other information
drafter:Liao Yicheng, Zhang Kun, Li Cuiying
Drafting unit:National Mineral Salt Standardization Center
Focal point unit:National Mineral Salt Standardization Center
Proposing unit:China Light Industry Press
Publishing department:National Development and Reform Commission of the People's Republic of China
competent authority:National Development and Reform Commission of the People's Republic of China
Some standard content:
ICS 67.220.20
Classification number: X38
Alternative number: 18425-2005
Light Industry Standard of the People's Republic of China
QB/T 2744.2—2005
Bath salt-Part 2: Bath salt
Bath salt-Part 2: Bath sale
Published on 2005-07-26
National Development and Reform Commission of the People's Republic of China Implemented on 2006-01-01
QB/2744 is divided into two parts:
Part 1: Bath salt:
Part 2: Bath salt
This part is Part 2 of QT2744.
Introduction to this part: China Light Industry Association National Center for Standardization
The main body of this section: National Center for Standardization. The main authors of this part: Yan Yicheng, Zhang Min, Li Ju. The main body of this part is issued by this part.
QB/T 2744.2:2005
Bath salt Part 2: Bath salt
QB/T 2744.22005
This part specifies the requirements, test methods, inspection plan and marking, packaging, transportation and storage of bath salt. This part is applicable to a series of products that are processed with salt as the raw material and a certain amount of recycled materials and clean additives: 2 Normative references
The following provisions are incorporated into this part through the reference of this part. For dated references, all subsequent revisions (excluding those resulting from manufacturing errors) or revisions to this part are not applicable. However, the customer is encouraged to discuss whether to use the latest versions of these documents based on the referenced documents. For unequally dated references, the latest versions apply to this part. GB/T191 Packaging, storage and transportation diagrams GBT7917.2 Standard test methods for cosmetic hygiene chemicals Determination of sample ions B/T7917.3 Standard test methods for cosmetic hygiene chemicals Determination of sample ions B/T182001 Salt industry main products B/T113025.3-1991 Salt industry test method for water content GB/T 1302S.S-[99]
Test method for salt industry: Determination of water content GB/T: 3.531.12000 General test method for cosmetics pH value 3 Requirements
3.1 Sensory index
Color: Approximately.
Aroma: No odor, in line with the product's current aroma, 3.2 Physical and chemical indexes
Should meet the requirements of clothing 1.
Total (in terms of /% (quality and price)
Taifen (including finished water conservancy products) (division of teaching) basis standard
4Sampling
multiply/(nng/ke)
/tmg/k
:tmy/kg>
According to the number of samples specified in 3.4.5 of GB/18013-2001, filter and use the quartering method to reduce the required amount of space, 1
4B/T: 2/44.2-2905
5 Test method
Except for the small statement, the reagents in the separation must be semi-pure water or water of appropriate purity. 5.1 Sensory index
The following are the results:
5.2 Ammonia
Allow GB/13025.5-199! +2 determination.
: When the object is measured in the room, the sample is placed in the sample room, and the humidity of the sample is measured at the same time. The sample is taken out and treated. The amount of energy is diluted to about 25.511112.
b.3 Water (including crystal water and volatile matter)
Table GB:T 12025.3-1991 Small 2 Specimen: 3.0, water in the cooling layer: 00, measure 56 mercury according to GB/T13531.1-2000 6.1.4. 5.5.1 Principle: Sample location: record the content of the substance that can produce a color in the solution, carbon tetraoxide, compare with the upper mark. 5.5.2 Reagents: 5. 5.2. 1 Transfer tape: 1+1.wwW.bzxz.Net
5.5.2.2 Aqueous solution: 1+1
5.5.2.3 Pure solution: 1+00
5.2.4 Concentrated solution: 111
557.5 Slurry: 1+9
5.5.2.6 Microdispersant: 1+35
5.5.2 Commercial acid solution: cKMu0)=心.1mal/[,55.2.B Immune system solution: 200g/L:
5.5.2.9 Standard isocyanate: 9/.5.5.2.10 Magnetic solution: 1.0, guaranteed to be effective. Weigh the bottom fine agent - just trace 0.58: soluble in small chlorinated said 50m!:: Juren 25m1. Divide the liquid into a full one, the water is relatively liquid (1+901 pills all the way, every change. Request to bring this into the equipment micro year: spot wear liquid (,) adjust to the ball meter, Yanshan's two flavors urgent installation I one: needle method 20, 200, 100rL, combined horse chlorinated rumor: eat Ding target material with out: recent sentence 5.5.21 disulfide gland use rate
absorb a joint liquid 1.mL: add four need to be chemically realized to 1C.0mL, source points, 11em ratio single stop, with four activated carbon to the quarter point, the test length 49ru measurement is the absorption need, according to formula 1) tube horse, rr: system trace use wave (70% through time ratio) the crown carbon actual liquid liters
