JB/T 5995-1992 Regulations on preparation of operating instructions for electromechanical products
Some standard content:
J01
JB
Mechanical Industry Standard of the People's Republic of China
JB/T5995—92
Industrial Product Instructions
Regulations on the Preparation of Instructions for Electromechanical Products
1992-07-17 Issued
Implementation by the Ministry of Machinery and Electronics Industry of the People's Republic of China on 1993-07-01
Issued
Mechanical Industry Standard of the People's Republic of China
Industrial Product Instructions
Regulations on the Preparation of Instructions for Electromechanical Products
1 Subject Content and Applicable Scope
JB/T599592
This standard specifies the basic content and compilation method of the instruction manual for electromechanical products (hereinafter referred to as the instruction manual). This standard applies to products such as machinery, electrical appliances, and instruments and meters. 2 Reference standards
GB 1.1
GB9969.1
Guidelines for standardization work Basic provisions for the preparation of standards General principles for instructions for use of industrial products
3 Basic requirements and general provisions
The basic requirements and general provisions for instructions for use shall comply with the provisions of GB9969.1. 4 Basic contents
4.1 Cover
The cover shall generally include: product model, name, name of the sub-volume content, the words "instruction manual", country name, factory name, and trademarks are allowed. Note: Instructions for use without sub-volumes do not include the name of the sub-volume content. 4.2 Table of contents
The preparation of the table of contents for instructions for use shall comply with the provisions of GB1.1. 4.3 Main uses and scope of application
Briefly describe the main uses of the product, the scope of application, and the scope of use that can be expanded by matching with certain products, and list the product standard number based on which the product is based.
4.4 Product working conditions
Applicable working conditions and working environment for the product. If necessary, the working conditions and working environment that the product is not applicable to can be specified. 4.5 Main specifications and technical parameters
Briefly describe the main specifications of the product and the technical parameters related to use and installation. 4.6 Overview of the main structure of the product
Briefly describe the overall structure of the product or the structure and performance of the main components (main functional blocks), and provide necessary graphics. 4.7 Product system description
4.7.1 Mechanical transmission system
Briefly describe the mechanical transmission of the product, and draw a system diagram if necessary. 4.7.2 Electrical system
a.
The working principle of the electrical system, the performance curve, the operation of the control system, and the working conditions of the line protection device: draw a system diagram or circuit diagram if necessary;
b. The voltage, frequency, capacity, etc. of the main electrical equipment and power supply, and explain the model, name, specification, and quantity of electrical components if necessary; c. Describe the safety measures when using and repairing the electrical system. Approved by the Ministry of Machinery and Electronics Industry on July 17, 1992 and implemented on July 1, 1993.
1
4.7.3 Hydraulic system
JB/T599592
a: The main structure, working principle, working pressure and adjustment method of the hydraulic system, and draw the hydraulic principle diagram when necessary; the main parameters of the hydraulic components, and explain the model, name, specification and quantity of the hydraulic components when necessary: ??b,
C. Describe the possible faults of the hydraulic system and their troubleshooting methods. 4.7.4 Pneumatic system
a: The working principle, working pressure and adjustment method of the pneumatic system, and draw the pneumatic principle diagram when necessary; b, the main parameters of the pneumatic components, and explain the model, name, specification and quantity of the pneumatic components when necessary. 4.7.5 Optical system
Briefly describe the working principle of the optical system, and draw the optical system diagram when necessary. 4.7.6 Other systems
Briefly describe the working principle of the system, and draw the system diagram when necessary. 4.8 Lifting and Storage
a.
Precautions for lifting (such as lifting position, direction, speed, etc.), attach lifting diagram if necessary: ??product requirements for transportation and precautions during transportation; b.
Product storage conditions and precautions.
c.
4.9 Installation and Adjustment (Debugging)bZxz.net
Pre-installation inspection, installation procedures, installation methods, installation dimensions, requirements for foundation (attach installation foundation diagram if necessary); a.
Adjustment (debugging) procedures, methods, requirements, parameter indicators that should be achieved during debugging. Instruments and equipment required for debugging and precautions. b.
4.10 Use and operation
a, Preparation and inspection before use;
Safety and safety protection before and during use: b.
Operation procedures, methods, precautions and common misoperation and preventive measures; c.
d, Monitoring and recording during operation
4.11 Maintenance and care
Maintenance and care requirements for the product and its main structure. 4.12 Common faults and their troubleshooting methods
Common fault characteristics during the use of the product, possible locations, causes, inspection and troubleshooting methods. 4.13 Accessories and wearing parts
a, Describe the performance, structure, installation, commissioning, use and maintenance methods of the accessories when necessary; b, List the names, model specifications, drawing codes or drawings of the main wearing parts, and explain the replacement methods when necessary. 4.14 Completeness
List of the main machine, auxiliary machine (or additional device) and other accessories of the product. 5 The basic contents specified in this standard may be appropriately increased or decreased according to the characteristics and specific conditions of the products in each industry. Additional notes:
This standard was proposed by the Mechanical Standardization Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by the Mechanical Standardization Research Institute of the Ministry of Machinery and Electronics Industry, Beijing No. 2 Machine Tool Factory, and Beijing Instrument Factory. The main drafters of this standard are Zhuang Jiazhen, Zhang Xiafeng, and Wang Zhongkui. 2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.