Some standard content:
GB 18382--2001
This standard is mandatory in its entirety.
This standard is not equivalent to ISO7409:1984.
Compared with ISO7409:1984, this standard adds relevant term definitions, and at the same time, according to relevant national laws, regulations and rules, adds corresponding labeling content requirements.
From January 1, 2002, the fertilizer labels on the sales packages of fertilizers produced by fertilizer production enterprises shall comply with this standard; from July 1, 2002, the sale of fertilizers whose fertilizer labels do not comply with this standard shall be stopped on the market. This standard is proposed by the State Administration of Petroleum and Chemical Industry. This standard is under the jurisdiction of the National Technical Committee for Standardization of Fertilizers and Soil Conditioners and is responsible for interpretation. The drafting unit of this standard: National Fertilizer Quality Supervision and Inspection Center (Shanghai). The main drafters of this standard: Liu Gang, Zhang Xiaoqin, Yang - This standard is published for the first time.
GB18382-2001
ISO Foreword
ISO (International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The formulation of international standards is usually carried out through ISO's technical committees. Each member body interested in a project for which a technical committee has been established has the opportunity to participate in the technical committee, and governmental or non-governmental international organizations associated with ISO may also participate in this work. The draft international standard adopted by the technical committee shall be sent to the member bodies for approval before being approved as an international standard by the ISO Council.
ISO 7409 International Standard was formulated by ISO/TC134 Technical Committee on Fertilizers and Soil Conditioners and was sent to member units in 1981.
This standard has been adopted by member units of the following countries: Austria
Czechoslovakia
Hungary
Iraq
Israel
Italy
Kenya
Mexico
Romania
Sri Lanka
Portugal
1 Scope
National Standard of the People's Republic of China
Contents and requirements
Fertilizer marking
Fertilizer marking--Presentation and declaration This standard specifies the basic principles, general requirements and content of fertilizer marking. This standard applies to fertilizers produced and sold within the territory of the People's Republic of China. 2 Reference standards
GB18382--2001
neq ISO 7409: 1984
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. The parties using this standard should explore the possibility of using the latest versions of the following standards. GB190-1990 Dangerous Goods Packaging Marking
G13191--2000 Pictorial Marking of Packaging Storage and Transportation G13/14436 1993 General Rules for Industrial Product Guarantee Documents 3 Definitions
This standard adopts the following definitions:
3.1 Marking
A general term for various indications used to identify fertilizer products and their quality, quantity, characteristics and methods of use. The marking can be expressed in words, symbols, patterns and other explanatory materials. 3.2 Label
The printed part of a paper, plastic sheet or packaging bag or other container with necessary information for identifying the fertilizer and understanding its main properties. 3.3 Packaged fertilizer packed fertilizer Fertilizer pre-packed in a container ready for delivery to customers. 3.4 Container
A sealed container (such as a bag, bottle, tank, barrel) that is in direct contact with the fertilizer and can be transported or stored in unit quantities. Note: In some countries, fertilizer products with oversized packaging are called bulk. 3.5 Fertilizer
Material whose main function is to provide plant nutrients. 3.6 Slow-release fertilizer Fertilizer in which nutrients are in a compound or physical state that can be slowly released over a period of time for continuous absorption and utilization by plants. 3.7 Coated fertilizer Fertilizer made by coating the surface of its particles with a thin layer of other substances to improve the efficacy and (or) performance of the fertilizer. 3.8 Compound fertilizer: Fertilizer made by chemical method and/or blending method with at least two nutrients of nitrogen, phosphorus and potassium in specified amount. 3.9 Compound fertilizer: Fertilizer made by chemical method only with at least two nutrients of nitrogen, phosphorus and potassium in specified amount. It is a kind of compound fertilizer, approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on July 26, 2001, 392
2002-0101 implementation
GB 183822001
3.10 Organic-inorganic compound fertilizer: Compound fertilizer containing a certain amount of organic matter. 3.11 Straight fertilizer fertilizer nitrogen, phosphorus, potassium, etc. A general term for nitrogen fertilizer, phosphorus fertilizer or potash fertilizer with a specified amount of a nutrient 3.12 primarynutrient; naicronutrient A general term for the elements nitrogen, phosphorus, potassium.