V-.10 (2-220) -1.35
5.5.2.12 Multi-science gradual liquid: 1.limml
accurate building light lift 1 considered through the most model 13,, system degree 1-35) to make its drop rate piece, into 1Ml. capacity: and said to choose jade system good, Hanbo library rises village current record 1.0 compensation 55.2.:3 Jie accurate to make Sichuan liquid: 1.0 account / mL
QB/T2724.22005
2 system drop liquid 1.0m ten 100. customer intention, add sulfur brand <1135 release full degree, this according to the stimulation every! Take 5.m of this liquid at a rate of 50m, add acid (1135% by mass), this extract contains about 10% by mass. 5.5.3 Collector 5.5.3.1: * Experimental apparatus 5.5.3 2 Special temperature furnace: set 600_20: 5.5.3.3 Spectrophotometry 5.5.4 Analytical step 5.5.4 1 Report - type 5.00 ± 0m competition theft 1, raise the heat on the seven furnaces to make the reduction fully carbonized to light smoke, then the sample is lowered (6 00+20) heart burn until completely dissolved, cool to 100ml. volume, hope dust to the surface, through the total, the government rate liquid 50.mL125m points technical tour: column E dense wave and try to imagine the empty room wave in the bright station sensitive time secret report pregnancy rate case number: naturally can add light ampoule purple extraction, rate fragrance core-ethanol finger liquid 2 grams full, general acid 1 adjust to orange color): make red grant 2).
55.4.2 liquid section adopts standard low monthly rate liquid (1.0μg/mL>2.5lml. in 125mL points, sulfuric acid (1119:10mL: then add some 40mE.. Temperature about. Main effect disk according to hydroxylamine dissolution 1l, change volume 20mir: non-acute time control: 5.4.3 in single rate range, reagent * white liquid and loss standard travel wave each as two basis Chen he used no 5. Heart mL, brush vibrate 2min, struggle to place the star, after degreasing often four chemical equipment into the [can be included in the forest, with chlorination into zero point, at 40 source absorbance ton 55.5 results expressed
measured rotten horse dissolution wave and lower than or calculated pump standard deep laser and light as the containing level, the dry as a level. 56
According to GB/T7917.2.||t t||B Inspection classification
6, 1 Inspection classification
6.1.1 Type inspection
Type inspection includes the items in this section, and the following are common production processes, not less than one time. The market is also separated from the design type.
a: Prohibited raw materials, processes, currency changes may affect the performance of the product: b) The product is used for a long time to restore the safety of the product:
c Factory inspection and modification of the type inspection method: The state frequently raises the requirements for the six types of inspections.2 Factory inspection
, the monitoring items are as follows: the total amount of radiation, the amount of moisture, and the number of products delivered at the same time are the same as the original production specifications. The batch of products shall be inspected by the inspection agency; or the inspection agency shall conduct inspections with the provisions of this part. Only qualified products can be shipped out! The number of the vehicle will be approved.
3 Jin inspection results must be carried out. If the inspection results do not conform to the provisions of this part, the spare samples of the same batch of products must be taken one by one. The samples shall be inspected according to the pre-arrangement without exceeding the provisions. If the inspection reaches 1 of this part, the batch of products shall be judged as non-conforming. The quality of the products shall be inspected at the time of delivery. When the quality of the products is verified, the supply and demand efficiency can be verified. The inspection and planning of this part shall be carried out. QB/2744.2-2005
7 Marking, packaging, transportation, purchase
7.1 Marking, packaging
Product packaging materials must be hygienic, and the product packaging must be marked with: product name, ingredients, net content, factory name, factory address, production period, temperature code, hygiene label, shelf life, product destination, usage instructions, precautions and other signs. The outer packaging storage and transportation drawings must also comply with GR/T191 regulations.
Transportation tools should be dry, disinfected, and odorless. There should be no rain, water, or pollution-free equipment. Small items should be transported together with harmful, flammable, and easily combustible items.
7.3 Storage
Products should be stored in batches in a ventilated, dry place and should not be stored together with goods that may be contaminated by energy.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.