984-05-01
Date of Expiration:2009-02-01
standard classification number
Standard ICS number:Shipbuilding and offshore structures >> 47.020 Ships and offshore structures, general
Standard Classification Number:Ship>>Ship General>>U04 Basic Standard and Common Method
Publication information
publishing house:China Standards Press
Publication date:1984-05-01
other information
Release date:1983-10-28
Review date:2004-10-14
drafter:Zhu Quanxin
Drafting unit:Shipbuilding Corporation No. 708
Focal point unit:National Technical Committee for Standardization of Marine Vessels
Proposing unit:China State Shipbuilding Corporation
Publishing department:China State Shipbuilding Corporation
competent authority:China State Shipbuilding Corporation
Introduction to standards:
This standard specifies the graphic symbols for mooring equipment in the general arrangement drawings of ships. GB 3894.7-1983 Graphic symbols for mooring equipment in ship arrangement drawings GB3894.7-1983 Standard download decompression password: www.bzxz.net
Some standard content:
UDC 008.62/-$3:829.12.016
National Standard of the People's Republic of China
GB3894.7—83
Graphical symbols on the arrangement plans of ships
Mooring equipment
Figuratlons and symbols on the arrangement plans of ships
-Mooring equlpment
Issued on October 28, 1988
National Standard
Implementation on May 1, 1984
National Standard of the People's Republic of China
Graphical symbols on the arrangement plans of ships
Mooring equipment
Figurations and symbols on the arrangement plans of ships -Mooring equlpment
This standard is compiled with reference to Part 1 of ISO 1964-1975, but does not include deck machinery. This standard specifies the graphic symbols for mooring equipment in the general arrangement drawings of ships. UDC 003.62
.12.016
GB 3894.7—83
The graphic symbols in this standard are drawn at a ratio of approximately 1:100. If the layout drawings are drawn at other ratios, the graphic symbols shall be enlarged or reduced in proportion to the physical size of the equipment. This standard specifies basic graphic symbols, which may be used in combination with other graphic symbols. Various special equipment not mentioned in this standard may be represented by graphic symbols similar to their actual shapes, but this shall be indicated on the drawings. No.
Double boflard
Double boflard
Cruciform bollardbZxz.net
Double staghorn bolliard
Fairlead
Fairlead eye
Mroring pipe
Closed fairlead ineluding panama chockIndependent vertical roller
Freestanding vertical rollerPublished by National Bureau of Standards on October 28, 1983
Top view
Side view
Implemented on June 1, 1984
Single roller guide
Fairlead with roller
Fairlesd with rollers
Mooring cleat
Muoring eleat
Roller head fairlead wilh cleat
Rope reel
Rope winch hand operated
Hangerwinch or spanwinch
Winch controller
Winch conlroller
Nine rollers fairlead
Hand operated
Boat winch
Multi-reading wheel cable guide
Fairlead with rollers
Power operated
Top view
Note: The anchor winch and winch symbols given in Item 7.14 of 1S01864-1975 and the examples of the joint contract are not listed in this standard. 1501964—1975:1 No such special number
Additional instructions,
This standard is proposed by China State Shipbuilding Corporation. GB 3884.7—83
This standard is under the jurisdiction of the Basic Standards Subcommittee. This standard is drafted by China Ship and Ocean Engineering Design and Research Institute. The main drafter of this standard is unknown.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.