3.13 secondaryelement; nuirient A general term for the elements calcium, magnesium, sulfur, etc.
3.14 traceelementmicronutricnt An element that is necessary for plant growth and is relatively small in quantity, such as boron, manganese, iron, zinc, copper, molybdenum or cobalt, etc. 3.15 fertilizer grade The nutrient content of fertilizer expressed in percentage. 3.16 formula
In the order of NP. ()-K () (total nitrogen-effective phosphorus pentoxide-potassium oxide), Arabic numerals are used to indicate the percentage of each in the compound fertilizer.
Note: "0\ indicates that the element is not contained in the fertilizer. 3.17 Declarableconient
The content of the element (or oxide) indicated on the label or quality certificate of the fertilizer or soil conditioner. 3.18 Total primary nutrient total primary nutrient The sum of total nitrogen, available phosphorus pentoxide and potassium oxide, expressed as a percentage by mass. 4 Principle
Specify the main contents of the label and determine the size, position, text, graphics, etc. of the label on the fertilizer packaging container so that users can identify the fertilizer and determine its characteristics. These regulations vary depending on the container used: for fertilizers greater than 25kg (or 25L), or for fertilizers between 5 and 25kg (or 5 and 25I), or for fertilizers less than 5kg (or 5L).
5 Basic principles
5.1 All contents marked on the label must comply with national 5.2 All the information marked on the label must be accurate, scientific and easy to understand. 5.3 All the information marked on the label must not describe or introduce the fertilizer in an erroneous, misleading or deceptive way. 5.4 All the information marked on the label must not cause users to confuse the fertilizer or a certain property of the fertilizer with the fertilizer product by using direct or indirect suggestive language, graphics or symbols.
General requirements
All the information marked on the label should be clearly and durably printed on a uniform and contrasting substrate. 6.1 Text
The text in the label should use standard Chinese characters. Minority languages, Chinese Pinyin and foreign languages (nutrient names can be expressed in chemical element symbols or fractional expressions) can be used at the same time. Chinese Pinyin and foreign fonts should be smaller than the corresponding Chinese characters and minority languages. Legal units should be used.
6.2 Graphics
Should comply with the provisions of GB190 and GB191.
6.3 Color
GB 18382 --- 2001
The colors used should be eye-catching, prominent, easy for users to pay special attention and can be quickly identified. 6.4 Durability and availability
Directly printed on the package, the durability should be guaranteed within the expected life of the product and remain clearly visible. 6.5 The form of the label
It is divided into outer packaging label, certificate of conformity, quality certificate, instruction manual and label, etc. 7 Label content
7.1 Fertilizer name and trademark
7.1.1 The names of fertilizers that have been specified by national standards and industry standards should be indicated. For product names or names of fertilizers for special purposes, they can be marked with a small number 1 under the product name (see 10.1.3). 7.1.2 If the national standards and industry standards do not specify the product name, a common name that will not cause misunderstanding and confusion among users and consumers should be used.
7.1.3 It is not allowed to add untrue or exaggerated words to the product name, such as "high-efficiency ×××", "×× fertilizer king", "full element ×× fertilizer", etc.
7.1.4 Enterprises can mark registered trademarks. 7.2 Fertilizer specifications, grades and net content
7.2.1 If the specifications, grades and categories are specified in the fertilizer product standards, the corresponding specifications, grades and categories should be indicated. If only the nutrient content is indicated, it is deemed that the full technical indicators of the product quality meet the product grade requirements corresponding to the nutrient content. 7.2.2 The net content of the fertilizer product should be indicated on the single package. The labeling of net content shall comply with the requirements of the "Regulations on Metrology Supervision of Quantitatively Packaged Commodities". 7.3 Nutrient content
The nutrient content shall be indicated with a single-value.
