GB/T 9065.2-1988 Hydraulic hose connector connection dimensions ferrule type
Basic Information
Standard ID:
GB/T 9065.2-1988
Standard Name: Hydraulic hose connector connection dimensions ferrule type
Chinese Name:
液压软管接头 连接尺寸 卡套式
Standard category:National Standard (GB)
state:in force
Date of Release1988-04-18
Date of Implementation:1989-01-01
standard classification number
Standard ICS number:23.100.30
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
associated standards
Publication information
other information
Release date:1988-04-18
Review date:2004-10-14
Drafting unit:Tianjin Engineering Machinery Research Institute
Focal point unit:National Hydraulic and Pneumatic Standardization Technical Committee
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 9065.2-1988 Hydraulic hose connector connection dimensions ferrule type GB/T9065.2-1988 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Hydraulic power-Hose connector:Connecting dimension
(Part : Insert type)
UDC 621. 643. 4
GB9065.2—88wwW.bzxz.Net
This standard specifies the connection dimension of the ferrule type hose connector for hydraulic systems with hydraulic oil (liquid) as the working medium. 1 Reference Standards
GB3683 Steel Wire Braided Hydraulic Hose
GB3733.1~3765 Ferrule Type Pipe Connector
2 Type and Dimension
2.1 The connector type is shown in Figure 1.
GB3733.1~3765
2.2 The connection dimensions are specified in the following table.
Approved by the National Machinery Industry Commission on April 5, 1988, and implemented on January 1, 1989
GB 9065.2—88
Cut-type pipe joints
Limit deviation
Nominal size
d (reference)
Hose inner diameter
Additional instructions:
This standard is proposed and managed by the National Hydraulic and Pneumatic Standardization Technical Committee. This standard was drafted by the Tianjin Engineering Machinery Research Institute of the National Machinery Industry Commission and the Huzhou Hydraulic Accessories Factory.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.