JB/T 9930.1-1999 Vertical Band Saw Parameters JB/T9930.1-1999 Standard Download Decompression Password: www.bzxz.net

IC575.080.30
Machinery Industry Standard of the People's Republic of China
JB/T 9930.1-9930.4—1999
Vertical Band Saw
1999-05-20 Issued
National Bureau of Machinery Industry
2000-01-01 ImplementationbZxz.net
JB/T9930.1—1999
This standard is revised on the basis of ZBJ5700187 "Parameters of Vertical Band Saw". This standard is consistent with the technical content of ZBJ5700187 and has reconfirmed the relevant specifications. This standard is part of the JB/T9930 "Vertical Band Saw" series of standards. This series of standards includes the following four parts: JB/F9930.1-1999 Vertical Band Saw Machine Parameters JB9930.2-1999 Vertical Band Saw Machine Series FB/T9930.3-1999 Vertical Band Saw Machine Accuracy Inspection JE9930.4-1999 Vertical Band Saw Machine Technical Planning This standard has replaced ZBJ5001-87 since its implementation. This standard was proposed by the National Technical Committee for Standardization of Slicing Machine Tools. This standard is the National Technical Committee for Standardization of Metal Slicing Machine Tools. The sponsor of this standard is Hunan Machine Tool. This standard was first issued in July 1987. This standard specifies the parameters of vertical band saw machines. Parameters
99301-1999
ZBJ57001-8
This standard applies to general-purpose vertical belt lathes with maximum lathe thickness of 125-.500mm. Z Parameters
The type of machine tool is shown in Figure 1 and Figure 2. The parameters of the machine tool are in accordance with the provisions of Table 1. Figure 1
Maximum cutting thickness
Ordinary type
Approved by the Machinery Industry Bureau on May 20, 19997
Figure 2 Large throat depth type
Implemented on January 1, 2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.