7.3.1 Single fertilizer
7.3.1.1 The percentage content of a single nutrient shall be indicated. 7.3.1.2 If medium elements and trace elements are added, medium elements and trace elements (calculated as single elements, the same below) may be indicated. The content of each single nutrient and the corresponding total content shall be indicated separately according to the two types of medium elements and trace elements. The content of medium elements and trace elements shall not be added to the main nutrients. Trace element content less than 0.02% or (and) medium element content less than 2% shall not be indicated. 7.3.2 Compound fertilizers (compound fertilizers)
7.3.2.1 The percentage content of total nutrients N, P.0, K,0 should be indicated. The total nutrient value should not be lower than the sum of the single nutrient values in the formula. Other elements or compounds should not be included in the total nutrients. 7.3.2.2 The percentage content of total nitrogen, effective phosphorus pentoxide, and potassium oxide should be indicated in the formula, such as nitrogen, phosphorus, and potassium compound fertilizer 15-1515. . Binary fertilizers should be marked with "0" in the position without single nutrients, such as nitrogen-potassium compound fertilizer 15-0-10. 7.3.2.3 If medium elements and trace elements are added, they shall not be marked on the packaging container and quality certificate (except as required by national standards or industry standards).
7.3.3 Medium element fertilizers
7.3.3.1 The nutrient content of each medium element and the sum of the nutrient content of the medium elements shall be separately indicated. Single medium elements with a content of less than 2% shall not be indicated.
7.3.3.2 If trace elements are added, they may be indicated. The content of each trace element and the total content shall be separately indicated. The content of trace elements shall not be added to that of medium elements. Other requirements are the same as 7.3.1.2. 394
7.3.4 Trace element fertilizers
GB 18382—-2001
The single content of various trace elements and the sum of the trace element nutrient content should be marked separately. 7.3.5 Other fertilizers
Refer to 7.3.1 and 7.3.2 for implementation.
7.4 Content of other additives
7.4.1 If other additives are added, other additives can be marked. The content and total content of each additive should be marked separately. The content of additives and the main nutrients shall not be added together.
7.4.2 Substances or elements that need to be restricted and marked according to product standards should be marked separately. 7.51: Production license number
For products that are subject to production license management by the state, the production license number should be indicated. 7.6 The name and address of the producer or distributor shall be indicated as registered in accordance with the law The name and address of the manufacturer or distributor who is registered and can assume the responsibility for product quality. 7.7 Production date or batch number
The production date or batch number of the fertilizer product should be indicated on the product certificate, quality certificate or product outer packaging. 7.8 Fertilizer standard
7.8.1 The standard number of the fertilizer product should be indicated. 7.8.2 For fertilizer products with national or industry standards, if other elements or additives not specified in the standard are indicated, enterprise standards should be formulated. The enterprise standards should include the analysis methods of the added elements or additives, and the national standards (or industry standards) and enterprise standards should be indicated at the same time. 7.9 Warning instructions
Warning instructions should be provided if improper transportation, storage and use may cause property damage or endanger human health and safety. 7. 10 Others
7.10.1 If there are other requirements in laws, regulations and rules, they shall be in accordance with such provisions. 7.10.2 Other labels that the manufacturer deems necessary and that comply with the requirements of national laws and regulations. 8 Labels
8.1 Adhesive labels and other corresponding labels
If the size and shape of the container allow, the minimum label area of the label shall be 120mm×70mm, and the minimum text height shall be at least 3mml. The rest shall comply with the provisions of Chapter 10 of this standard. 8.2 Hanging labels
The minimum label area of the hanging label shall be 120mm×70mm, and the minimum text height shall be at least 3mm. The rest shall comply with the provisions of Chapter 10 of this standard.
9 Quality certificates or certificates of conformity
It shall comply with the provisions of GB/T14436.
10 Label printing
10.1 Containers for fertilizers larger than 25kg (or 25L) 10.1.1 Label area location and area
… A short-shaped area, the total area of which is at least 40% of the selected surface, which should be one of the main surfaces of the container, and the label content should be printed in this area. The sides of the area should be parallel to the sides of the container. All labels in the area should be printed in the order of Chinese characters in the horizontal direction, and the label content should not be printed vertically or obliquely. 10.1.2 Main item label size
Based on the area of the printed label area (10.1.1), three label sizes should be used so that the label content can be clearly arranged. These sizes should be in X/Y/Z ratio, which can be changed within the range shown in Table 1. The height of the smallest font should be at least 10mm. Table 1 Ratio of three types of logo sizes
Minimum font size
10.1.3 Minimum ratio of sizes of main items and text in the logo area
Size ratio
Small (X)/Medium (Y)/Large (Z)
Maximum ratio
The logo content should be printed text, and the size of the logo item should comply with the requirements of Table 2. Table 2 Main items and text size in the labeling areaSerial number
Fertilizer name and trademark
Specifications, grades and categoriesbzxZ.net
Main contents of labeling
Nutrients or total nutrient composition as the main labeling content
Combination formula (single nutrient labeling value)
Items that should be separately labeled as required by product standards, such as chlorine content, citrate-soluble phosphorus, etc. Elements, nutrients or other additives that are additional labeling contentsProduct standard number
Production license number (applicable to fertilizers subject to production license management)Net content
Name of manufacturer or distributor
Address of manufacturer or distributor
Small (X)
Note: Imported fertilizers may not be labeled with items 4 and 5 in the table, but the country or region of origin (referring to Hong Kong, Macao and Taiwan) should be indicated. 10.2 The minimum height of the characters on the container for 5~25kg (or 5~25L) fertilizer shall be at least 5mm, and the rest shall comply with the provisions of Article 10.1 of this standard. 10.3 The minimum size of the label area on the container for fertilizers below 5kg (or 51) shall be 120mm×70mm, and the minimum height of the characters shall be at least 3mm, and the rest shall comply with the provisions of Article 10.1 of this standard, if the size and shape of the container permit.1.1 The percentage of a single nutrient should be indicated. 7.3.1.2 If medium and trace elements are added, medium and trace elements (calculated as single elements, the same below) can be indicated. The content of each single nutrient and the corresponding total content should be indicated according to the two types of medium and trace elements. The content of medium and trace elements shall not be added to the main nutrients. Trace element content less than 0.02% or (and) medium element content less than 2% shall not be indicated. 7.3.2 Compound fertilizers (compound fertilizers)
7.3.2.1 The percentage of total nutrients N, P.0;, K,0 should be indicated. The total nutrient indicated value should not be lower than the sum of the single nutrient indicated values in the formula. Other elements or compounds shall not be included in the total nutrients. 7.3.2.2 The percentages of total nitrogen, effective phosphorus pentoxide and potassium oxide should be indicated in the formula, such as nitrogen-phosphorus-potassium compound fertilizer 15-1515. . Binary fertilizers should be marked with "0" in the position without single nutrients, such as nitrogen-potassium compound fertilizer 15-0-10. 7.3.2.3 If medium elements and trace elements are added, they shall not be marked on the packaging container and quality certificate (except as required by national standards or industry standards).
7.3.3 Medium element fertilizers
7.3.3.1 The nutrient content of each medium element and the sum of the nutrient content of the medium elements shall be separately indicated. Single medium elements with a content of less than 2% shall not be indicated.
7.3.3.2 If trace elements are added, they may be indicated. The content of each trace element and the total content shall be separately indicated. The content of trace elements shall not be added to that of medium elements. Other requirements are the same as 7.3.1.2. 394
7.3.4 Trace element fertilizers
GB 18382—-2001
The single content of various trace elements and the sum of the trace element nutrient content should be marked separately. 7.3.5 Other fertilizers
Refer to 7.3.1 and 7.3.2 for implementation.
7.4 Content of other additives
7.4.1 If other additives are added, other additives can be marked. The content and total content of each additive should be marked separately. The content of additives and the main nutrients shall not be added together.
7.4.2 Substances or elements that need to be restricted and marked according to product standards should be marked separately. 7.51: Production license number
For products that are subject to production license management by the state, the production license number should be indicated. 7.6 The name and address of the producer or distributor shall be indicated as registered in accordance with the law The name and address of the manufacturer or distributor who is registered and can assume the responsibility for product quality. 7.7 Production date or batch number
The production date or batch number of the fertilizer product should be indicated on the product certificate, quality certificate or product outer packaging. 7.8 Fertilizer standard
7.8.1 The standard number of the fertilizer product should be indicated. 7.8.2 For fertilizer products with national or industry standards, if other elements or additives not specified in the standard are indicated, enterprise standards should be formulated. The enterprise standards should include the analysis methods of the added elements or additives, and the national standards (or industry standards) and enterprise standards should be indicated at the same time. 7.9 Warning instructions
Warning instructions should be provided if improper transportation, storage and use may cause property damage or endanger human health and safety. 7. 10 Others
7.10.1 If there are other requirements in laws, regulations and rules, they shall be in accordance with such provisions. 7.10.2 Other labels that the manufacturer deems necessary and that comply with the requirements of national laws and regulations. 8 Labels
8.1 Adhesive labels and other corresponding labels
If the size and shape of the container allow, the minimum label area of the label shall be 120mm×70mm, and the minimum text height shall be at least 3mml. The rest shall comply with the provisions of Chapter 10 of this standard. 8.2 Hanging labels
The minimum label area of the hanging label shall be 120mm×70mm, and the minimum text height shall be at least 3mm. The rest shall comply with the provisions of Chapter 10 of this standard.
9 Quality certificates or certificates of conformity
It shall comply with the provisions of GB/T14436.
10 Label printing
10.1 Containers for fertilizers larger than 25kg (or 25L) 10.1.1 Label area location and area
… A short-shaped area, the total area of which is at least 40% of the selected surface, which should be one of the main surfaces of the container, and the label content should be printed in this area. The sides of the area should be parallel to the sides of the container. All labels in the area should be printed in the order of Chinese characters in the horizontal direction, and the label content should not be printed vertically or obliquely. 10.1.2 Main item label size
Based on the area of the printed label area (10.1.1), three label sizes should be used so that the label content can be clearly arranged. These sizes should be in X/Y/Z ratio, which can be changed within the range shown in Table 1. The height of the smallest font should be at least 10mm. Table 1 Ratio of three types of logo sizes
Minimum font size
10.1.3 Minimum ratio of sizes of main items and text in the logo area
Size ratio
Small (X)/Medium (Y)/Large (Z)
Maximum ratio
The logo content should be printed text, and the size of the logo item should comply with the requirements of Table 2. Table 2 Main items and text size in the labeling areaSerial number
Fertilizer name and trademark
Specifications, grades and categories
Main contents of labeling
Nutrients or total nutrient composition as the main labeling content
Combination formula (single nutrient labeling value)
Items that should be separately labeled as required by product standards, such as chlorine content, citrate-soluble phosphorus, etc. Elements, nutrients or other additives that are additional labeling contentsProduct standard number
Production license number (applicable to fertilizers subject to production license management)Net content
Name of manufacturer or distributor
Address of manufacturer or distributor
Small (X)
Note: Imported fertilizers may not be labeled with items 4 and 5 in the table, but the country or region of origin (referring to Hong Kong, Macao and Taiwan) should be indicated. 10.2 The minimum height of the characters on the container for 5~25kg (or 5~25L) fertilizer shall be at least 5mm, and the rest shall comply with the provisions of Article 10.1 of this standard. 10.3 The minimum size of the label area on the container for fertilizers below 5kg (or 51) shall be 120mm×70mm, and the minimum height of the characters shall be at least 3mm, and the rest shall comply with the provisions of Article 10.1 of this standard, if the size and shape of the container permit.1.1 The percentage of a single nutrient should be indicated. 7.3.1.2 If medium and trace elements are added, medium and trace elements (calculated as single elements, the same below) can be indicated. The content of each single nutrient and the corresponding total content should be indicated according to the two types of medium and trace elements. The content of medium and trace elements shall not be added to the main nutrients. Trace element content less than 0.02% or (and) medium element content less than 2% shall not be indicated. 7.3.2 Compound fertilizers (compound fertilizers)
7.3.2.1 The percentage of total nutrients N, P.0;, K,0 should be indicated. The total nutrient indicated value should not be lower than the sum of the single nutrient indicated values in the formula. Other elements or compounds shall not be included in the total nutrients. 7.3.2.2 The percentages of total nitrogen, available phosphorus pentoxide and potassium oxide should be indicated in the formula, such as nitrogen-phosphorus-potassium compound fertilizer 15-1515. . Binary fertilizers should be marked with "0" in the position without single nutrients, such as nitrogen-potassium compound fertilizer 15-0-10. 7.3.2.3 If medium elements and trace elements are added, they shall not be marked on the packaging container and quality certificate (except as required by national standards or industry standards).
7.3.3 Medium element fertilizers
7.3.3.1 The nutrient content of each medium element and the sum of the nutrient content of the medium elements shall be separately indicated. Single medium elements with a content of less than 2% shall not be indicated.
7.3.3.2 If trace elements are added, they may be indicated. The content of each trace element and the total content shall be separately indicated. The content of trace elements shall not be added to that of medium elements. Other requirements are the same as 7.3.1.2. 394
7.3.4 Trace element fertilizers
GB 18382—-2001
The single content of various trace elements and the sum of the trace element nutrient content should be marked separately. 7.3.5 Other fertilizers
Refer to 7.3.1 and 7.3.2 for implementation.
7.4 Content of other additives
7.4.1 If other additives are added, other additives can be marked. The content and total content of each additive should be marked separately. The content of additives and the main nutrients shall not be added together.
7.4.2 Substances or elements that need to be restricted and marked according to product standards should be marked separately. 7.51: Production license number
For products that are subject to production license management by the state, the production license number should be indicated. 7.6 The name and address of the producer or distributor shall be indicated as registered in accordance with the law The name and address of the manufacturer or distributor who is registered and can assume the responsibility for product quality. 7.7 Production date or batch number
The production date or batch number of the fertilizer product should be indicated on the product certificate, quality certificate or product outer packaging. 7.8 Fertilizer standard
7.8.1 The standard number of the fertilizer product should be indicated. 7.8.2 For fertilizer products with national or industry standards, if other elements or additives not specified in the standard are indicated, enterprise standards should be formulated. The enterprise standards should include the analysis methods of the added elements or additives, and the national standards (or industry standards) and enterprise standards should be indicated at the same time. 7.9 Warning instructions
Warning instructions should be provided if improper transportation, storage and use may cause property damage or endanger human health and safety. 7. 10 Others
7.10.1 If there are other requirements in laws, regulations and rules, they shall be in accordance with such provisions. 7.10.2 Other labels that the manufacturer deems necessary and that comply with the requirements of national laws and regulations. 8 Labels
8.1 Adhesive labels and other corresponding labels
If the size and shape of the container allow, the minimum label area of the label shall be 120mm×70mm, and the minimum text height shall be at least 3mml. The rest shall comply with the provisions of Chapter 10 of this standard. 8.2 Hanging labels
The minimum label area of the hanging label shall be 120mm×70mm, and the minimum text height shall be at least 3mm. The rest shall comply with the provisions of Chapter 10 of this standard.
9 Quality certificates or certificates of conformity
It shall comply with the provisions of GB/T14436.
10 Label printing
10.1 Containers for fertilizers larger than 25kg (or 25L) 10.1.1 Label area location and area
… A short-shaped area, the total area of which is at least 40% of the selected surface, which should be one of the main surfaces of the container, and the label content should be printed in this area. The sides of the area should be parallel to the sides of the container. All labels in the area should be printed in the order of Chinese characters in the horizontal direction, and the label content should not be printed vertically or obliquely. 10.1.2 Main item label size
Based on the area of the printed label area (10.1.1), three label sizes should be used so that the label content can be clearly arranged. These sizes should be in X/Y/Z ratio, which can be changed within the range shown in Table 1. The height of the smallest font should be at least 10mm. Table 1 Ratio of three types of logo sizes
Minimum font size
10.1.3 Minimum ratio of sizes of main items and text in the logo area
Size ratio
Small (X)/Medium (Y)/Large (Z)
Maximum ratio
The logo content should be printed text, and the size of the logo item should comply with the requirements of Table 2. Table 2 Main items and text size in the labeling areaSerial number
Fertilizer name and trademark
Specifications, grades and categories
Main contents of labeling
Nutrients or total nutrient composition as the main labeling content
Combination formula (single nutrient labeling value)
Items that should be separately labeled as required by product standards, such as chlorine content, citrate-soluble phosphorus, etc. Elements, nutrients or other additives that are additional labeling contentsProduct standard number
Production license number (applicable to fertilizers subject to production license management)Net content
Name of manufacturer or distributor
Address of manufacturer or distributor
Small (X)
Note: Imported fertilizers may not be labeled with items 4 and 5 in the table, but the country or region of origin (referring to Hong Kong, Macao and Taiwan) should be indicated. 10.2 The minimum height of the characters on the container for 5~25kg (or 5~25L) fertilizer shall be at least 5mm, and the rest shall comply with the provisions of Article 10.1 of this standard. 10.3 The minimum size of the label area on the container for fertilizers below 5kg (or 51) shall be 120mm×70mm, and the minimum height of the characters shall be at least 3mm, and the rest shall comply with the provisions of Article 10.1 of this standard, if the size and shape of the container permit.51: Production license number
Products subject to production license management by the state shall be marked with the number of the production license. 7.6 The name and address of the producer or distributor shall indicate the name and address of the producer or distributor who has been registered in accordance with the law and can bear the product quality responsibility. 7.7 Production date or batch number
The production date or batch number of the fertilizer product shall be indicated on the product certificate, quality certificate or product outer packaging. 7.8 Fertilizer standard
7.8.1 The standard number of the fertilizer product shall be indicated. 7.8.2 For fertilizer products with national or industry standards, if other elements or additives not specified in the standard are indicated, enterprise standards shall be formulated. The enterprise standards shall include the analytical methods of the added elements or additives, and the national standards (or industry standards) and enterprise standards shall be indicated at the same time. 7.9 Warning instructions
Warning instructions shall be provided if improper transportation, storage and use may cause property damage or endanger human health and safety. 7. 10 Others
7.10.1 If there are other requirements in laws, regulations and rules, they shall be in accordance with such provisions. 7.10.2 Other labels that the manufacturer deems necessary and that comply with the requirements of national laws and regulations. 8 Labels
8.1 Adhesive labels and other corresponding labels
If the size and shape of the container allow, the minimum label area of the label shall be 120mm×70mm, and the minimum text height shall be at least 3mml. The rest shall comply with the provisions of Chapter 10 of this standard. 8.2 Hanging labels
The minimum label area of the hanging label shall be 120mm×70mm, and the minimum text height shall be at least 3mm. The rest shall comply with the provisions of Chapter 10 of this standard.
9 Quality certificates or certificates of conformity
It shall comply with the provisions of GB/T14436.
10 Label printing
10.1 Containers for fertilizers larger than 25kg (or 25L) 10.1.1 Label area location and area
… A short-shaped area, the total area of which is at least 40% of the selected surface, which should be one of the main surfaces of the container, and the label content should be printed in this area. The sides of the area should be parallel to the sides of the container. All labels in the area should be printed in the order of Chinese characters in the horizontal direction, and the label content should not be printed vertically or obliquely. 10.1.2 Main item label size
Based on the area of the printed label area (10.1.1), three label sizes should be used so that the label content can be clearly arranged. These sizes should be in X/Y/Z ratio, which can be changed within the range shown in Table 1. The height of the smallest font should be at least 10mm. Table 1 Ratio of three types of logo sizes
Minimum font size
10.1.3 Minimum ratio of sizes of main items and text in the logo area
Size ratio
Small (X)/Medium (Y)/Large (Z)
Maximum ratio
The logo content should be printed text, and the size of the logo item should comply with the requirements of Table 2. Table 2 Main items and text size in the labeling areaSerial number
Fertilizer name and trademark
Specifications, grades and categories
Main contents of labeling
Nutrients or total nutrient composition as the main labeling content
Combination formula (single nutrient labeling value)
Items that should be separately labeled as required by product standards, such as chlorine content, citrate-soluble phosphorus, etc. Elements, nutrients or other additives that are additional labeling contentsProduct standard number
Production license number (applicable to fertilizers subject to production license management)Net content
Name of manufacturer or distributor
Address of manufacturer or distributor
Small (X)
Note: Imported fertilizers may not be labeled with items 4 and 5 in the table, but the country or region of origin (referring to Hong Kong, Macao and Taiwan) should be indicated. 10.2 The minimum height of the characters on the container for 5~25kg (or 5~25L) fertilizer shall be at least 5mm, and the rest shall comply with the provisions of Article 10.1 of this standard. 10.3 The minimum size of the label area on the container for fertilizers below 5kg (or 51) shall be 120mm×70mm, and the minimum height of the characters shall be at least 3mm, and the rest shall comply with the provisions of Article 10.1 of this standard, if the size and shape of the container permit.51: Production license number
Products subject to production license management by the state shall be marked with the number of the production license. 7.6 The name and address of the producer or distributor shall indicate the name and address of the producer or distributor who has been registered in accordance with the law and can bear the product quality responsibility. 7.7 Production date or batch number
The production date or batch number of the fertilizer product shall be indicated on the product certificate, quality certificate or product outer packaging. 7.8 Fertilizer standard
7.8.1 The standard number of the fertilizer product shall be indicated. 7.8.2 For fertilizer products with national or industry standards, if other elements or additives not specified in the standard are indicated, enterprise standards shall be formulated. The enterprise standards shall include the analytical methods of the added elements or additives, and the national standards (or industry standards) and enterprise standards shall be indicated at the same time. 7.9 Warning instructions
Warning instructions shall be provided if improper transportation, storage and use may cause property damage or endanger human health and safety. 7. 10 Others
7.10.1 If there are other requirements in laws, regulations and rules, they shall be in accordance with such provisions. 7.10.2 Other labels that the manufacturer deems necessary and that comply with the requirements of national laws and regulations. 8 Labels
8.1 Adhesive labels and other corresponding labels
If the size and shape of the container allow, the minimum label area of the label shall be 120mm×70mm, and the minimum text height shall be at least 3mml. The rest shall comply with the provisions of Chapter 10 of this standard. 8.2 Hanging labels
The minimum label area of the hanging label shall be 120mm×70mm, and the minimum text height shall be at least 3mm. The rest shall comply with the provisions of Chapter 10 of this standard.
9 Quality certificates or certificates of conformity
It shall comply with the provisions of GB/T14436.
10 Label printing
10.1 Containers for fertilizers larger than 25kg (or 25L) 10.1.1 Label area location and area
… A short-shaped area, the total area of which is at least 40% of the selected surface, which should be one of the main surfaces of the container, and the label content should be printed in this area. The sides of the area should be parallel to the sides of the container. All labels in the area should be printed in the order of Chinese characters in the horizontal direction, and the label content should not be printed vertically or obliquely. 10.1.2 Main item label size
Based on the area of the printed label area (10.1.1), three label sizes should be used so that the label content can be clearly arranged. These sizes should be in X/Y/Z ratio, which can be changed within the range shown in Table 1. The height of the smallest font should be at least 10mm. Table 1 Ratio of three types of logo sizes
Minimum font size
10.1.3 Minimum ratio of sizes of main items and text in the logo area
Size ratio
Small (X)/Medium (Y)/Large (Z)
Maximum ratio
The logo content should be printed text, and the size of the logo item should comply with the requirements of Table 2. Table 2 Main items and text size in the labeling areaSerial number
Fertilizer name and trademark
Specifications, grades and categories
Main contents of labeling
Nutrients or total nutrient composition as the main labeling content
Combination formula (single nutrient labeling value)
Items that should be separately labeled as required by product standards, such as chlorine content, citrate-soluble phosphorus, etc. Elements, nutrients or other additives that are additional labeling contentsProduct standard number
Production license number (applicable to fertilizers subject to production license management)Net content
Name of manufacturer or distributor
Address of manufacturer or distributor
Small (X)
Note: Imported fertilizers may not be labeled with items 4 and 5 in the table, but the country or region of origin (referring to Hong Kong, Macao and Taiwan) should be indicated. 10.2 The minimum height of the characters on the container for 5~25kg (or 5~25L) fertilizer shall be at least 5mm, and the rest shall comply with the provisions of Article 10.1 of this standard. 10.3 The minimum size of the label area on the container for fertilizers below 5kg (or 51) shall be 120mm×70mm, and the minimum height of the characters shall be at least 3mm, and the rest shall comply with the provisions of Article 10.1 of this standard, if the size and shape of the container permit.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.